فصول الدورة
التدريب · المسار 6. الترحيل إلى Holarch · الفصل 6.5 من 5
6.5 التنظيف بعد الاستيراد 2:40
اعثر على التكرارات والمتطلبات الضعيفة، وأصلحها، وشغّل فحوص النموذج، واربط ما ورد منفصلًا.
يعرض Holarch 2.13.
ما ستتعلمه
- شغّل فحص الجودة على مستند مستورد واقرأ نتائجه
- أزل متطلبًا مكررًا وأعد كتابة متطلب مبهم
- شغّل فحوص النموذج للعثور على الأطراف السائبة في النموذج كله
- اربط المتطلبات المستوردة بالأصول التي تستوفيها
نظّف نموذج Plant Inspection Drone بعد استيراداته: شغّل فحص جودة المتطلبات للعثور على متطلب مكرر وآخر ضعيف، واحذف أحدهما وأعد كتابة الآخر، وشغّل فحوص النموذج، وتتبّع المتطلبات المستوردة إلى الأجزاء المستوردة التي تستوفيها.
ملفات المشاريع
- مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
- المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.
التطبيق العملي
نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.
- افتح مشروعك
EO-1 Import Practiceمن الفصول السابقة (أو استورد ملف CSV لمتطلبات EO-1 كما في الفصل 2). - افتح الاحتياجات والمتطلبات ← الجودة، واختر أحد المستندات المستوردة في شريط النطاق، وانقر فحص الجودة.
- إذا استوردت المتطلبات نفسها مرتين (Word وReqIF)، فحدد صف أحد المكررات في قاعدة البيانات واحذفه باستخدام حذف العنصر… في الشريط الجماعي. أعد كتابة 2.5 Safe Mode Recovery لتصبح قابلة للقياس، ثم افحص الجودة مرة أخرى.
- افتح التحقق ← فحوص النموذج وافتح القاعدة Requirement.8، المتطلبات الطرفية التي لا يستوفيها أي كيان تصميم.
- إذا استوردت الأصول أيضًا (الفصل 4)، فحدد 2.1 Pointing Accuracy، وفي التتبع أضف satisfied by باستخدام + ← ربط عنصر موجود… إلى ADCS. شغّل فحوص النموذج مرة أخرى.
تكون قد انتهيت عندما تحصل 2.5 على درجة أعلى من قبل ولا تعود Requirement.8 تذكر 2.1.
اختبر نفسك
- ما الذي ينظر إليه فحص الجودة، وما الذي تنظر إليه فحوص النموذج؟
- لماذا لا تتجاوز درجة الجودة التلقائية 78% أبدًا؟
- لماذا تربط المتطلبات والأجزاء مباشرة بعد الترحيل؟
إظهار الإجابات
ما الذي ينظر إليه فحص الجودة، وما الذي تنظر إليه فحوص النموذج؟
يقيّم فحص الجودة صياغة كل متطلب مقارنةً بصفات المتطلب الجيد. أما فحوص النموذج فتنظر في النموذج كله بحثًا عن ثغرات مثل متطلبات لا يستوفيها شيء، أو عناصر معزولة، أو إجراءات لا ينفّذها أحد.
لماذا لا تتجاوز درجة الجودة التلقائية 78% أبدًا؟
تحتاج صفتا «صحيح» و«قابل للتنفيذ» إلى حكم شخص، لذا لا يعلّمهما الفحص أبدًا كمستوفاتين. تعلّمهما أنت بعد مراجعة المتطلب.
لماذا تربط المتطلبات والأجزاء مباشرة بعد الترحيل؟
تصل من ملفات مختلفة دون روابط بينها. وكل رابط satisfied by يغذّي التتبع والتغطية وفحوص النموذج من ذلك الحين.
قراءة المزيد
النص المكتوب
إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)
Introduction
Chapter five: cleaning up after import. Imported data carries its old problems along, and the pieces arrive from different files unconnected. A short clean-up pass fixes both.
This is the last chapter of the migration track.
Quality check
Open Needs and Requirements, then Quality. Choose the imported tracker, and click Check Quality. Every requirement is scored against the qualities of a good requirement, and the findings say what to fix.
On screen: Quality → Document: PID Requirements Tracker → Check Quality.
Two findings stand out. Requirement 2.4 says the same thing as 2.1, in slightly different words: a duplicate from the old tracker. And 3.2 is vague: fast and easy to use cannot be measured, and the and joins two requirements in one.
On screen: Findings for 2.4 and 3.2.
Fix the findings
Remove the duplicate. In the Database, check the row of Crack Imaging, click Delete Entity in the bulk bar, and confirm.
On screen: Database → check 2.4 → Delete Entity… → Delete.
Then rewrite the vague one. Select Easy Operation, click its description, and replace it with something testable.
On screen: Easy Operation → Item → Description.
Run the quality check again. The duplicate is gone, and the rewritten requirement scores better.
On screen: Quality → Check Quality again.
Model checks
The model checks look at the whole model, not just the wording. Open Verification, then Model Checks. They list loose ends, such as requirements nothing satisfies yet, and each finding links to the item.
On screen: Verification → Model Checks.
Connect what came in
The requirements and the parts came from different files, so nothing connects them yet. Connect them. Select Crack Resolution in the Database. In Trace, click the plus on satisfied by, choose Link existing, and pick the camera payload.
On screen: 2.1 → Trace → satisfied by + → Link existing… → Camera Payload.
Wall Thickness is satisfied by the ultrasonic probe, in the same way. Each link you add now feeds traceability, coverage and the model checks from here on.
On screen: 2.2 → Trace → satisfied by + → Link existing… → Ultrasonic Probe.
Recap
Let's recap. You ran the quality check, removed a duplicate, rewrote a weak requirement, ran the model checks, and connected the imported requirements to the imported parts.
That completes Migrating to Holarch. You can now plan a migration, bring in spreadsheets, Word documents, ReqIF files and models from other tools, and clean up what arrives.
On screen: Track complete card, then end card.