فصول الدورة
التدريب · المسار 7. اتباع عملية · الفصل 7.4 من 4
7.4 إجراء مراجعة فنية من النموذج 2:38
افحص معايير الدخول إلى مراجعة وجهّز حزمتها.
يعرض Holarch 2.13.
ما ستتعلمه
- اعثر على مراجعة مسمّاة واقرأ معايير الدخول إليها في دورة حياة رسمية
- استوفِ معيار دخول من رابط «فتح» الخاص به
- أضف معلم مراجعة وحزمة مراجعتها
- اشرح ما يعرضه الدليل وما يقرره مجلس المراجعة
جهّز مراجعة متطلبات النظام (SRR) بدليل دورة حياة مشروع NASA: نقاط القرار الرئيسية، ومراجعات المرحلة ومعايير الدخول إليها مقروءة من النموذج، وفحص الجودة المشغَّل من رابط «فتح» في معيار، وخطة إدارة هندسة النظم المنشأة من قالب، ومعلم المراجعة وحزمتها.
ملفات المشاريع
- مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
- المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.
التطبيق العملي
نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.
- افتح مشروع EO-1 التوضيحي الخاص بك (إن لم يكن لديك واحد، فأنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة)). وافتح التخطيط ← عملية هندسة النظم واختر دورة حياة مشروع NASA في العملية (أو حدّدها وانقر استخدام هذه العملية).
- انقر المرحلة B: التصميم الأولي واستكمال التقنية واقرأ معايير الدخول إلى PDR: التخصيص للمكونات، والواجهات، وTPMs، وإجراءات التخفيف، وطرق التحقق.
- انقر فتح بجانب معيار غير مستوفى وأنجز جزءًا من العمل، مثل ضبط طريقة التحقق لـ 2.5 Safe Mode Recovery.
- عد إلى عملية هندسة النظم وتحقق من عدد المعيار.
- تحت PDR، انقر إضافة معلم بوابة وإنشاء حزمة مراجعة، وافتح الحزمة لترى المستندات التي جمعتها.
تنتهي حين تعرض PDR معلمها وحزمة مراجعتها، ويعدّ المعيار الذي عملت عليه عنصرًا إضافيًا.
اختبر نفسك
- استوفيت كل معايير الدخول إلى المراجعة. هل التصميم جاهز؟
- لماذا تقرأ معايير الدخول قبل المراجعة لا أثناءها؟
- لا يزال معيار SRR الخاص بتتبع التوقعات إلى المتطلبات مفتوحًا. ماذا يطلب؟
إظهار الإجابات
استوفيت كل معايير الدخول إلى المراجعة. هل التصميم جاهز؟
ليس بالضرورة. يعرض الدليل ما يحمله النموذج؛ أما جودة التصميم فقرار يعود إلى مجلس المراجعة.
لماذا تقرأ معايير الدخول قبل المراجعة لا أثناءها؟
يقرؤها Holarch من النموذج، فيرى الفريق ما ينقص ما دام هناك وقت لإنجاز العمل.
لا يزال معيار SRR الخاص بتتبع التوقعات إلى المتطلبات مفتوحًا. ماذا يطلب؟
روابط من الاحتياجات (Statement) إلى المتطلبات التي تلبيها، تُنشأ بالعلاقة traced to. وهي عمل نمذجة، لا مربع يُحدَّد.
قراءة المزيد
النص المكتوب
إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)
Introduction
Chapter four: running a technical review from the model. Formal life cycles name their reviews, and each review has entry criteria. Holarch reads the criteria from the model, so the team sees before the review what is ready.
We prepare the System Requirements Review of the Bike-Share Dock, using the NASA project life cycle.
Reviews and entry criteria
Open SE Process, and choose NASA project life cycle in the Process list. The phases run from Pre-Phase A, concept studies, to Phase F, closeout. The diamond on each phase names the key decision point that ends it.
On screen: SE Process → Process ▾ → NASA project life cycle.
Click Phase A, concept and technology development. Its reviews are at the bottom: the System Requirements Review, and the Mission or System Definition Review. Each lists its entry criteria.
On screen: Phase A → Reviews and gates.
Read the SRR's criteria. The system requirements are defined. The requirements have not been quality-checked yet, and there is no systems engineering management plan.
On screen: SRR entry criteria.
Meeting the criteria
Click Open next to the quality criterion. On the Quality page, click the run button to check every requirement. Each one gets a score, and the findings explain what to improve.
On screen: Open → Quality → run the check.
Now the management plan. Go back to SE Process, and click Open next to it. Create a new document of the type Systems Engineering Management Plan Document, from its outline.
On screen: SE Process → Open → + New Document: SEMP.
Back on SE Process, both criteria are met. The one still open, expectations traced to requirements, is real work for the team: it asks for links between the needs and the requirements that answer them.
On screen: SE Process → Phase A: criteria met; tracing still open.
Milestone and package
Click Add Gate Milestone and Create Review Package under the SRR. The package collects the requirements specification and the new management plan for the review board.
On screen: SRR: Add Gate Milestone, Create Review Package.
The guide shows what the model holds. It does not judge whether a design is good: that is the review board's decision. When the review has passed, make the phase current and move on.
On screen: Make Current Phase.
Recap
Let's recap. You switched to the NASA life cycle, read a review's entry criteria, met two of them from their Open links, added the review's milestone and package, and moved the project on.
That completes Track 7. More tracks are at holarch.app slash training.