Holarch
فصول الدورة

التدريب · المسار 1. البدء · الفصل 1.1 من 8

1.1 مساحة عمل Holarch 5:34

تعرّف على طريقك في نموذج مكتمل.

يعرض Holarch 2.21.

كل الفصول · 1.2 مشروعك الأول ←

ما ستتعلمه

  • أنشئ مشروع CubeSat EO-1 التوضيحي من «إدارة المشاريع»
  • تنقّل بين مجموعات دورة الحياة في الشريط الجانبي وافتح صفحة من نظرة عامة لمجموعة
  • افحص سمات عنصر وتتبعه في لوحة الخصائص وقاعدة البيانات و«عرض العنصر»
  • اعثر على عنصر أو صفحة أو أمر بالاسم باستخدام ⌘K / Ctrl+K
  • افتح التعليمات الخاصة بالصفحة الحالية وقائمة «يحتاج إلى انتباه»

جولة في مساحة عمل Holarch على مشروع CubeSat EO-1 التوضيحي: إدارة المشاريع، والرئيسية، والشريط الجانبي ومجموعات دورة الحياة فيه، وصفحات النظرة العامة، والمستندات ولوحة الخصائص، وقاعدة البيانات، و«عرض العنصر» وعلامات تبويب المحرر، والبحث باستخدام Command K، وقائمة المشكلات، والحفظ والتراجع، والتعليمات في كل صفحة.

ملفات المشاريع

يستخدم هذا الفصل المشروع التوضيحي: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة).

يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.

التطبيق العملي

نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.

  1. أنشئ العرض التوضيحي EO-1: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة).
  2. في الرئيسية، اقرأ بطاقات يحتاج إلى انتباه، ثم انقر التحقق في الشريط الجانبي وافتح مركز الاختبار من صفحة النظرة العامة.
  3. انقر قاعدة البيانات أسفل الشريط الجانبي، وانقر + عامل تصفية واختر الفئة Test Case. وحدّد TC-04 Pointing Accuracy Test واقرأ التتبع الخاص به في لوحة الخصائص: أي متطلب يتحقق منه.
  4. انقر نقرًا مزدوجًا على صف TC-04 لفتحه في عرض العنصر، ثم اضغط ⌘K / Ctrl+K، واكتب battery واضغط Enter على 1.3.2 Battery Pack. وبدّل بين علامتي تبويب المحرر.
  5. انقر علامة «يحتاج إلى انتباه» في الشريط العلوي وافتح إدخال الاختبارات الفاشلة. وفي تلك الصفحة، انقر ? في الشريط العلوي واقرأ لوحة التعليمات.
  6. لجولة مفحوصة خطوة بخطوة، شغّل البرنامج التعليمي 1 Getting Around (التعليمات ← البرامج التعليمية).

تنتهي حين يكون TC-04 و1.3.2 Battery Pack مفتوحين في علامتي تبويب خاصتين بهما في المحرر، وتستطيع تسمية المتطلب الذي يتحقق منه TC-04.

اختبر نفسك

  1. تغيّر وصف متطلب في قاعدة البيانات. هل لا تزال مواصفة متطلبات النظام تعرض النص القديم؟
  2. متى تستخدم ⌘K / Ctrl+K بدلًا من الشريط الجانبي؟
  3. لماذا لا يوجد زر حفظ؟
إظهار الإجابات
  1. تغيّر وصف متطلب في قاعدة البيانات. هل لا تزال مواصفة متطلبات النظام تعرض النص القديم؟

    لا. توجد نسخة واحدة من كل عنصر؛ فالمستند وقاعدة البيانات والمخططات ولوحة الخصائص تعرض كلها العنصر نفسه، لذا يظهر التعديل في كل مكان.

  2. متى تستخدم ⌘K / Ctrl+K بدلًا من الشريط الجانبي؟

    عندما تعرف اسم ما تريده أو رقمه. يعثر ⌘K / Ctrl+K على العناصر والصفحات والمستندات والمخططات والأوامر بالاسم؛ أما الشريط الجانبي فللتصفح حسب مرحلة دورة الحياة.

  3. لماذا لا يوجد زر حفظ؟

    يحفظ Holarch كل تغيير فور إجرائه ويعرض حالة الحفظ في الشريط العلوي. كل تغيير خطوة تراجع واحدة، لذا يلغيه ⌘Z / Ctrl+Z.

