Holarch
فصول الدورة

التدريب · المسار 7. اتباع عملية · الفصل 7.2 من 4

7.2 الفحوص الحية والعمل الذي تشير إليه 2:21

دع النموذج يخبرك بما أُنجز وما التالي.

يعرض Holarch 2.41.

ما ستتعلمه

  • اقرأ حالة الفحص (منجز، منجز جزئيًا، لم يبدأ) وتفاصيله
  • اتبع رابط «فتح» في الفحص إلى الصفحة التي يجري فيها العمل
  • أنجز العمل الخاص بفحص وشاهد الفحص والمرحلة يتحدثان
  • حدّد فحصًا يدويًا واشرح ما يسجّله Holarch معه

اعمل على مرحلة تحليل الاحتياجات في دليل Kossiakoff: فحوص يقرؤها Holarch من النموذج، بحالتها وتفاصيلها، ورابط «فتح» إلى الصفحة التي يجري فيها العمل، ومفهوم عمليات منشأ من قالب يجعل فحصه منجزًا، وفحوص يدوية تُحدَّد يدويًا مع من حدّدها ومتى.

ملفات المشاريع

  • مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
  • المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)

يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.

التطبيق العملي

نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.

  1. افتح مشروع EO-1 التوضيحي الخاص بك (إن لم يكن لديك واحد، فأنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة)). وافتح التخطيط ← عملية هندسة النظم واختر منهج Kossiakoff لهندسة النظم (في العملية، أو حدّده وانقر استخدام هذه العملية).
  2. في تحليل الاحتياجات، اقرأ الفحوص المنجزة وما تعدّه تفاصيلها، مثل الاحتياجات N1–N3.
  3. بجانب فحص مستند تحليل الاحتياجات، انقر فتح. وانقر + مستند جديد، وأدخل EO-1 Needs Analysis، واختر مستند تحليل الاحتياجات تحت القوالب لـ، واختر بطاقة القالب، وانقر إنشاء.
  4. عد إلى عملية هندسة النظم وتحقق من أن فحص المستند قد أُنجز وأن النسبة المئوية للمرحلة ارتفعت.
  5. حدّد الفحص اليدوي الخاص بمسح الأنظمة والتقنيات الموجودة، واقرأ من حدّده ومتى، ثم اضغط ⌘Z / Ctrl+Z وحدّده مجددًا.

تنتهي حين يكون فحص مستند تحليل الاحتياجات منجزًا ويعرض فحص المسح اسمك والوقت.

اختبر نفسك

  1. ما الفرق بين فحص بعلامة وفحص بمربع اختيار؟
  2. يسجّل EO-1 احتياجاته بوصفها Statement. لماذا تُحتسب احتياجات، بينما لا تُحتسب عناوين أقسامه؟
  3. إلى أين يأخذك «فتح»؟
إظهار الإجابات
  1. ما الفرق بين فحص بعلامة وفحص بمربع اختيار؟

    العلامة (✓ أو ◐ أو ○) تُقرأ من النموذج وتتغير بتغيره. أما مربع الاختيار فلحكم لا يستطيع النموذج إظهاره، مثل الجدوى؛ وتحديده يسجّل من حدّده ومتى.

  2. يسجّل EO-1 احتياجاته بوصفها Statement. لماذا تُحتسب احتياجات، بينما لا تُحتسب عناوين أقسامه؟

    تعدّ فحوص الاحتياجات عناصر Statement المتتبَّعة إلى المتطلبات. ولا يُحتسب قسم Statement في مستند حاجةً إلا بعد تتبعه. ولا تُحتسب الاحتياجات المسجلة بوصفها Requirement احتياجات.

  3. إلى أين يأخذك «فتح»؟

    إلى الصفحة التي يجري فيها العمل الخاص بذلك الفحص، مثل المستندات أو الجودة أو مصفوفة التتبع أو التحليل الوظيفي. ثم عد إلى عملية هندسة النظم لترى الفحص يتحدث.

قراءة المزيد

النص المكتوب

إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)

Introduction

Chapter two: live checks. Most checks in a process guide are read from the model, so they change as the model changes. The rest are checks only people can make.

We continue on the Bike-Share Dock, in the needs analysis phase of the Kossiakoff guide.

Reading a check

Open Plan and Deliver, then SE Process. Each check has a mark in front of it: a tick when it is done, a half circle when it is partly done, and an empty circle when there is nothing yet.

On screen: Plan & Deliver → SE Process; the step cards.

Under each check, a short detail says what Holarch found. Record the stakeholder needs is done: the project already has its needs as statements. The project also has top-level functions and assets, so those checks are done too.

On screen: Done checks and their details.

From a check to the work

Describe how the system will be used is not done yet. Its detail says there is no concept of operations document. Click Open next to it.

On screen: Concept of Operations check → Open.

Open goes to the page where the work happens, here Documents. Click New Document, choose the type Concept of Operations Document, name it Bike-Share Dock Concept of Operations, and click Next.

On screen: Documents → + New Document → type, name, number → Next.

Choose the outline template, and click Finish. The new document has the usual sections of a concept of operations, ready to write.

On screen: Template: Concept of Operations (Outline) → Finish.

Go back to SE Process. The check is done now, and its detail counts the document. The needs analysis phase in the life cycle shows the higher percentage.

On screen: SE Process: the check is done; the phase percentage.

Checks people make

Some checks cannot be read from the model, such as whether meeting the needs is feasible. These have a checkbox instead of a mark. When your team has made the check, tick it.

On screen: Manual check: feasibility → tick.

Holarch records who ticked it, and when. Clear the box to take it back, and like every change, a tick is one undo step.

On screen: Checked by … on ….

Recap

Let's recap. Each check shows its state and what Holarch found. Open leads to the page where the work happens, the check follows the model as you work, and the checks only people can make are ticked by hand, with who and when.

Next, you move between phases and prepare a gate review.