Holarch
Capitoli del corso

Formazione · Percorso 3. Comportamento e architettura · Capitolo 3.6 di 6

3.6 Budget e TPM 3:31

Consolidare la massa della stazione con contingenza e margine, poi monitorarla come misura delle prestazioni tecniche.

Mostra Holarch 2.13.

← 3.5 Simulazione · Tutti i capitoli

Che cosa si impara

  • Impostare un budget su un asset radice con una grandezza, un’unità e un margine richiesto
  • Inserire valori con una base e osservare come cambiano contingenza e margine
  • Impostare un’allocazione e leggere lo stato del margine di una riga
  • Creare un TPM con una soglia, un obiettivo, una milestone e un’istantanea

Costruire un budget di massa della Bike-Share Dock a partire dalle sue parti, con quantità, basi e contingenza, impostare un’allocazione e leggere il margine, poi creare una misura delle prestazioni tecniche per la massa della stazione con una soglia, un obiettivo, una milestone pianificata e un’istantanea.

File di progetto

  • Progetto iniziale (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)
  • Progetto completato (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)

Il video viene riprodotto da holarch.app; vedere l’Informativa sulla privacy.

Esercitazione

Provare in prima persona in Holarch, sul progetto demo CubeSat EO-1.

  1. Aprire il proprio progetto demo EO-1, oppure crearlo: Gestisci progetti → File di progetto ▾ → Nuovo progetto demo → CubeSat (ingegneria dei sistemi guidata).
  2. Aprire Architettura → Budget e TPM. Nella scheda Budget, mantenere 1 EO-1 Spacecraft come radice e cambiare Grandezza in Potenza assorbita.
  3. Trovare 1.1 Payload Camera (6,2 W, Stimato) e cambiarne la Base in Misurato. Osservare come cambiano la sua contingenza e il margine del veicolo spaziale.
  4. Nel Database, creare una Measure con + Nuovo elemento: ADCS Mass, numero TPM-4. Impostare Unità kg, Valore di soglia 1.35 kg, Valore obiettivo 1.2 kg e Direzione di miglioramento Negativa, aggiungere l’etichetta TPM e collegarla a 1.2 ADCS con specified by.
  5. Nella scheda TPM, selezionare TPM-4 ADCS Mass. Digitare la massa dell’ADCS dalla scheda Budget (Grandezza Massa, CBE + contingenza) come Stima attuale, fare clic su + Milestone per aggiungere CDR con un valore pianificato di 1.3 kg, poi fare clic su Scatta istantanea.

L’esercizio è completato quando TPM-4 ADCS Mass è elencato con uno stato, una milestone CDR nel profilo pianificato e un punto di istantanea nella cronologia delle stime.

Verifica

  1. Perché la contingenza dipende dalla base di un valore?
  2. Come si calcola il margine, e quando una riga dà un avviso?
  3. Che cosa aggiunge un TPM a un budget?
  4. Che cosa rende una Measure un TPM in Holarch?
Mostra le risposte
  1. Perché la contingenza dipende dalla base di un valore?

    Una stima è meno certa di un calcolo, e un calcolo meno di una misura. La contingenza in base alla base (15, 10 e 3% nella demo) prevede un margine maggiore dove il numero è meno certo.

  2. Come si calcola il margine, e quando una riga dà un avviso?

    Il margine è l’allocazione meno la stima migliore attuale più la contingenza. Una riga mostra ▲ Basso quando il margine è inferiore al margine richiesto e ✕ Superato quando supera la sua allocazione.

  3. Che cosa aggiunge un TPM a un budget?

    Un budget mostra il consolidamento di oggi. Un TPM segue un numero critico per tutta la vita del progetto rispetto a un profilo pianificato, una soglia e un obiettivo, così una tendenza verso un superamento emerge prima delle revisioni.

  4. Che cosa rende una Measure un TPM in Holarch?

    L’etichetta TPM. Le Measure che la hanno sono elencate nella scheda TPM, insieme ai requisiti che hanno un Valore di soglia.

Per saperne di più

Trascrizione

Mostra la trascrizione (narrazione e contenuto dello schermo)

Introduction

Welcome back. A design is only as good as its margins. This last chapter of the track puts numbers on the dock's mass.

You will build a mass budget, and a technical performance measure that tracks it over time.

The budget

Open Architecture, then Budgets. Choose the root asset: the Bike-Share Dock. The quantity is mass, in kilograms. Every part under the dock gets a row.

On screen: Architecture → Budgets → root S.0; unit kg.

Enter each part's mass in the unit value column. A docking bay weighs fifty-five kilograms, and the dock has ten of them, so set its count to ten.

On screen: Docking Bay: 55, count 10.

The kiosk is a hundred and forty kilograms, the charging unit eighty, and the power supply thirty. The dock's row shows the sum of its parts.

On screen: Kiosk 140, Charging Unit 80, Power Supply 30.

Contingency and margin

Each value has a basis: estimated, calculated or measured. Contingency follows the basis, so a guess carries more than a part that has been weighed. Here every value is still an estimate.

On screen: Basis and contingency columns.

Set the allocation on the dock: nine hundred kilograms, the most the installation site can carry. The status says over: with fifteen percent contingency on every estimate, the dock comes to nine hundred and twenty kilograms, twenty over.

On screen: Allocation 900 on S.0 → Over allocation.

The docking bays are the biggest item. Once a bay has been weighed, its basis is measured, and its contingency drops to three percent. Set the docking bay's basis to Measured.

On screen: Docking Bay → Basis: Measured.

Now the dock is forty-six kilograms under its allocation, a margin of five percent. The project asks for ten, so the status still warns: the design needs either lighter parts or a larger allocation.

On screen: Margin 46 kg (5.11%) → Margin below 10%.

A technical performance measure

A budget is today's number. A technical performance measure, a TPM, tracks one critical number over the life of the project. Create a Measure in the Database: Dock Mass, numbered TPM one, in kilograms.

On screen: Database → New Entity: Measure TPM-1 Dock Mass.

Its threshold is nine hundred kilograms, the limit it must not pass, and its objective is eight hundred, the value the design aims for. For mass, lower is better, so its improvement direction is negative.

On screen: Units, Threshold 900, Objective 800, Improvement Direction.

What makes it a TPM is its label. Under Labels, click plus Label, and choose TPM.

On screen: Labels → + Label → TPM.

Back in Budgets, open the TPMs tab. Dock Mass is listed, with its threshold and objective.

On screen: Budgets → TPMs.

Track it

Enter the current estimate from the budget, eight hundred and fifty-four kilograms. Add a milestone: the preliminary design review on the first of December, planned at eight hundred and eighty. Take a snapshot, and today's estimate joins the history. At every review, the chart shows whether the dock is on track, long before anything is built.

On screen: Current estimate; + Milestone; Take Snapshot.

Recap

Let's recap. You built a mass budget from the parts with counts, bases and contingency, set an allocation and read the margin, and created a TPM with a threshold, an objective, a milestone and a snapshot.

That completes Behavior and Architecture. You can now model functions and their flow, action diagrams, allocation, interfaces, simulation, budgets and TPMs.

On screen: Track complete card, then end card.