قراءة المزيد

النص المكتوب

إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)

Introduction

Welcome to Holarch Training. This first chapter is a tour of the workspace: where things are, how to move around, and how to read what each part of the window tells you. All you need is a browser.

By the end of it, you will know the parts of the window that every later chapter uses: the rail, the top bar, the editor tabs, the inspector, and the Help.

Manage Projects and the demo

After you sign in, Holarch opens Manage Projects. It lists the projects you own and the projects others have shared with you. A project holds one model of one system: its requirements, functions, parts, tests and documents.

On screen: Manage Projects.

To learn the workspace, start with the demo project. Click Project Files, then New Demo Project, and choose the CubeSat. Holarch builds a complete model of a small earth observation satellite, the CubeSat EO-1.

On screen: Project Files ▾ → New Demo Project ▸ CubeSat.

Home

The project opens on its Home page. Needs attention, at the top, counts the open problems: links to review, overdue to-be-determined items, failing tests, measures over their limits, high risks and model check findings.

On screen: Home: Needs attention.

Below it, the Lifecycle cards give the main number of each stage, such as how many requirements are approved and how many are verified. Next actions lists the most urgent work.

On screen: Home: Lifecycle, Next actions.

The rail and overview pages

On the left is the rail. Its groups follow the systems engineering lifecycle from top to bottom: needs and requirements, behavior, architecture, interfaces, verification, risk and decisions, and plan and deliver.

On screen: The rail's lifecycle groups.

Below the groups are the tools that work across the whole project: the Database, Diagrams, the Trash, Settings with the project's Schema, Help, and Manage Projects to switch projects.

On screen: The rail tools.

Click a group to open its overview page. Needs and Requirements shows live numbers for the stage, a card for each of its pages, and its recent diagrams. The group's pages also appear under it in the rail.

On screen: Needs & Requirements overview.

Documents and the inspector

Click Documents, and open the system requirements specification.

On screen: Documents → the SRS.

The document opens in an editor tab under the top bar. The outline on the left lists its sections, and the full text is in the middle, numbered and nested.

On screen: The document editor and its outline.

Click a requirement's number in the text. The inspector on the right shows the selected item in one panel: the item itself, its attributes, its trace to the rest of the model, its discussion and its details.

On screen: Select 3.1 Orbit Average Power; the inspector.

Click Trace at the top of the inspector. This requirement is satisfied by part of the power system and has a test case that verifies it. These links are what make the model more than a document.

On screen: Inspector → Trace.

The Database and the Item View

Now click Database at the bottom of the rail. It lists every item of the model in one table, whichever page it was created on.

On screen: Database.

Filters narrow the table. Click Filter, and choose the class Requirement. The table shows only requirements: the same ones you just saw in the document.

On screen: + Filter → Class → Requirement.

Select a row, and the same inspector opens. There is only one copy of each requirement, so an edit here also changes the document.

On screen: Select a row; the inspector.

Double-click a row to open the item in the Item View. It shows everything about one item on one page: its attributes, relationships, comments and history.

On screen: Double-click → Item View.

Each document, diagram or item you open gets an editor tab. Tabs stay open while you work, and after a reload. Click the document's tab to go back to it.

On screen: Editor tabs → back to the SRS.

Search, problems and Help

To jump to anything by name, press Command K, or click Search in the top bar. Type deploy.

On screen: Search → deploy.

Results include pages, items, documents and diagrams. Press Enter to open the function Deploy Solar Arrays in the Item View, in another tab.

On screen: Enter → Deploy Solar Arrays.

The warning icon in the top bar counts the open problems. Click it for the list. Each entry opens the page that holds the data, so you can fix it there.

On screen: Problems list.

Holarch saves every change as you make it, and the top bar shows the save status. There is no Save button. Every change is one undo step, with Command Z or the Undo button.

On screen: Save status, Undo and Redo.

Your account menu is at the top right. It holds your account settings, preferences, AI settings, Send Feedback, and Sign Out.

On screen: Account menu.

When you are not sure what a page does, click the question mark in the top bar. It opens the Help for the page you are on in a side panel, with steps and examples.

On screen: ? → Help side panel.

Help in the rail opens the Help Center, the keyboard shortcuts, a primer on the modeling language, and guided tutorials. The Help Center also holds the videos, including this course.

On screen: Help in the rail.

Recap

Let's recap. You opened the demo project, moved through the lifecycle with the rail, read items in the inspector, used the Database and the Item View, searched with Command K, and found Help for every page.

In the next chapter, you create your own project and its first items. See you there.