課程章節
培訓 · 第 3 單元:行為與架構 · 第 3.6 章,共 6 章
3.6 預算和 TPM 3:31
以應變餘裕與裕度彙總停車站的質量,然後將其作為技術性能量測進行追蹤。
展示 Holarch 2.13。
您將學到
- 在根資產上設定預算,包含量、單位與所需裕度
- 輸入帶有依據的值,並觀察應變餘裕與裕度如何變化
- 設定配額,並讀取一行的裕度狀態
- 建立含門檻、目標、里程碑與快照的 TPM
從 Bike-Share Dock 的零件建立其質量預算,包含數量、依據與應變餘裕,設定配額並讀取裕度,然後為停車站的質量建立技術性能量測,包含門檻、目標、計畫里程碑與快照。
練習
在 Holarch 中於 CubeSat EO-1 示範專案上親自操作。
- 開啟您的 EO-1 示範專案,或建立它:管理專案 → 專案檔案 ▾ → 新增示範專案 → CubeSat(引導式系統工程)。
- 開啟架構 → 預算和 TPM。在預算分頁上,保留 1 EO-1 Spacecraft 作為根,並將量改為 Power Draw。
- 找到 1.1 Payload Camera(6.2 W,估計值),並將其 Basis 改為實測值。觀察其應變餘裕與太空船的裕度如何變化。
- 在資料庫中,以 + 新增項目建立一個 Measure:
ADCS Mass,編號TPM-4。將單位設為kg、Threshold Value 設為1.35 kg、Objective Value 設為1.2 kg、Improvement Direction 設為 Negative,加上標籤 TPM,並以 specified by 將其關聯到 1.2 ADCS。 - 在 TPM 分頁上,選取 TPM-4 ADCS Mass。輸入預算分頁中的 ADCS 質量(量為 Mass,CBE + 應變餘裕)作為目前估計,按一下 + 里程碑新增計畫值為
1.3 kg的CDR,然後按一下建立快照。
當 TPM-4 ADCS Mass 列出狀態、其計畫曲線中有 CDR 里程碑,且其估計歷程中有快照點時,即完成。
自我檢查
- 為什麼應變餘裕取決於值的依據?
- 裕度如何計算?一行何時會發出警告?
- TPM 為預算增加了什麼?
- 在 Holarch 中,什麼讓 Measure 成為 TPM?
顯示答案
為什麼應變餘裕取決於值的依據?
估計值比計算值更不確定,計算值又比實測值更不確定。依依據設定的應變餘裕(示範中為 15、10 與 3%)會在數字較不確定之處保留更多餘量。
裕度如何計算?一行何時會發出警告?
裕度是配額減去目前最佳估計值加應變餘裕後的結果。當裕度低於所需裕度時,該行顯示 ▲ 偏低;超出其配額時顯示 ✕ 超出。
TPM 為預算增加了什麼?
預算顯示今天的彙總。TPM 則在專案的整個生命週期中,對照計畫曲線、門檻與目標追蹤一個關鍵數字,因此在審查之前就能看出趨向超限的走勢。
在 Holarch 中,什麼讓 Measure 成為 TPM?
TPM 標籤。帶有此標籤的 Measure 會列在 TPM 分頁上,連同具有 Threshold Value 的需求。
延伸閱讀
文字稿
顯示文字稿 (旁白與畫面內容)
Introduction
Welcome back. A design is only as good as its margins. This last chapter of the track puts numbers on the dock's mass.
You will build a mass budget, and a technical performance measure that tracks it over time.
The budget
Open Architecture, then Budgets. Choose the root asset: the Bike-Share Dock. The quantity is mass, in kilograms. Every part under the dock gets a row.
On screen: Architecture → Budgets → root S.0; unit kg.
Enter each part's mass in the unit value column. A docking bay weighs fifty-five kilograms, and the dock has ten of them, so set its count to ten.
On screen: Docking Bay: 55, count 10.
The kiosk is a hundred and forty kilograms, the charging unit eighty, and the power supply thirty. The dock's row shows the sum of its parts.
On screen: Kiosk 140, Charging Unit 80, Power Supply 30.
Contingency and margin
Each value has a basis: estimated, calculated or measured. Contingency follows the basis, so a guess carries more than a part that has been weighed. Here every value is still an estimate.
On screen: Basis and contingency columns.
Set the allocation on the dock: nine hundred kilograms, the most the installation site can carry. The status says over: with fifteen percent contingency on every estimate, the dock comes to nine hundred and twenty kilograms, twenty over.
On screen: Allocation 900 on S.0 → Over allocation.
The docking bays are the biggest item. Once a bay has been weighed, its basis is measured, and its contingency drops to three percent. Set the docking bay's basis to Measured.
On screen: Docking Bay → Basis: Measured.
Now the dock is forty-six kilograms under its allocation, a margin of five percent. The project asks for ten, so the status still warns: the design needs either lighter parts or a larger allocation.
On screen: Margin 46 kg (5.11%) → Margin below 10%.
A technical performance measure
A budget is today's number. A technical performance measure, a TPM, tracks one critical number over the life of the project. Create a Measure in the Database: Dock Mass, numbered TPM one, in kilograms.
On screen: Database → New Entity: Measure TPM-1 Dock Mass.
Its threshold is nine hundred kilograms, the limit it must not pass, and its objective is eight hundred, the value the design aims for. For mass, lower is better, so its improvement direction is negative.
On screen: Units, Threshold 900, Objective 800, Improvement Direction.
What makes it a TPM is its label. Under Labels, click plus Label, and choose TPM.
On screen: Labels → + Label → TPM.
Back in Budgets, open the TPMs tab. Dock Mass is listed, with its threshold and objective.
On screen: Budgets → TPMs.
Track it
Enter the current estimate from the budget, eight hundred and fifty-four kilograms. Add a milestone: the preliminary design review on the first of December, planned at eight hundred and eighty. Take a snapshot, and today's estimate joins the history. At every review, the chart shows whether the dock is on track, long before anything is built.
On screen: Current estimate; + Milestone; Take Snapshot.
Recap
Let's recap. You built a mass budget from the parts with counts, bases and contingency, set an allocation and read the margin, and created a TPM with a threshold, an objective, a milestone and a snapshot.
That completes Behavior and Architecture. You can now model functions and their flow, action diagrams, allocation, interfaces, simulation, budgets and TPMs.
On screen: Track complete card, then end card.