فصول الدورة
التدريب · المسار 2. المتطلبات والتحقق · الفصل 2.6 من 6
2.6 RVTM وVCRM 2:29
اقرأ تغطية التحقق في RVTM، وضع VCRM حيًا في المواصفة وفي Word.
يعرض Holarch 1.27.
ما ستتعلمه
- اقرأ تغطية التحقق من بطاقات RVTM وصفِّ إلى حالة واحدة
- اشرح الفرق بين RVTM وVCRM
- صدّر RVTM إلى Excel
- أدرج مصفوفة تحقق حية في مواصفة وصدّر مصفوفة إلى Word
أعدّ تقرير التحقق لـ Bike-Share Dock: صفحة RVTM ببطاقات التغطية وعامل التصفية، وتصدير Excel، وVCRM حي مُدرج في قسم التحقق في المواصفة، والمصفوفة نفسها مصدَّرة إلى Word.
ملفات المشاريع
- مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
- المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.
التطبيق العملي
نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.
- افتح مشروع EO-1 التوضيحي الخاص بك (أو أنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة)).
- افتح التحقق ← RVTM. انقر بطاقة أخفق ولاحظ المتطلبات التي يتحقق منها الاختباران المخفقان TC-04 وTC-09. انقر الشريحة لمسح عامل التصفية.
- بدّل الجدول إلى VCRM واعثر على المتطلبات التي لا X لها في أي عمود طريقة.
- انقر تصدير ▾ ← Excel (.xlsx) وافتح الملف.
- افتح EO-1 System Requirements Specification، وحدد القسم 5 Communications واختر كتابة ▾ ← إدراج ▸ ← مصفوفة…. اختر VCRM حسب مستوى التحقق، وأبقِ النطاق على هذا المستند، ثم انقر إدراج.
- اختر تسليم ▾ ← مصفوفة التتبع…، واختر RVTM، واختر مصفوفة (Word) تحت تصدير بتنسيق، واضبط النموذج على SRR Baseline، ثم انقر تصدير.
تكون قد انتهيت عندما تعرض المواصفة VCRM حيًا حسب المستوى ويكون لديك RVTM بصيغة Word يذكر عنوانه SRR Baseline.
اختبر نفسك
- أي مصفوفة تجيب عن كيفية التحقق من كل متطلب، وأيها تجيب عمّا إذا كان قد تُحقق منه؟
- لماذا تُدرج المصفوفة كمحتوى حي بدلًا من لصق جدول في المواصفة؟
- لماذا تصدّر مصفوفة من خط أساس لمُخرَج موقَّع؟
إظهار الإجابات
أي مصفوفة تجيب عن كيفية التحقق من كل متطلب، وأيها تجيب عمّا إذا كان قد تُحقق منه؟
يعرض VCRM الطرق المخططة لكل متطلب. ويعرض RVTM الطرق والاختبارات التي تتحقق من كل متطلب ونتائجها.
لماذا تُدرج المصفوفة كمحتوى حي بدلًا من لصق جدول في المواصفة؟
تُبنى المصفوفة الحية من النموذج. وعندما تتغير طريقة أو ينجح اختبار، تتغير المصفوفة وكل تصدير للمستند معها.
لماذا تصدّر مصفوفة من خط أساس لمُخرَج موقَّع؟
يجب أن يُظهر المستند الموقَّع النموذج كما اتُّفق عليه، لا كما هو اليوم. والمصفوفة المأخوذة من خط أساس تستخدم عناصر ذلك الخط وعلاقاته.
قراءة المزيد
النص المكتوب
إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)
Introduction
Chapter six: the RVTM and the VCRM. These two matrices answer the question every review asks: how will each requirement be verified, and has it been?
This is the last chapter of Requirements and Verification.
The matrices
The RVTM lists each requirement with its method, its level, the tests that verify it and their result. The VCRM is a cross-reference: a column per method, with a mark where that method is planned. Both are built from the model, so they are always current.
On screen: Card: RVTM and VCRM.
The RVTM page
Open Verification, then RVTM. The cards count the requirements by status: one verified, one with a method planned but no test yet, and seven with nothing planned.
On screen: Verification → RVTM.
Click Unverified to list only those seven. They are the work still to plan: each needs a method, and a test or another way to show it is met.
On screen: Unverified card.
Export sends the matrix to Excel, with gaps shaded red, for anyone outside the model.
On screen: Export ▾ → Excel (.xlsx).
A live VCRM in the specification
A specification usually carries its own verification matrix. Open the specification, and select section 11.1, Verification Matrix. Open Write, then Insert, and choose Matrix.
On screen: SRS → 11.1 → Write ▾ → Insert → Matrix…
Choose the Verification Cross-Reference Matrix, keep the scope on this document, and check the preview. Click Insert.
On screen: VCRM → Insert.
The matrix is now part of the section. It is live: when a test passes or a method changes, the matrix in the specification changes with it, and so does every export.
On screen: The VCRM in the document.
Export
To send it on its own, open Deliver, choose Traceability Matrix, pick the VCRM and Word, and click Export. In Word the method columns are narrow, with a legend, and gaps are shaded.
On screen: Deliver ▾ → Traceability Matrix… → VCRM, Matrix (Word) → Export.
Recap
Let's recap. You read verification coverage on the RVTM page, filtered the unverified requirements, exported to Excel, put a live VCRM in the specification, and exported it to Word.
That completes Requirements and Verification. You can now write and check requirements, trace them, take them through review and change, verify them, and report coverage.
On screen: Track complete card, then end card.