فصول الدورة
التدريب · المسار 3. السلوك والمعمارية · الفصل 3.6 من 6
3.6 الميزانيات وTPMs 3:31
اجمع كتلة المحطة مع الاحتياطي والهامش، ثم تتبّعها بوصفها مقياسًا للأداء الفني.
يعرض Holarch 2.13.
ما ستتعلمه
- أعدّ ميزانية على أصل جذر بكمية ووحدة وهامش مطلوب
- أدخل قيمًا بأساس واقرأ كيف يتغير الاحتياطي والهامش
- اضبط مخصصًا واقرأ حالة هامش سطر
- أنشئ TPM بعتبة وهدف ومعلم ولقطة
ابنِ ميزانية كتلة لـ Bike-Share Dock من أجزائها، بالأعداد والأسس والاحتياطي، واضبط مخصصًا واقرأ الهامش، ثم أنشئ مقياسًا للأداء الفني لكتلة المحطة بعتبة وهدف ومعلم مخطط ولقطة.
ملفات المشاريع
- مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
- المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.
التطبيق العملي
نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.
- افتح مشروع EO-1 التوضيحي الخاص بك، أو أنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة).
- افتح البنية ← الميزانيات وTPMs. في علامة التبويب الميزانية، أبقِ 1 EO-1 Spacecraft جذرًا وغيّر الكمية إلى استهلاك القدرة.
- اعثر على 1.1 Payload Camera (6.2 W، مقدَّر) وغيّر الأساس إلى مقيس. واقرأ كيف يتغير احتياطيه وهامش المركبة الفضائية.
- في قاعدة البيانات، أنشئ Measure بـ + عنصر جديد:
ADCS Mass، بالرقمTPM-4. اضبط الوحدات علىkg، وقيمة العتبة على1.35 kg، والقيمة المستهدفة على1.2 kg، واتجاه التحسن على Negative، وأضف التسمية TPM، واربطه بـ 1.2 ADCS بالعلاقة specified by. - في علامة التبويب مقاييس TPM، حدّد TPM-4 ADCS Mass. اكتب كتلة ADCS من علامة تبويب الميزانية (الكمية الكتلة، CBE + الاحتياطي) في التقدير الحالي، وانقر + معلم لإضافة
CDRبقيمة مخططة1.3 kg، ثم انقر التقاط لقطة.
تنتهي حين يُدرج TPM-4 ADCS Mass بحالة، ومعلم CDR في ملفه المخطط، ونقطة لقطة في سجل تقديراته.
اختبر نفسك
- لماذا يعتمد الاحتياطي على أساس القيمة؟
- كيف يُحسب الهامش، ومتى يحذّر سطر؟
- ماذا يضيف TPM إلى الميزانية؟
- ما الذي يجعل Measure مقياس TPM في Holarch؟
إظهار الإجابات
لماذا يعتمد الاحتياطي على أساس القيمة؟
التقدير أقل يقينًا من الحساب، والحساب أقل يقينًا من القياس. والاحتياطي بحسب الأساس (15 و10 و3% في العرض التوضيحي) يحمل هامشًا أكبر حيث يكون الرقم أقل يقينًا.
كيف يُحسب الهامش، ومتى يحذّر سطر؟
الهامش هو المخصص ناقص أفضل تقدير حالي مضافًا إليه الاحتياطي. ويعرض السطر ▲ منخفض حين يكون الهامش دون الهامش المطلوب، و✕ تجاوز حين يتخطى مخصصه.
ماذا يضيف TPM إلى الميزانية؟
تعرض الميزانية التجميع الحالي. أما TPM فيتتبع رقمًا حرجًا واحدًا طوال عمر المشروع مقابل ملف مخطط وعتبة وهدف، فيظهر الاتجاه نحو التجاوز قبل المراجعات.
ما الذي يجعل Measure مقياس TPM في Holarch؟
التسمية TPM. تُدرج عناصر Measure التي تحملها في علامة التبويب «مقاييس TPM»، مع المتطلبات التي لها قيمة عتبة.
قراءة المزيد
النص المكتوب
إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)
Introduction
Welcome back. A design is only as good as its margins. This last chapter of the track puts numbers on the dock's mass.
You will build a mass budget, and a technical performance measure that tracks it over time.
The budget
Open Architecture, then Budgets. Choose the root asset: the Bike-Share Dock. The quantity is mass, in kilograms. Every part under the dock gets a row.
On screen: Architecture → Budgets → root S.0; unit kg.
Enter each part's mass in the unit value column. A docking bay weighs fifty-five kilograms, and the dock has ten of them, so set its count to ten.
On screen: Docking Bay: 55, count 10.
The kiosk is a hundred and forty kilograms, the charging unit eighty, and the power supply thirty. The dock's row shows the sum of its parts.
On screen: Kiosk 140, Charging Unit 80, Power Supply 30.
Contingency and margin
Each value has a basis: estimated, calculated or measured. Contingency follows the basis, so a guess carries more than a part that has been weighed. Here every value is still an estimate.
On screen: Basis and contingency columns.
Set the allocation on the dock: nine hundred kilograms, the most the installation site can carry. The status says over: with fifteen percent contingency on every estimate, the dock comes to nine hundred and twenty kilograms, twenty over.
On screen: Allocation 900 on S.0 → Over allocation.
The docking bays are the biggest item. Once a bay has been weighed, its basis is measured, and its contingency drops to three percent. Set the docking bay's basis to Measured.
On screen: Docking Bay → Basis: Measured.
Now the dock is forty-six kilograms under its allocation, a margin of five percent. The project asks for ten, so the status still warns: the design needs either lighter parts or a larger allocation.
On screen: Margin 46 kg (5.11%) → Margin below 10%.
A technical performance measure
A budget is today's number. A technical performance measure, a TPM, tracks one critical number over the life of the project. Create a Measure in the Database: Dock Mass, numbered TPM one, in kilograms.
On screen: Database → New Entity: Measure TPM-1 Dock Mass.
Its threshold is nine hundred kilograms, the limit it must not pass, and its objective is eight hundred, the value the design aims for. For mass, lower is better, so its improvement direction is negative.
On screen: Units, Threshold 900, Objective 800, Improvement Direction.
What makes it a TPM is its label. Under Labels, click plus Label, and choose TPM.
On screen: Labels → + Label → TPM.
Back in Budgets, open the TPMs tab. Dock Mass is listed, with its threshold and objective.
On screen: Budgets → TPMs.
Track it
Enter the current estimate from the budget, eight hundred and fifty-four kilograms. Add a milestone: the preliminary design review on the first of December, planned at eight hundred and eighty. Take a snapshot, and today's estimate joins the history. At every review, the chart shows whether the dock is on track, long before anything is built.
On screen: Current estimate; + Milestone; Take Snapshot.
Recap
Let's recap. You built a mass budget from the parts with counts, bases and contingency, set an allocation and read the margin, and created a TPM with a threshold, an objective, a milestone and a snapshot.
That completes Behavior and Architecture. You can now model functions and their flow, action diagrams, allocation, interfaces, simulation, budgets and TPMs.
On screen: Track complete card, then end card.