فصول الدورة
التدريب · المسار 13. اللوحات البيضاء · الفصل 13.4 من 4
13.4 البيانات الحية وعناصر النموذج والقصاصات الفنية 3:17
الصق الخلايا كجدول حي، واربط مخططًا بيانيًا بخلايا جدول بيانات، واربط الأشكال بعناصر النموذج وحوّلها إليها، وأضف قصاصات فنية.
يعرض Holarch 2.35.
ما ستتعلمه
- الصق خلايا من Excel كجدول بيانات مباشر
- اربط مخططًا بيانيًا بنطاق من جدول بيانات في «تحديد البيانات»
- غيّر قيمة في جدول البيانات وشاهد اللوحة تتبعها
- اربط شكلًا بعنصر في النموذج، وحوّل شكلًا إلى عنصر جديد
- اعثر على القصاصات الفنية وضع عليها نجمة وأدرجها
أكمل اللوحة البيضاء لمفهوم Bike-Share Dock: الصق خلايا حالة المحطة من Excel كجدول بيانات مباشر، واربط مخططًا بيانيًا شريطيًا بالخلايا نفسها باستخدام «تحديد البيانات»، وغيّر رقمًا في جدول البيانات وشاهد الجدول والمخطط البياني يتبعانه، واربط شكلًا بأصل في النموذج وحوّل شكلًا آخر إلى أصل جديد، وأضف صورة من لوحة «القصاصات الفنية».
ملفات المشاريع
- مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
- المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.
التطبيق العملي
نفّذ هذا بنفسك في Holarch، على Bike-Share Dock.
- افتح ملف البداية للفصل واللوحة البيضاء Dock Concept. انقر + في شريط اللوحات.
- في Excel، انسخ كتلة صغيرة من الخلايا بصف عناوين. انقر اللوحة، واضغط ⌘V / Ctrl+V (أو Ctrl+V)، واختر جدول بيانات مباشر ثم انقر لصق.
- أدرج مخططًا بيانيًا من نوع شريط، وافتح تحديد البيانات… ← الربط بنطاق من جدول بيانات…، واختر جدول البيانات الجديد، واكتب النطاق وانقر ربط، ثم موافق.
- انقر نقرًا مزدوجًا على الجدول، وغيّر رقمًا واحدًا في جدول البيانات، وعُد إلى اللوحة من علامة تبويب المحرر الخاصة بها.
- في Board 1، حدد الشكل Rental Kiosk، وانقر ربط بـ… واختر الأصل Rental Kiosk. حدد Rider، وانقر تحويل إلى النموذج…، واختر الأصل ثم انقر تحويل.
- افتح القصاصات الفنية، وابحث عن
bicycle، وضع نجمة على صورة وانقرها لإدراجها.
تكون قد انتهيت عندما يعرض الجدول والمخطط البياني الرقم الذي غيّرته، ويحمل الشكلان شارة فئة، وتكون صورة دراجة على اللوحة.
اختبر نفسك
- ما الفرق بين لصق الخلايا كمخطط بياني وكجدول بيانات مباشر؟
- كيف يتبع مخطط بياني خلايا جدول بيانات؟
- ما الفرق بين «ربط بـ…» و«تحويل إلى النموذج…»؟
إظهار الإجابات
ما الفرق بين لصق الخلايا كمخطط بياني وكجدول بيانات مباشر؟
يحتفظ المخطط البياني بنسخة من القيم ولا يتغير. أما جدول البيانات المباشر فينشئ جدول بيانات بالخلايا ويعرضها كجدول حي يتغير معها.
كيف يتبع مخطط بياني خلايا جدول بيانات؟
اربطه في «تحديد البيانات» باستخدام «الربط بنطاق من جدول بيانات…»؛ فيرسم المخطط البياني بعد ذلك من ذلك النطاق.
ما الفرق بين «ربط بـ…» و«تحويل إلى النموذج…»؟
«ربط بـ…» يربط الشكل بعنصر موجود أصلًا. و«تحويل إلى النموذج…» ينشئ عنصرًا جديدًا من الشكل، مسمّى بنصه، ويربطه.
قراءة المزيد
النص المكتوب
إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)
Introduction
Chapter four: live data, model items and clipart. A board can show figures that stay current, stand for items of the model, and use ready-made pictures.
In this chapter you finish the dock concept board.
Live data from pasted cells
Live data gets a board of its own. Click the plus in the Boards strip.
On screen: Boards strip → +.
The dock status is kept in a workbook: each station's docks, and the bikes available now. In Excel, select the cells and copy them.
On screen: Dock Status.xlsx.
Click the board, and press Command V, or Control V. Holarch asks how to paste the cells. Choose Live spreadsheet, and click Paste.
On screen: Click the board → ⌘V / Ctrl+V → Live spreadsheet → Paste.
Holarch creates a spreadsheet that holds the cells, and shows them on the board as a live table. Drag the table to the left.
On screen: The live table → drag it left.
A chart can follow the same cells. In the Tables and Charts panel, click Bar, and drag the chart beside the table.
On screen: Tables and Charts → Bar → drag it right.
Open Select Data, and click Link to Spreadsheet Range. Choose the new spreadsheet, type A1 to C5 as the range, and click Link.
On screen: Select Data… → Link to Spreadsheet Range… → A1:C5 → Link.
Select Data now names the linked range, and the chart shows the stations' docks and bikes. Click OK.
On screen: Linked range → OK.
The board follows the source
Now change a figure at its source. Double-click the table: its spreadsheet opens, with the cells selected.
On screen: Double-click the table → the spreadsheet.
Two more bikes are back at Riverside. In the Name Box, type C3 and press Enter, then type 6 in the formula bar, and press Enter.
On screen: Name Box C3 → formula bar 6 → Enter.
Go back to the board with its editor tab. The table and the chart already show six bikes at Riverside.
On screen: Editor tab → the board; the new value.
Model items on the board
Shapes on a board can stand for items of the model. Open Board 1, and select the rental kiosk.
On screen: Board 1 → select Rental Kiosk.
In the inspector's Model section, click Link to, search for Rental Kiosk, and choose the asset.
On screen: Link to… → Rental Kiosk (Asset).
The shape shows a badge, and the inspector names the linked asset. Click its name to see the asset's details in the side panel.
On screen: Badge; Model section → the asset.
A shape can also become a new item. Select the rider, and click Convert to Model. Choose Asset as the class, keep the name, and click Convert.
On screen: Rider → Convert to Model… → Asset → Convert.
The rider is now an asset of the model, linked to its shape, and listed in the Database with the other assets.
On screen: The linked Rider.
Clipart
Last, the Clipart panel: thousands of pictures and icons for concept graphics. Open it, and search for bicycle.
On screen: Clipart panel → search bicycle.
The star on a picture adds it to your favorites. Click a picture to add it to the board, and drag it below the rider.
On screen: Star → click the picture → drag it beside the rider.
Recap
To recap: paste cells as a live table, link charts to spreadsheet ranges in Select Data, link or convert shapes in the Model section, and add pictures from the Clipart panel.
That completes the whiteboard track. You can now sketch a concept with shapes and lines, chart its figures, keep them live, and tie the board to the model.
On screen: Track complete card, then end card.