فصول الدورة
التدريب · المسار 13. اللوحات البيضاء · الفصل 13.1 من 4
13.1 الأشكال والخطوط 3:15
أنشئ لوحة بيضاء، وارسم أشكالًا، واكتب داخلها، واربطها بخطوط وأسهم.
يعرض Holarch 2.35.
ما ستتعلمه
- أنشئ لوحة بيضاء في مشروع
- ارسم الأشكال بأدوات شريط الأدوات والمفاتيح ولوحة «الأشكال»
- اكتب نصًا داخل شكل وأضف نسخًا متصلة بمقابض الزائد
- اربط الأشكال بأسهم وخطوط بزاوية قائمة تختارها في شريط خيارات الخط
ابدأ لوحة مفهوم لـ Bike-Share Dock: أنشئ لوحة بيضاء، وارسم أشكالًا بأدوات شريط الأدوات ولوحة «الأشكال»، واكتب نصًا داخلها، وأضف نسخًا متصلة بمقابض الزائد، واربط الأشكال بأسهم وخطوط بزاوية قائمة تختار نوعها ورؤوس أسهمها ونمطها في شريط خيارات الخط قبل الرسم.
ملفات المشاريع
- مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
- المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.
التطبيق العملي
نفّذ هذا بنفسك في Holarch، على Bike-Share Dock.
- افتح ملف البداية للفصل، أو أي مشروع خاص بك، وافتح الخطة ← اللوحات البيضاء. انقر + لوحة بيضاء جديدة وسمّها
Dock Concept. - انقر أداة المستطيل واسحب مربعًا. اضغط إدخال، واكتب
Rental Kioskواضغط Esc. - والمربع محدد، انقر مقبض الزائد أسفله واكتب
Docking Bay. - في لوحة الأشكال، ابحث عن
cloud، وانقره، واسحبه إلى اليمين واكتبBack Office. اضغط O، وارسم شكلًا بيضاويًا على اليسار واكتبRider. - اضغط Esc، ثم A. اسحب من الكشك إلى المكتب الخلفي. اضغط A مرة أخرى، واختر زاوية قائمة في شريط خيارات الخط وارسم من حجرة الإرساء إلى المكتب الخلفي.
- حرّك المكتب الخلفي وشاهد الخطين يتبعانه.
تكون قد انتهيت عندما تحتوي اللوحة على أربعة أشكال مسمّاة، وسهم، وخط بزاوية قائمة، ويبقى الخطان متصلين عند تحريك شكل.
اختبر نفسك
- لماذا تضغط Esc قبل مفتاح أداة مثل A أو O؟
- أين تختار نوع الخط ورؤوس الأسهم قبل رسمه؟
- ماذا يحدث عندما تُفلت طرف خط على جسم شكل بدلًا من نقطة اتصال؟
إظهار الإجابات
لماذا تضغط Esc قبل مفتاح أداة مثل A أو O؟
عندما يكون شكل محددًا، تُكتب الحروف داخله. ويمسح Esc التحديد، فيختار المفتاح الأداة.
أين تختار نوع الخط ورؤوس الأسهم قبل رسمه؟
في شريط خيارات الخط، الذي يُفتح فوق اللوحة عندما تختار أداة خط أو سهم.
ماذا يحدث عندما تُفلت طرف خط على جسم شكل بدلًا من نقطة اتصال؟
يبقى الطرف عائمًا: يتصل بأقرب جانب ويتحرك حول الشكل مع تحرك الأشكال.
قراءة المزيد
النص المكتوب
إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)
Introduction
Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.
In this chapter you create the board, draw and label shapes, and connect them with lines.
A new whiteboard
Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.
On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.
The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.
On screen: The editor: toolbar, Shapes panel, board, inspector.
Shapes and text
Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.
On screen: Rectangle tool → drag on the board.
To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.
On screen: Enter → Rental Kiosk → Esc.
Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.
On screen: Plus handle below → Docking Bay.
The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.
On screen: Shapes panel → search: cloud → Cloud.
Drag the cloud to the right of the kiosk, and type Back Office.
On screen: Drag the cloud right → Back Office.
Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.
On screen: O → drag → Rider.
Lines and arrows
Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.
On screen: A → the Line options bar.
Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.
On screen: Drag Rental Kiosk → Back Office.
An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.
On screen: Drag Back Office down.
For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.
On screen: A → Elbow → drag Docking Bay → Back Office.
Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.
On screen: Line section in the inspector.
Recap
To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.
In the next chapter, you shape a curved line and place labels on it.