Holarch
فصول الدورة

التدريب · المسار 1. البدء · الفصل 1.3 من 8

1.3 السمات والعلاقات 3:29

صِف العناصر واربطها لتكوّن نموذجًا.

يعرض Holarch 2.41.

→ 1.2 مشروعك الأول · كل الفصول · 1.4 مخططك الأول ←

ما ستتعلمه

  • عدّل سمات عنصر، مثل مبرر متطلب، في لوحة الخصائص
  • اربط العناصر بـ «ربط عنصر موجود…» واقرأ كل رابط من طرفيه
  • فكّك أصلًا إلى أجزاء وخصّص وظيفة للجزء الذي يؤديها
  • تتبّع وظيفة إلى المتطلب الذي تحققه
  • تنقّل في النموذج عبر العناصر المرتبطة في عرض العنصر

صِف عناصر Bike-Share Dock بالسمات (الوصف، والمبرر، والحالة) واربطها بالعلاقات: تتبّع متطلبًا إلى الحاجة التي جاء منها، وفكّك النظام إلى أجزائه، وبيّن أي جزء يؤدي أي وظيفة وأي وظيفة تحقق أي متطلب، واقرأ كل رابط من طرفيه في لوحة الخصائص وعرض العنصر.

ملفات المشاريع

  • مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
  • المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)

يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.

التطبيق العملي

نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.

  1. افتح مشروع EO-1 التوضيحي الخاص بك (أو أنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة)).
  2. في قاعدة البيانات، حدّد 2.5 Safe Mode Recovery واكتب المبرر في لوحة الخصائص (لماذا يجب أن تغادر المركبة الفضائية الوضع الآمن من تلقاء نفسها).
  3. حدّد F10 Enter Safe Mode. وفي التتبع، اعثر على satisfies (حدّد إظهار كل العلاقات إن لم يكن مدرجًا)، وانقر + ← ربط عنصر موجود…، وحدّد 2.5 Safe Mode Recovery وانقر ربط المحدد. ثم حدّد 2.5 واعثر على الرابط نفسه تحت satisfied by.
  4. حدّد 1.4 C&DH، وحدّد إظهار كل العلاقات، واربطه بالعلاقة performs بـ OPS.9 Hold Data Onboard، وهي خطوة العمليات الوحيدة التي لا يؤديها أي جزء بعد.
  5. حدّد 2.2 Mission Operations Center. وعند decomposed by، انقر + ← Asset جديد… وأنشئ Image Processing Server.
  6. انقر نقرًا مزدوجًا على F10 Enter Safe Mode لفتح عرض العنصر، ثم انقر الأسماء المرتبطة واحدًا تلو الآخر: من F10 إلى 1.4 C&DH، ومن هناك إلى 1 EO-1 Spacecraft.

تنتهي حين يسرد عرض العنصر لـ 2.5 Safe Mode Recovery العنصر F10 تحت satisfied by، ويسرد OPS.9 العنصر 1.4 C&DH تحت performed by.

اختبر نفسك

  1. تضيف رابطًا من F10 بالعلاقة satisfies. لماذا يعرض 2.5 الآن satisfied by دون أي خطوة إضافية؟
  2. لماذا لا تعرض أداة الاختيار في «ربط عنصر موجود…» كل عنصر في المشروع؟
  3. ماذا يسجّل ربط أصل بالعلاقة performs بإجراء، بمصطلحات هندسة النظم؟
إظهار الإجابات
  1. تضيف رابطًا من F10 بالعلاقة satisfies. لماذا يعرض 2.5 الآن satisfied by دون أي خطوة إضافية؟

    لكل علاقة اسم في كل اتجاه. وهي رابط واحد، يُقرأ satisfies من جهة الوظيفة وsatisfied by من جهة المتطلب.

  2. لماذا لا تعرض أداة الاختيار في «ربط عنصر موجود…» كل عنصر في المشروع؟

    لا تسرد إلا عناصر الفئات التي تسمح بها العلاقة لهذا العنصر، فلا يمكنك إنشاء رابط لا يعرّفه المخطط.

  3. ماذا يسجّل ربط أصل بالعلاقة performs بإجراء، بمصطلحات هندسة النظم؟

    تخصيص وظيفة للجزء المادي الذي ينفذها.

قراءة المزيد

النص المكتوب

إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)

Introduction

Chapter three: attributes and relationships. Attributes describe an item. Relationships connect items, and they are what turn a list of items into a model.

We continue with the Bike-Share Dock project from the last chapter.

Attributes

Open the Database, and select the requirement Unlock a Bike. The inspector's Item section holds its number, name and description. Below it, Attributes holds the attributes of its class, such as a rationale and a status.

On screen: Database → 1.1 Unlock a Bike → Attributes.

A rationale says why the requirement exists, which helps when someone later wants to change it. Type it in, and click elsewhere to save.

On screen: Rationale.

Asset and Action have their own attributes, such as a function's duration, which simulation uses later. A project owner can add attributes to any class in the Schema.

On screen: Attributes of an Action.

Relate items

Now the relationships. Select Unlock a Bike again, and click Trace in the inspector. It groups the relations of this class by purpose. Find traced from, click its plus button, and choose Link existing.

On screen: Trace → traced from → + → Link existing…

The picker lists only items that this relation allows. Check Find a Bike Nearby, the need this requirement answers, and click Link Selected.

On screen: Pick N.1 → Link Selected.

Every relationship has a name in each direction. Select the need, and its Trace shows the same link the other way round: Find a Bike Nearby is traced to Unlock a Bike.

On screen: N.1 → traced to 1.1.

Structure and allocation

Next, the system's structure. Select Bike-Share Dock, find decomposed by, and relate its three parts at once: the docking bay, the kiosk and the charging unit. The back office service is an external system, outside the dock, so it is not one of its parts.

On screen: S.0 → decomposed by → S.1–S.3.

Then say which part does what. Select the kiosk. Performs has no links yet, so tick Show all relations, and relate the kiosk with performs to Rent a Bike and Take Payment. In systems engineering terms, you are allocating functions to the physical parts.

On screen: S.2 Kiosk → Show all relations → performs → F.1, F.4.

The docking bay performs Return a Bike, and the charging unit performs Charge Bikes. They are related the same way.

On screen: S.1, S.3 performs (entered off camera).

Finally, link the function to the requirement it meets. Select Rent a Bike, and relate it with satisfies to Unlock a Bike.

On screen: F.1 → satisfies → 1.1.

Reading the links

Trace shows the relations that have links, plus a few kept visible even when empty. Untick Show all relations, and you see just what this function is connected to.

On screen: Trace → Show all relations off.

Double-click the row to open the Entity View. It shows the same sections on a full page, and linking works here too.

On screen: Entity View of Rent a Bike.

Click a related item's name to move to it. From the function, go to the kiosk that performs it, and from there to the dock it belongs to. This is how you walk the model.

On screen: Entity View: → Kiosk → Bike-Share Dock.

Recap

Let's recap. You edited attributes, related items with Link existing, read each link from both ends, decomposed the system, allocated functions to parts, and walked the links in the Entity View.

Next, you draw part of this model as a diagram.