Holarch
فصول الدورة

التدريب · المسار 1. البدء · الفصل 1.2 من 8

1.2 مشروعك الأول 5:43

أنشئ مشروعًا، وتعرّف على الفئات، وأضف العناصر الأولى.

يعرض Holarch 2.41.

→ 1.1 مساحة عمل Holarch · كل الفصول · 1.3 السمات والعلاقات ←

ما ستتعلمه

  • أنشئ مشروعًا باسم ووصف من «إدارة المشاريع»
  • اختر فئة LML المناسبة لاحتياج وقيد ومتطلب ووظيفة وجزء
  • أنشئ عناصر باستخدام «+ عنصر جديد» وأعطها أرقامًا وتسميات
  • عدّل عنصرًا في الجدول وتراجع عن التغيير وأعده

أنشئ مشروع Bike-Share Dock المستخدم في بقية الدورة، وتعرّف على معنى فئة العنصر، وأضف أولى احتياجات أصحاب المصلحة، وقيدًا بتسمية، ومتطلبًا، ووظيفة، والنظام في قاعدة البيانات؛ وعدّل في الجدول وتراجع.

ملفات المشاريع

  • المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)

يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.

التطبيق العملي

نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.

  1. افتح مشروع EO-1 التوضيحي الخاص بك (أو أنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة)).
  2. انقر قاعدة البيانات أسفل الشريط الجانبي، ثم + عنصر جديد. واختر الفئة العبارة، وسمّه Field Boundary Overlays، ورقّمه N4، وصِف الحاجة (يريد المهندسون الزراعيون رسم حدود الحقول على كل خريطة غطاء نباتي) وانقر إنشاء.
  3. أنشئ Statement ثانيًا، Rideshare Mass Limit، بالرقم C1، ينص على ألا تتجاوز المركبة الفضائية حد الكتلة الخاص بالموزّع. وفي لوحة الخصائص، انقر + تسمية واختر القيد.
  4. أنشئ المتطلب باسم Field Boundary Layer، بالرقم 6.6، مكتوبًا بصيغة عبارة shall، وتحقق من أن الحالة هي Draft. ثم أنشئ الإجراء باسم Overlay Field Boundaries، بالرقم F12.
  5. انقر نقرًا مزدوجًا على وصف N4 في الجدول، وغيّر كلمة واضغط Enter. واضغط ⌘Z / Ctrl+Z للتراجع عنها و⇧⌘Z / Ctrl+Shift+Z لإعادتها.
  6. انقر + عامل تصفية واختر الفئة العبارة لترى الاحتياجات والقيود معًا.

تنتهي حين يسرد مرشح Statement العناصر من N1 إلى N4 وC1، ويحمل C1 التسمية Constraint، ويعرض 6.6 Field Boundary Layer الحالة Draft.

اختبر نفسك

  1. لماذا تهم الفئة عند إنشاء عنصر؟
  2. يقول أحد أصحاب المصلحة إن المشغّلين يجب أن يتمكنوا من تخطيط التمريرات من المنزل. هل هذا Statement أم Requirement؟
  3. ما فائدة التسمية، إذا كانت الفئة تبيّن بالفعل ما هو العنصر؟
إظهار الإجابات
  1. لماذا تهم الفئة عند إنشاء عنصر؟

    تحدد الفئة السمات والعلاقات التي يمكن أن تكون للعنصر. ولا يعرض Holarch إلا الروابط المنطقية له: يمكن لأصل أن ينفّذ إجراءً، أما الخطر فلا.

  2. يقول أحد أصحاب المصلحة إن المشغّلين يجب أن يتمكنوا من تخطيط التمريرات من المنزل. هل هذا Statement أم Requirement؟

    Statement: فهو احتياج بكلمات صاحب المصلحة. وتأتي المتطلبات التي تصوغه رسميًا لاحقًا وتُتتبَّع إليه.

  3. ما فائدة التسمية، إذا كانت الفئة تبيّن بالفعل ما هو العنصر؟

    تصنّف التسمية عناصر فئة واحدة إلى أنواع، مثل Statement بالتسمية Constraint، فتستطيع التصفية وإعداد التقارير حسب النوع دون فئة جديدة.

قراءة المزيد

النص المكتوب

إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)

Introduction

Chapter two: your first project. You will create a project for a new system, learn what an item's class means, and add the model's first items.

This is the project the rest of the course builds on, so it is worth following along in your own account.

Create the project

In Manage Projects, click New Project. Name the project after the system. Our example for this course is a bike-share dock: a station on the street that holds, locks, charges and rents out bicycles.

On screen: + New Project → Bike-Share Dock.

Add a short description, so others know what the project covers. The folder is optional: it only groups projects in this list. Then click Create Project.

On screen: Description → Create Project.

The new project opens on Home. It is empty for now, so Next actions has one suggestion: write or import the first requirements.

On screen: Home of the new project.

Classes

Everything in a model is an item, which Holarch also calls an entity. Its class says what kind of thing it is. The classes come from the Lifecycle Modeling Language, L M L, and a few of them cover most of the work.

On screen: Concept card: the main classes.

The class decides which attributes and relationships an item can have. A requirement can be satisfied by an asset, and an asset can perform an action, but a risk cannot perform anything. Holarch only offers the links that make sense.

On screen: Concept card.

Create items

Open the Database at the bottom of the rail. In a new project, the table is empty.

On screen: Database (empty).

Click New Entity in the top bar. Choose the class first. Start with a Statement: a good model begins with what people need, before any requirement.

On screen: + New Entity → Statement.

Name it Find a Bike Nearby, number it N.1, and describe the need in the rider's own words. Then click Create.

On screen: Name, number, description → Create.

The new item is selected, and the inspector on the right shows it. Every field can be changed there later.

On screen: The inspector shows N.1.

Add the operator's need the same way: Return Bikes Without Staff, number N.2.

On screen: + New Entity → Statement N.2.

Constraints are statements too. Create one: the dock must fit on a standard sidewalk.

On screen: + New Entity → Statement C.1.

Labels and numbers

Then click Label in the inspector, and choose Constraint. Labels sort the items of one class into kinds, and you can filter and report by them.

On screen: Inspector → + Label → Constraint.

Now the first requirement. Choose the class Requirement, name it Unlock a Bike, number it 1.1, and write it as a shall statement.

On screen: + New Entity → Requirement 1.1.

New requirements start with the status Draft. As the team reviews them, the status moves to In Review and then Approved; a later chapter shows how.

On screen: Inspector → Attributes → Status.

Functions are Actions: what the system does. Create Rent a Bike, number F.1.

On screen: + New Entity → Action F.1.

Parts are Assets. Create the system itself, Bike-Share Dock, number S.0, and give it the label System.

On screen: + New Entity → Asset S.0, label System.

The other parts, functions and requirements are added the same way: the docking bays, the kiosk, the charging unit and the operator's back office; returning a bike, charging and payment; and two more requirements.

On screen: The rest entered off camera; the table fills.

Edit and undo

You can also edit right in the table. Double-click a number or a description, type, and press Enter.

On screen: Double-click the description of Charge Bikes → edit.

Every change is one undo step. Click Undo in the top bar, or press Command Z, and the old text is back. Redo brings the change back again.

On screen: Undo, then Redo.

To see one kind of item at a time, click Filter and choose a class. Here are the assets of the dock.

On screen: + Filter → Asset.

Recap

Let's recap. You created the Bike-Share Dock project, learned what classes are, and added needs, a constraint, a requirement, a function and the system, with numbers and labels, in the Database.

Next, you describe these items with attributes and connect them with relationships.