Holarch
فصول الدورة

التدريب · المسار 3. السلوك والمعمارية · الفصل 3.3 من 6

3.3 التخصيص 2:33

حدّد أي جزء من المحطة يؤدي كل وظيفة، واعثر على ما تبقى.

يعرض Holarch 1.27.

→ 3.2 مخططات الإجراءات · كل الفصول · 3.4 الواجهات ←

ما ستتعلمه

  • أعدّ مصفوفة تتبع للإجراءات مقابل الأصول بالعلاقة performed by
  • خصّص وظيفة للأصل الذي يؤديها بنقرة واحدة في المصفوفة
  • استخدم «الفجوات فقط» للعثور على الإجراءات التي لا يؤديها أي أصل
  • تأكد من التخصيص في قسم التتبع في العنصر

خصّص وظائف Bike-Share Dock وخطوات Rent a Bike للأجزاء التي تؤديها، في مصفوفة للإجراءات مقابل الأصول بالعلاقة performed by، ثم استخدم «الفجوات فقط» لسرد ما لا يزال بلا مؤدٍّ.

ملفات المشاريع

  • مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
  • المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)

يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.

التطبيق العملي

نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.

  1. افتح مشروع EO-1 التوضيحي الخاص بك، أو أنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة).
  2. افتح التحقق ← مصفوفة التتبع. انقر شريحة الصفوف، واضبط الصفوف من على التسلسل الهرمي تحت كيان جذر واختر OPS Run Nominal Imaging Pass جذرًا، ثم انقر تم.
  3. انقر شريحة الأعمدة، واضبط الأعمدة من على كل كيانات فئة مع الفئة الأصل، واضبط العلاقة على performed by.
  4. حدّد الفجوات فقط. يبقى OPS.9 Hold Data Onboard، مع الجذر OPS، الذي يؤديه النظام ككل.
  5. انقر الخلية التي يلتقي فيها OPS.9 Hold Data Onboard مع 1.4 C&DH، الجزء الذي يحفظ بيانات الحمولة في التخزين. ثم حدّد OPS.9 في قاعدة البيانات واقرأ performed by في قسم التتبع الخاص به.
  6. لجولة مفحوصة خطوة بخطوة، شغّل البرنامج التعليمي 6 Physical Architecture and Allocation (التعليمات ← البرامج التعليمية).

تنتهي حين لا يعود «الفجوات فقط» يسرد OPS.9 ويعرض قسم التتبع الخاص به performed by 1.4 C&DH.

اختبر نفسك

  1. لماذا تضبط «العلاقة» على performed by بدلًا من «كل المسموح بها»؟
  2. أين يُحفظ التخصيص؟
  3. يعرض «الفجوات فقط» صفًا. هل هذا خطأ دائمًا؟
إظهار الإجابات
  1. لماذا تضبط «العلاقة» على performed by بدلًا من «كل المسموح بها»؟

    مع اختيار نوع واحد، تنشئ النقرة على خلية فارغة تلك العلاقة بالضبط. ومع كل الأنواع المسموح بها، يضطر Holarch إلى السؤال عن النوع الذي تقصده حين ينطبق أكثر من نوع.

  2. أين يُحفظ التخصيص؟

    على العناصر، بوصفها performed by على Action وperforms على Asset. والمصفوفة ليست سوى طريقة عرض لتلك الروابط، لذا تعرض أي طريقة عرض أخرى، مثل قسم التتبع في العنصر، التخصيص نفسه.

  3. يعرض «الفجوات فقط» صفًا. هل هذا خطأ دائمًا؟

    لا. قد يؤدي النظام ككل عملية أو وظيفة من المستوى الأعلى، فلا تحتاج إلى مؤدٍّ واحد. أما كل خطوة متبقية فتحتاج عادةً إلى مؤدٍّ.

قراءة المزيد

النص المكتوب

إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)

Introduction

Welcome back. Functions say what the dock does. Its parts, the assets, say what it is. Allocation joins the two.

In this chapter you allocate every function to the part that performs it.

What allocation is

Each function should be performed by a part of the system. A function nothing performs will not happen, and a part with no function is weight with no job. In the model, allocation is one relationship: performed by.

On screen: Card: allocation.

Set up the matrix

A matrix is the quickest way to allocate many functions at once. Open Verification, then Traceability Matrix.

On screen: Verification → Traceability Matrix.

Click Rows, and choose all entities of the class Action. Set Columns to the class Asset the same way. Then set the relationship to performed by, so a click on a cell creates exactly that.

On screen: Rows → class Action; Columns → class Asset; Relationship: performed by.

Allocate the functions

The top-level functions first. Three were allocated in Getting Started, and the matrix marks them: Rent a Bike by the Rental Kiosk, Return a Bike by the Docking Bay, and Charge Bikes by the Charging Unit.

On screen: Existing marks: F.1, F.2, F.3.

Allocate the other two. Take Payment is performed by the Back Office Service: click the cell where its row and that column meet. Report Dock Status is performed by the kiosk, which talks to the back office.

On screen: F.4 × S.4, F.5 × S.2.

The steps of Rent a Bike from the last chapter need performers too. Identify Rider happens at the kiosk, Check Account in the back office, and Unlock Bay in the docking bay.

On screen: F.1.1 × S.2, F.1.2 × S.4, F.1.3 × S.1.

Find the gaps

Now turn on Gaps only. The matrix keeps only the rows and columns with no link: the steps still to allocate, and the top-level function, which is done by the dock as a whole.

On screen: Gaps only.

The rest follow the same way. Show Bay Number and Start Rental belong to the kiosk and the back office, and Relock Bay to the docking bay.

On screen: F.1.4 × S.2, F.1.6 × S.4, F.1.7 × S.1.

On the item

Allocation is stored on the items, not in the matrix. Select Rent a Bike in the Database, and open its Trace section: performed by lists the Rental Kiosk.

On screen: Database → F.1 → Trace.

Recap

Let's recap. You set up a matrix of actions against assets with performed by, allocated the functions and the steps with one click each, and used Gaps only to find what was left.

Next, you define how the dock's parts connect: interfaces.