Kurs bölümleri
Eğitim · Kurs 3. Davranış ve mimari · Bölüm 3.6 / 6
3.6 Bütçeler ve TPM'ler 3:31
Rıhtımın kütlesini ihtiyat payı ve marjla toplayın, ardından bir teknik performans ölçüsü olarak izleyin.
Holarch 2.13 sürümünü gösterir.
Neler öğreneceksiniz
- Bir kök varlık üzerinde bir nicelik, bir birim ve gereken marjla bir bütçe kurun
- Değerleri bir dayanakla girin ve ihtiyat payı ile marjın nasıl değiştiğini okuyun
- Bir tahsis belirleyin ve bir satırın marj durumunu okuyun
- Bir eşik, bir hedef, bir kilometre taşı ve bir anlık görüntüyle bir TPM oluşturun
Bike-Share Dock'un parçalarından adetler, dayanaklar ve ihtiyat payıyla bir kütle bütçesi oluşturun, bir tahsis belirleyin ve marjı okuyun; ardından rıhtımın kütlesi için bir eşik, bir hedef, planlanmış bir kilometre taşı ve bir anlık görüntüyle bir teknik performans ölçüsü oluşturun.
Proje dosyaları
- Başlangıç projesi (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
- Bitmiş proje (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
Video holarch.app'ten oynatılır; bkz. Gizlilik Politikası.
Alıştırma
Bunu Holarch'ta, CubeSat EO-1 demo projesinde kendiniz yapın.
- EO-1 demo projenizi açın veya oluşturun: Projeleri yönet → Proje dosyaları ▾ → Yeni demo proje → CubeSat (Rehberli sistem mühendisliği).
- Mimari → Bütçeler ve TPM'ler'i açın. Bütçe sekmesinde kök olarak 1 EO-1 Spacecraft'i koruyun ve Nicelik'i Güç tüketimi olarak değiştirin.
- 1.1 Payload Camera'yı (6,2 W, Tahmini) bulun ve Dayanak'ını Ölçülmüş olarak değiştirin. İhtiyat payının ve uzay aracının marjının nasıl değiştiğini okuyun.
- Veritabanı'nda + Yeni öğe ile bir Measure oluşturun:
ADCS Mass, numaraTPM-4. Birimler'ikg, Eşik değeri'ni1.35 kg, Hedef değeri'ni1.2 kgve İyileşme yönü'nü Negatif olarak ayarlayın, TPM etiketini ekleyin ve onu specified by ile 1.2 ADCS'e bağlayın. - TPM'ler sekmesinde TPM-4 ADCS Mass'i seçin. Bütçe sekmesindeki ADCS kütlesini (Nicelik Kütle, CBE + ihtiyat payı) Geçerli tahmin olarak yazın, planlanan değeri
1.3 kgolanCDR'yi eklemek için + Kilometre taşı'na tıklayın, ardından Anlık görüntü al'a tıklayın.
TPM-4 ADCS Mass bir durumla, planlanan profilinde bir CDR kilometre taşıyla ve tahmin geçmişinde bir Anlık görüntü noktasıyla listelendiğinde işiniz bitmiştir.
Kendinizi sınayın
- İhtiyat payı neden bir değerin dayanağına bağlıdır?
- Marj nasıl hesaplanır ve bir satır ne zaman uyarır?
- Bir TPM bir bütçeye ne ekler?
- Holarch'ta bir Measure'ı TPM yapan nedir?
Yanıtları göster
İhtiyat payı neden bir değerin dayanağına bağlıdır?
Bir tahmin bir hesaplamadan, bir hesaplama da bir ölçümden daha az kesindir. Dayanağa göre ihtiyat payı (demoda %15, %10 ve %3), sayının daha az kesin olduğu yerde daha fazla pay bırakır.
Marj nasıl hesaplanır ve bir satır ne zaman uyarır?
