Holarch
فصول الدورة

التدريب · المسار 1. البدء · الفصل 1.4 من 8

1.4 مخططك الأول 4:00

ارسم النموذج، وأضف إليه على المخطط، وشاهد نموذجًا واحدًا في كل عرض.

يعرض Holarch 1.27.

→ 1.3 السمات والعلاقات · كل الفصول · 1.5 المستندات ←

ما ستتعلمه

  • أنشئ مخطط Asset لنظام من «+ مخطط جديد»
  • اعرض على المخطط الوظائف التي ينفّذها كل جزء
  • أضف جزءًا وقناة على المخطط واعثر عليهما في قاعدة البيانات
  • بدّل نوع المخطط لعرض العناصر نفسها كتسلسل هرمي
  • أنشئ مخطط Spider يعرض التتبع حول متطلب واحد

أنشئ مخطط أصول لـ Bike-Share Dock من عنصر النظام الموجود: يرسم Holarch أجزاءه ووظائفها من العلاقات. أضف المكتب الخلفي الخارجي وقناة، وجزءًا جديدًا وكبل طاقة، وأعد تسمية جزء على المخطط وشاهد التغيير في قاعدة البيانات، ثم اعرض العناصر نفسها كتسلسل هرمي وتتبّع متطلبًا بمخطط Spider.

ملفات المشاريع

  • مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
  • المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)

يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.

التطبيق العملي

نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.

  1. افتح مشروع EO-1 التوضيحي الخاص بك (أو أنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة)).
  2. انقر المخططات أسفل الشريط الجانبي، ثم + مخطط جديد. واختر مخطط Asset، واكتب EPS في مخطط لـ، واختر 1.3 EPS وانقر إنشاء. وفعّل الـ Actions المؤداة لترى الوظيفة التي يؤديها كل جزء.
  3. اختر + أصل ▾ ← Asset تابع جديد… وأنشئ Battery Heater. وانقر ⋯ (إجراءات أخرى) في شريط أدوات المخطط، ثم + Conduit: من Battery Pack إلى Battery Heater، باسم Heater Power Line. ثم اختر ترتيب ▾ ← ترتيب التخطيط.
  4. افتح قاعدة البيانات واعثر على Battery Heater وHeater Power Line صفَّين جديدين.
  5. بالعودة إلى علامة تبويب المخطط، بدّل النوع إلى مخطط التسلسل الهرمي بمحدد النوع.
  6. أنشئ مخطط Spider لـ 3.2 Battery Capacity وأبقِ المستوى على 2.

تنتهي حين يعرض مخطط Spider لـ 3.2 العنصر Battery Pack الذي يحققه وTC-07 Battery Capacity Test الذي يتحقق منه.

اختبر نفسك

  1. لا تحذف شيئًا، لكنك تعيد تسمية جزء في مخطط. أين يظهر الاسم الجديد أيضًا؟
  2. لماذا يعرض مخطط Asset جديد لـ 1.3 EPS ثلاثة أجزاء بالفعل؟
  3. متى يكون مخطط Spider أكثر فائدة من مخطط Asset؟
إظهار الإجابات
  1. لا تحذف شيئًا، لكنك تعيد تسمية جزء في مخطط. أين يظهر الاسم الجديد أيضًا؟

    في كل مكان يظهر فيه العنصر: قاعدة البيانات والمستندات والمخططات الأخرى ولوحة الخصائص. فالمخطط عرض للنموذج، وليس رسمًا منفصلًا.

  2. لماذا يعرض مخطط Asset جديد لـ 1.3 EPS ثلاثة أجزاء بالفعل؟

    يقرأ المخطط علاقات decomposed by الموجودة أصلًا في النموذج، فتُرسم الأجزاء دون أي وضع يدوي.

  3. متى يكون مخطط Spider أكثر فائدة من مخطط Asset؟

    عندما تريد التتبع حول عنصر واحد عبر أنواع العلاقات: الاحتياج والوظيفة والجزء والاختبار، مثلًا لتقدير أثر تغيير.

قراءة المزيد

النص المكتوب

إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)

Introduction

Chapter four: your first diagram. In Holarch a diagram is a view of the model. It draws items and relationships that already exist, and whatever you add on a diagram goes into the model.

We continue with the Bike-Share Dock, whose parts and functions we related in the last chapter.

Create a diagram

Open Diagrams at the bottom of the rail. It lists every diagram in the project. None is saved yet, but Holarch already offers derived views of the dock, because the dock has parts.

On screen: Diagrams page: derived views only.

Click New Diagram, and pick the type. An Asset Diagram shows a system and its parts.

On screen: + New Diagram → Asset Diagram.

Then choose the root, the item the diagram is about. Type the first letters of Bike-Share Dock, pick it, and click Create.

On screen: Root: S.0 Bike-Share Dock → Create.

Holarch draws the dock with the three parts you related in the last chapter. Nothing was drawn by hand: the diagram reads the decomposed by relationships.

On screen: The asset diagram.

Check Performed Actions, and each part lists the functions it performs. That is the allocation from the last chapter, now on the picture.

On screen: Performed Actions.

Add to the model on the diagram

The back office service is outside the dock, but the kiosk talks to it. Click Asset, choose Existing Asset Outside the Root, and pick Back Office Service. It appears outside the dock's border.

On screen: + Asset ▾ → Existing Asset Outside the Root… → S.4.

A conduit is a physical or data link between assets. Click Conduit, connect the kiosk to the back office service, name the link Cellular Data Link, and click Create.

On screen: + Conduit → Kiosk → Back Office Service → Cellular Data Link.

The Arrange menu tidies the picture. Click Arrange, then Tidy Layout.

On screen: Arrange ▾ → Tidy Layout.

New parts can be added on the diagram too. Click Asset, choose New Child Asset, and create the dock's power supply.

On screen: + Asset ▾ → New Child Asset… → S.5 Power Supply.

Connect it to the charging unit with a second conduit, the Power Cable, and lay the diagram out again.

On screen: + Conduit → Power Supply → Charging Unit → Power Cable; Tidy Layout.

One model, many views

Now select the kiosk. The inspector shows the same item you created in the Database. Rename it Rental Kiosk.

On screen: Select Kiosk → inspector → Rental Kiosk.

Open the Database. The kiosk is renamed there too, and the power supply and both conduits are new rows. There is only one model, and the diagram is one view of it.

On screen: Database: Rental Kiosk, Power Supply, conduits.

The same items can be drawn in other ways. Go back to the diagram's tab, and switch its type at the top to Hierarchy Diagram: the dock's breakdown as a tree.

On screen: Back to the diagram → type: Hierarchy Diagram.

A spider diagram follows the links outward from one item. On the Diagrams page, click New Diagram, choose Spider Diagram, and make the requirement Unlock a Bike its root.

On screen: Diagrams → + New Diagram → Spider → root 1.1.

Set the level to two. It shows the requirement, the need it traces to, the function that satisfies it, and the part that performs that function: the traceability you built, on one page.

On screen: Level 2.

Every diagram can be exported with Export: as a picture, a Word document, a web page or a print, for a report or a review.

On screen: Export… dialog.

Recap

Let's recap. You created an asset diagram from the dock, saw its parts and functions drawn from the model, added an external system, a part and two conduits, renamed a part on the diagram, and viewed the same items as a hierarchy and a spider diagram.

Next, you write a requirements document whose requirements are items of this same model.