פרקי הקורס
הדרכה · מסלול 3. התנהגות וארכיטקטורה · פרק 3.6 מתוך 6
3.6 תקציבים ו-TPMs 3:31
מסכמים את מסת התחנה עם רזרבה ומרווח, ואז עוקבים אחריה כמדד ביצועים טכני.
מציג את Holarch 2.13.
מה תלמדו
- להגדיר תקציב על נכס שורש עם גודל, יחידה ומרווח נדרש
- להזין ערכים עם בסיס ולקרוא איך הרזרבה והמרווח משתנים
- להגדיר הקצאה ולקרוא את סטטוס המרווח של שורה
- ליצור TPM עם סף, יעד, אבן דרך וצילום מצב
בונים תקציב מסה של Bike-Share Dock מהחלקים שלו, עם כמויות, בסיסים ורזרבה, מגדירים הקצאה וקוראים את המרווח, ואז יוצרים מדד ביצועים טכני למסת התחנה עם סף, יעד, אבן דרך מתוכננת וצילום מצב.
קובצי פרויקט
- פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
- פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.
תרגול
עשו זאת בעצמכם ב-Holarch, על פרויקט ההדגמה CubeSat EO-1.
- פותחים את פרויקט ההדגמה EO-1, או יוצרים אותו: ניהול פרויקטים ← קובצי פרויקט ▾ ← פרויקט הדגמה חדש ← CubeSat (הנדסת מערכות מודרכת).
- פותחים את ארכיטקטורה ← תקציבים ו-TPMs. בכרטיסייה תקציב משאירים את 1 EO-1 Spacecraft כשורש ומשנים את כמות ל-צריכת הספק.
- מוצאים את 1.1 Payload Camera (6.2 W, מוערך) ומשנים את ה-בסיס שלה ל-נמדד. קוראים איך הרזרבה שלה והמרווח של החללית משתנים.
- במסד הנתונים יוצרים Measure עם + פריט חדש:
ADCS Mass, מספרTPM-4. מגדירים יחידותkg, Threshold Value1.35 kg, Objective Value1.2 kgו-Improvement Direction Negative, מוסיפים את התווית TPM, ומקשרים אותו ל-1.2 ADCS עם specified by. - בכרטיסייה מדדי TPM בוחרים את TPM-4 ADCS Mass. מקלידים את מסת ה-ADCS מכרטיסיית התקציב (כמות מסה, CBE + רזרבה) כ-הערכה נוכחית, לוחצים על + אבן דרך כדי להוסיף
CDRעם ערך מתוכנן של1.3 kg, ואז לוחצים על צילום מצב.
סיימתם כש-TPM-4 ADCS Mass מופיע עם סטטוס, אבן דרך CDR בפרופיל המתוכנן שלו ונקודת צילום מצב בהיסטוריית ההערכות שלו.
בדיקה עצמית
- למה הרזרבה תלויה בבסיס של ערך?
- איך מחושב המרווח, ומתי שורה מזהירה?
- מה TPM מוסיף לתקציב?
- מה הופך Measure ל-TPM ב-Holarch?
הצגת התשובות
למה הרזרבה תלויה בבסיס של ערך?
הערכה ודאית פחות מחישוב, וחישוב ודאי פחות ממדידה. רזרבה לפי בסיס (15, 10 ו-3% בהדגמה) נותנת יותר מרווח ביטחון במקום שבו המספר ודאי פחות.
איך מחושב המרווח, ומתי שורה מזהירה?
המרווח הוא ההקצאה פחות ההערכה הטובה ביותר הנוכחית ועוד הרזרבה. שורה מציגה ▲ נמוך כשהמרווח נמוך מהמרווח הנדרש, ו-✕ חריגה כשהיא חורגת מההקצאה שלה.
מה TPM מוסיף לתקציב?
תקציב מציג את הסיכום של היום. TPM עוקב אחרי מספר קריטי אחד לאורך חיי הפרויקט מול פרופיל מתוכנן, סף ויעד, כך שמגמה לקראת חריגה נראית לפני הסקירות.
מה הופך Measure ל-TPM ב-Holarch?
התווית TPM. Measures שיש להם אותה מופיעים בכרטיסייה “מדדי TPM”, יחד עם דרישות שיש להן Threshold Value.
קריאה נוספת
תמליל
הצגת התמליל (הקריינות ומה שמוצג על המסך)
Introduction
Welcome back. A design is only as good as its margins. This last chapter of the track puts numbers on the dock's mass.
You will build a mass budget, and a technical performance measure that tracks it over time.
The budget
Open Architecture, then Budgets. Choose the root asset: the Bike-Share Dock. The quantity is mass, in kilograms. Every part under the dock gets a row.
On screen: Architecture → Budgets → root S.0; unit kg.
Enter each part's mass in the unit value column. A docking bay weighs fifty-five kilograms, and the dock has ten of them, so set its count to ten.
On screen: Docking Bay: 55, count 10.
The kiosk is a hundred and forty kilograms, the charging unit eighty, and the power supply thirty. The dock's row shows the sum of its parts.
On screen: Kiosk 140, Charging Unit 80, Power Supply 30.
Contingency and margin
Each value has a basis: estimated, calculated or measured. Contingency follows the basis, so a guess carries more than a part that has been weighed. Here every value is still an estimate.
On screen: Basis and contingency columns.
Set the allocation on the dock: nine hundred kilograms, the most the installation site can carry. The status says over: with fifteen percent contingency on every estimate, the dock comes to nine hundred and twenty kilograms, twenty over.
On screen: Allocation 900 on S.0 → Over allocation.
The docking bays are the biggest item. Once a bay has been weighed, its basis is measured, and its contingency drops to three percent. Set the docking bay's basis to Measured.
On screen: Docking Bay → Basis: Measured.
Now the dock is forty-six kilograms under its allocation, a margin of five percent. The project asks for ten, so the status still warns: the design needs either lighter parts or a larger allocation.
On screen: Margin 46 kg (5.11%) → Margin below 10%.
A technical performance measure
A budget is today's number. A technical performance measure, a TPM, tracks one critical number over the life of the project. Create a Measure in the Database: Dock Mass, numbered TPM one, in kilograms.
On screen: Database → New Entity: Measure TPM-1 Dock Mass.
Its threshold is nine hundred kilograms, the limit it must not pass, and its objective is eight hundred, the value the design aims for. For mass, lower is better, so its improvement direction is negative.
On screen: Units, Threshold 900, Objective 800, Improvement Direction.
What makes it a TPM is its label. Under Labels, click plus Label, and choose TPM.
On screen: Labels → + Label → TPM.
Back in Budgets, open the TPMs tab. Dock Mass is listed, with its threshold and objective.
On screen: Budgets → TPMs.
Track it
Enter the current estimate from the budget, eight hundred and fifty-four kilograms. Add a milestone: the preliminary design review on the first of December, planned at eight hundred and eighty. Take a snapshot, and today's estimate joins the history. At every review, the chart shows whether the dock is on track, long before anything is built.
On screen: Current estimate; + Milestone; Take Snapshot.
Recap
Let's recap. You built a mass budget from the parts with counts, bases and contingency, set an allocation and read the margin, and created a TPM with a threshold, an objective, a milestone and a snapshot.
That completes Behavior and Architecture. You can now model functions and their flow, action diagrams, allocation, interfaces, simulation, budgets and TPMs.
On screen: Track complete card, then end card.