コースのチャプター
トレーニング · トラック 3. 振る舞いとアーキテクチャ · チャプター 3.6(全 6 チャプター)
3.6 予算と TPM 3:31
ドックの質量を予備とマージンを含めて積み上げ、技術性能尺度として追跡します。
Holarch 2.13 の画面です。
学習内容
- 数量、単位、必要マージンを指定して、ルートアセットに予算を設定する
- 根拠付きで値を入力し、予備とマージンの変化を確認する
- 配分を設定し、行のマージンステータスを確認する
- しきい値、目標値、マイルストーン、スナップショットを持つ TPM を作成する
Bike-Share Dock の部品から、個数、根拠、予備を含む質量予算を作成し、配分を設定してマージンを確認します。その後、しきい値、目標値、計画マイルストーン、スナップショットを持つドック質量の技術性能尺度を作成します。
プロジェクトファイル
- 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
- 完成したプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。
演習
CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。
- EO-1 デモプロジェクトを開くか、作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング)。
- アーキテクチャ → 予算と TPMを開きます。予算タブで、ルートは 1 EO-1 Spacecraft のままにし、数量を Power Draw に変更します。
- 1.1 Payload Camera(6.2 W、推定値)を見つけ、その根拠を実測値に変更します。その予備と宇宙機のマージンがどう変わるかを確認します。
- データベースで + 新しい項目を使って Measure を作成します:
ADCS Mass、番号TPM-4。Units をkg、Threshold Value を1.35 kg、Objective Value を1.2 kg、Improvement Direction を Negative に設定し、ラベル TPM を追加して、specified by で 1.2 ADCS にリンクします。 - TPM タブで TPM-4 ADCS Mass を選択します。予算タブの ADCS の質量(数量 Mass、CBE + 予備)を現在の推定値として入力し、+ マイルストーンをクリックして計画値
1.3 kgのCDRを追加し、スナップショットを作成をクリックします。
TPM-4 ADCS Mass がステータス付きで表示され、計画プロファイルに CDR マイルストーン、推定値の履歴にスナップショットのポイントがあれば完了です。
確認問題
- 予備が値の根拠によって変わるのはなぜですか?
- マージンはどのように算出され、行はいつ警告を表示しますか?
- TPM は予算に何を加えますか?
- Holarch では、何によって Measure が TPM になりますか?
解答を表示
予備が値の根拠によって変わるのはなぜですか?
推定値は計算値より不確かで、計算値は実測値より不確かです。根拠別の予備(デモでは 15%、10%、3%)は、数値が不確かなほど大きな余裕を持たせます。
マージンはどのように算出され、行はいつ警告を表示しますか?
マージンは、配分から現在の最良推定値と予備の合計を引いたものです。マージンが必要マージンを下回ると行に ▲ Low が表示され、配分を超えると ✕ Over が表示されます。
TPM は予算に何を加えますか?
予算は現時点での積み上げを示します。TPM は、1 つの重要な数値をプロジェクトの期間を通じて計画プロファイル、しきい値、目標値と比較して追跡するため、逸脱に向かう傾向がレビューの前に分かります。
Holarch では、何によって Measure が TPM になりますか?
TPM ラベルです。このラベルを持つ Measure は、Threshold Value を持つ要求とともに TPM タブに一覧表示されます。
関連資料
トランスクリプト
トランスクリプトを表示 (ナレーションと画面の内容)
Introduction
Welcome back. A design is only as good as its margins. This last chapter of the track puts numbers on the dock's mass.
You will build a mass budget, and a technical performance measure that tracks it over time.
The budget
Open Architecture, then Budgets. Choose the root asset: the Bike-Share Dock. The quantity is mass, in kilograms. Every part under the dock gets a row.
On screen: Architecture → Budgets → root S.0; unit kg.
Enter each part's mass in the unit value column. A docking bay weighs fifty-five kilograms, and the dock has ten of them, so set its count to ten.
On screen: Docking Bay: 55, count 10.
The kiosk is a hundred and forty kilograms, the charging unit eighty, and the power supply thirty. The dock's row shows the sum of its parts.
On screen: Kiosk 140, Charging Unit 80, Power Supply 30.
Contingency and margin
Each value has a basis: estimated, calculated or measured. Contingency follows the basis, so a guess carries more than a part that has been weighed. Here every value is still an estimate.
On screen: Basis and contingency columns.
Set the allocation on the dock: nine hundred kilograms, the most the installation site can carry. The status says over: with fifteen percent contingency on every estimate, the dock comes to nine hundred and twenty kilograms, twenty over.
On screen: Allocation 900 on S.0 → Over allocation.
The docking bays are the biggest item. Once a bay has been weighed, its basis is measured, and its contingency drops to three percent. Set the docking bay's basis to Measured.
On screen: Docking Bay → Basis: Measured.
Now the dock is forty-six kilograms under its allocation, a margin of five percent. The project asks for ten, so the status still warns: the design needs either lighter parts or a larger allocation.
On screen: Margin 46 kg (5.11%) → Margin below 10%.
A technical performance measure
A budget is today's number. A technical performance measure, a TPM, tracks one critical number over the life of the project. Create a Measure in the Database: Dock Mass, numbered TPM one, in kilograms.
On screen: Database → New Entity: Measure TPM-1 Dock Mass.
Its threshold is nine hundred kilograms, the limit it must not pass, and its objective is eight hundred, the value the design aims for. For mass, lower is better, so its improvement direction is negative.
On screen: Units, Threshold 900, Objective 800, Improvement Direction.
What makes it a TPM is its label. Under Labels, click plus Label, and choose TPM.
On screen: Labels → + Label → TPM.
Back in Budgets, open the TPMs tab. Dock Mass is listed, with its threshold and objective.
On screen: Budgets → TPMs.
Track it
Enter the current estimate from the budget, eight hundred and fifty-four kilograms. Add a milestone: the preliminary design review on the first of December, planned at eight hundred and eighty. Take a snapshot, and today's estimate joins the history. At every review, the chart shows whether the dock is on track, long before anything is built.
On screen: Current estimate; + Milestone; Take Snapshot.
Recap
Let's recap. You built a mass budget from the parts with counts, bases and contingency, set an allocation and read the margin, and created a TPM with a threshold, an objective, a milestone and a snapshot.
That completes Behavior and Architecture. You can now model functions and their flow, action diagrams, allocation, interfaces, simulation, budgets and TPMs.
On screen: Track complete card, then end card.