Marj, tahsisten mevcut en iyi tahmin artı ihtiyat payının çıkarılmasıyla bulunur. Marj gereken marjın altındaysa satır ▲ Düşük, tahsisini aştığında ✕ Aşıldı gösterir.
Bir TPM bir bütçeye ne ekler?
Bir bütçe bugünkü toplamı gösterir. Bir TPM, kritik tek bir sayıyı projenin ömrü boyunca planlanan bir profile, bir eşiğe ve bir hedefe göre izler; böylece bir ihlale doğru eğilim incelemelerden önce görünür.
Holarch'ta bir Measure'ı TPM yapan nedir?
TPM etiketi. Bu etiketi taşıyan Measure'lar, Eşik değeri olan gereksinimlerle birlikte TPM'ler sekmesinde listelenir.
Daha fazla bilgi
Döküm
Dökümü göster (anlatım ve ekranda görünenler)
Introduction
Welcome back. A design is only as good as its margins. This last chapter of the track puts numbers on the dock's mass.
You will build a mass budget, and a technical performance measure that tracks it over time.
The budget
Open Architecture, then Budgets. Choose the root asset: the Bike-Share Dock. The quantity is mass, in kilograms. Every part under the dock gets a row.
On screen: Architecture → Budgets → root S.0; unit kg.
Enter each part's mass in the unit value column. A docking bay weighs fifty-five kilograms, and the dock has ten of them, so set its count to ten.
On screen: Docking Bay: 55, count 10.
The kiosk is a hundred and forty kilograms, the charging unit eighty, and the power supply thirty. The dock's row shows the sum of its parts.
On screen: Kiosk 140, Charging Unit 80, Power Supply 30.
Contingency and margin
Each value has a basis: estimated, calculated or measured. Contingency follows the basis, so a guess carries more than a part that has been weighed. Here every value is still an estimate.
On screen: Basis and contingency columns.
Set the allocation on the dock: nine hundred kilograms, the most the installation site can carry. The status says over: with fifteen percent contingency on every estimate, the dock comes to nine hundred and twenty kilograms, twenty over.
On screen: Allocation 900 on S.0 → Over allocation.
The docking bays are the biggest item. Once a bay has been weighed, its basis is measured, and its contingency drops to three percent. Set the docking bay's basis to Measured.
On screen: Docking Bay → Basis: Measured.
Now the dock is forty-six kilograms under its allocation, a margin of five percent. The project asks for ten, so the status still warns: the design needs either lighter parts or a larger allocation.
On screen: Margin 46 kg (5.11%) → Margin below 10%.
A technical performance measure
A budget is today's number. A technical performance measure, a TPM, tracks one critical number over the life of the project. Create a Measure in the Database: Dock Mass, numbered TPM one, in kilograms.
On screen: Database → New Entity: Measure TPM-1 Dock Mass.
Its threshold is nine hundred kilograms, the limit it must not pass, and its objective is eight hundred, the value the design aims for. For mass, lower is better, so its improvement direction is negative.
On screen: Units, Threshold 900, Objective 800, Improvement Direction.
What makes it a TPM is its label. Under Labels, click plus Label, and choose TPM.
On screen: Labels → + Label → TPM.
Back in Budgets, open the TPMs tab. Dock Mass is listed, with its threshold and objective.
On screen: Budgets → TPMs.
Track it
Enter the current estimate from the budget, eight hundred and fifty-four kilograms. Add a milestone: the preliminary design review on the first of December, planned at eight hundred and eighty. Take a snapshot, and today's estimate joins the history. At every review, the chart shows whether the dock is on track, long before anything is built.
On screen: Current estimate; + Milestone; Take Snapshot.
Recap
Let's recap. You built a mass budget from the parts with counts, bases and contingency, set an allocation and read the margin, and created a TPM with a threshold, an objective, a milestone and a snapshot.
That completes Behavior and Architecture. You can now model functions and their flow, action diagrams, allocation, interfaces, simulation, budgets and TPMs.
On screen: Track complete card, then end card.