Rozdziały kursu
Szkolenia · Ścieżka 3. Zachowanie i architektura · Rozdział 3.6 z 6
3.6 Budżety i TPM 3:31
Zsumuj masę stacji z rezerwą i marginesem, a następnie śledź ją jako techniczną miarę wydajności.
Pokazuje Holarch 2.13.
Czego się nauczysz
- Konfigurowanie budżetu dla zasobu głównego z wielkością, jednostką i wymaganym marginesem
- Wprowadzanie wartości z podstawą i odczytywanie, jak zmieniają się rezerwa i margines
- Ustawianie przydziału i odczytywanie stanu marginesu pozycji
- Tworzenie TPM z progiem, celem, kamieniem milowym i migawką
Zbuduj budżet masy stacji Bike-Share Dock z jej części, z liczbami sztuk, podstawami i rezerwą, ustaw przydział i odczytaj margines, a następnie utwórz techniczną miarę wydajności dla masy stacji z progiem, celem, planowanym kamieniem milowym i migawką.
Pliki projektu
- Projekt początkowy (.holarch.json; Zarządzaj projektami → Pliki projektu ▾ → Importuj projekt (.json)…)
- Projekt ukończony (.holarch.json; Zarządzaj projektami → Pliki projektu ▾ → Importuj projekt (.json)…)
Film jest odtwarzany z holarch.app; zobacz Politykę prywatności.
Ćwiczenie
Wykonaj to samodzielnie w Holarch, w projekcie demonstracyjnym CubeSat EO-1.
- Otwórz swój projekt demonstracyjny EO-1 lub go utwórz: Zarządzaj projektami → Pliki projektu ▾ → Nowy projekt demonstracyjny → CubeSat (inżynieria systemów z przewodnikiem).
- Otwórz Architektura → Budżety i TPM. Na karcie Budżet pozostaw 1 EO-1 Spacecraft jako element główny i zmień Wielkość na Power Draw.
- Znajdź 1.1 Payload Camera (6,2 W, Szacowana) i zmień jej Podstawę na Zmierzona. Odczytaj, jak zmieniają się jej rezerwa i margines statku kosmicznego.
- W Bazie danych utwórz Measure za pomocą + Nowy element:
ADCS Mass, numerTPM-4. Ustaw Jednostkikg, Threshold Value1.35 kg, Objective Value1.2 kgi Improvement Direction Negative, dodaj etykietę TPM i powiąż ją z 1.2 ADCS relacją specified by. - Na karcie TPM zaznacz TPM-4 ADCS Mass. Wpisz masę ADCS z karty Budżet (Wielkość Mass, CBE + rezerwa) jako Bieżące oszacowanie, kliknij + Kamień milowy, aby dodać
CDRz wartością planowaną1.3 kg, a następnie kliknij Utwórz migawkę.
Gotowe, gdy TPM-4 ADCS Mass jest wymieniona ze statusem, kamieniem milowym CDR w planowanym profilu i punktem Migawka w historii oszacowań.
Sprawdź się
- Dlaczego rezerwa zależy od podstawy wartości?
- Jak oblicza się margines i kiedy pozycja ostrzega?
- Co TPM dodaje do budżetu?
- Co sprawia, że Measure jest w Holarch miarą TPM?
Pokaż odpowiedzi
Dlaczego rezerwa zależy od podstawy wartości?
Szacunek jest mniej pewny niż obliczenie, a obliczenie mniej pewne niż pomiar. Rezerwa zależna od podstawy (w demo 15, 10 i 3%) daje większy zapas tam, gdzie liczba jest mniej pewna.
Jak oblicza się margines i kiedy pozycja ostrzega?
Margines to przydział minus bieżące najlepsze oszacowanie powiększone o rezerwę. Pozycja pokazuje ▲ Niski, gdy margines jest niższy od wymaganego, i ✕ Przekroczenie, gdy przekracza swój przydział.
Co TPM dodaje do budżetu?
Budżet pokazuje dzisiejsze zestawienie. TPM śledzi jedną krytyczną liczbę przez cały cykl życia projektu względem planowanego profilu, progu i celu, więc tendencja zmierzająca do przekroczenia jest widoczna przed przeglądami.
Co sprawia, że Measure jest w Holarch miarą TPM?
Etykieta TPM. Miary Measure z tą etykietą są wymienione na karcie TPM wraz z wymaganiami, które mają Threshold Value.
Więcej informacji
Transkrypcja
Pokaż transkrypcję (narracja i to, co widać na ekranie)
Introduction
Welcome back. A design is only as good as its margins. This last chapter of the track puts numbers on the dock's mass.
You will build a mass budget, and a technical performance measure that tracks it over time.
The budget
Open Architecture, then Budgets. Choose the root asset: the Bike-Share Dock. The quantity is mass, in kilograms. Every part under the dock gets a row.
On screen: Architecture → Budgets → root S.0; unit kg.
Enter each part's mass in the unit value column. A docking bay weighs fifty-five kilograms, and the dock has ten of them, so set its count to ten.
On screen: Docking Bay: 55, count 10.
The kiosk is a hundred and forty kilograms, the charging unit eighty, and the power supply thirty. The dock's row shows the sum of its parts.
On screen: Kiosk 140, Charging Unit 80, Power Supply 30.
Contingency and margin
Each value has a basis: estimated, calculated or measured. Contingency follows the basis, so a guess carries more than a part that has been weighed. Here every value is still an estimate.
On screen: Basis and contingency columns.
Set the allocation on the dock: nine hundred kilograms, the most the installation site can carry. The status says over: with fifteen percent contingency on every estimate, the dock comes to nine hundred and twenty kilograms, twenty over.
On screen: Allocation 900 on S.0 → Over allocation.
The docking bays are the biggest item. Once a bay has been weighed, its basis is measured, and its contingency drops to three percent. Set the docking bay's basis to Measured.
On screen: Docking Bay → Basis: Measured.
Now the dock is forty-six kilograms under its allocation, a margin of five percent. The project asks for ten, so the status still warns: the design needs either lighter parts or a larger allocation.
On screen: Margin 46 kg (5.11%) → Margin below 10%.
A technical performance measure
A budget is today's number. A technical performance measure, a TPM, tracks one critical number over the life of the project. Create a Measure in the Database: Dock Mass, numbered TPM one, in kilograms.
On screen: Database → New Entity: Measure TPM-1 Dock Mass.
Its threshold is nine hundred kilograms, the limit it must not pass, and its objective is eight hundred, the value the design aims for. For mass, lower is better, so its improvement direction is negative.
On screen: Units, Threshold 900, Objective 800, Improvement Direction.
What makes it a TPM is its label. Under Labels, click plus Label, and choose TPM.
On screen: Labels → + Label → TPM.
Back in Budgets, open the TPMs tab. Dock Mass is listed, with its threshold and objective.
On screen: Budgets → TPMs.
Track it
Enter the current estimate from the budget, eight hundred and fifty-four kilograms. Add a milestone: the preliminary design review on the first of December, planned at eight hundred and eighty. Take a snapshot, and today's estimate joins the history. At every review, the chart shows whether the dock is on track, long before anything is built.
On screen: Current estimate; + Milestone; Take Snapshot.
Recap
Let's recap. You built a mass budget from the parts with counts, bases and contingency, set an allocation and read the margin, and created a TPM with a threshold, an objective, a milestone and a snapshot.
That completes Behavior and Architecture. You can now model functions and their flow, action diagrams, allocation, interfaces, simulation, budgets and TPMs.
On screen: Track complete card, then end card.