Holarch
فصول الدورة

التدريب · المسار 1. البدء · الفصل 1.7 من 8

1.7 المشاركة والأدوار 2:24

ادعُ الأشخاص بالدور المناسب، وعلّق، وأسند العمل، وعدّلوا معًا.

يعرض Holarch 2.41.

ما ستتعلمه

  • ادعُ شخصًا إلى مشروع بالدور الذي يناسب عمله
  • اشرح ما يستطيع المالكون والمحررون والمراجعون والمشاهدون فعله وما لا يستطيعون
  • علّق على متطلب وأشر إلى عضو
  • أسند عنصرًا بتاريخ استحقاق واعثر عليه في «عملي»

شارك مشروع Bike-Share Dock: الأدوار الأربعة، ودعوة محرر ومراجع مجاني، والتعليقات على عنصر، وإسناد عنصر بتاريخ استحقاق ليظهر في «عملي»، وكيف يُظهر التحرير المباشر من غيرك في المشروع.

ملفات المشاريع

  • مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
  • المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)

يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.

التطبيق العملي

نفّذ هذا بنفسك في Holarch، على المشروع التوضيحي CubeSat EO-1.

  1. افتح مشروع EO-1 التوضيحي الخاص بك (أو أنشئه: إدارة المشاريع ← ملفات المشروع ▾ ← مشروع توضيحي جديد ← CubeSat (هندسة أنظمة موجّهة)). وتحتاج أيضًا إلى عنوان بريد إلكتروني ثانٍ يمكنك قراءته.
  2. انقر مشاركة على يمين الشريط العلوي. وتحت دعوة أشخاص، أدخل العنوان الثاني، واختر مراجع وانقر دعوة. وتحقق من أنه مدرج تحت الدعوات المعلّقة، ثم أغلق مربع الحوار.
  3. حدّد 6.4 Operator Interface في SRS. وفي قسم النقاش في لوحة الخصائص، اكتب سؤالًا عن القيمة القابلة للقياس التي يجب أن ينص عليها المتطلب، وانقر إضافة تعليق.
  4. في مجموعة سير العمل في لوحة الخصائص، اضبط المكلَّف على نفسك وتاريخ الاستحقاق على الأسبوع القادم. وافتح التخطيط ← عملي واعثر على المتطلب تحت مُسند إليّ.
  5. اقبل الدعوة من العنوان الثاني في نافذة متصفح خاصة. وبصفتك المراجع، افتح 6.4 وتأكد من أنك تستطيع الرد على التعليق لكن لا تستطيع تعديل النص.

تنتهي حين يكون 6.4 Operator Interface في «عملي» بتاريخ استحقاقه ويظهر رد المراجع في النقاش الخاص به.

اختبر نفسك

  1. يحتاج أحد أصحاب المصلحة إلى اعتماد المتطلبات لكن يجب ألا يغيّرها. أي دور تعطيه؟
  2. لماذا يمكنك إضافة مراجعين ومشاهدين دون بلوغ حد المتعاونين في الخطة؟
  3. إلى أين يجب أن يذهب سؤال عن متطلب واحد: إلى بريد إلكتروني أم إلى النقاش الخاص بالعنصر؟
إظهار الإجابات
  1. يحتاج أحد أصحاب المصلحة إلى اعتماد المتطلبات لكن يجب ألا يغيّرها. أي دور تعطيه؟

    مراجع. يقرأ المراجعون ويعلّقون، ويعتمدون المتطلبات أو يرفضونها أو يعيدون فتحها، لكنهم لا يستطيعون تعديل النموذج.

  2. لماذا يمكنك إضافة مراجعين ومشاهدين دون بلوغ حد المتعاونين في الخطة؟

    لا يُحتسب ضمن الحد إلا المالكون والمحررون؛ أما المراجعون والمشاهدون فلا.

  3. إلى أين يجب أن يذهب سؤال عن متطلب واحد: إلى بريد إلكتروني أم إلى النقاش الخاص بالعنصر؟

    النقاش الخاص بالعنصر. يبقى التعليق مع المتطلب، وتُشعر الإشارةُ الشخصَ، وينتظره في «عملي».

قراءة المزيد

النص المكتوب

إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)

Introduction

Chapter seven: sharing and roles. Holarch projects are shared by invitation, and each person gets a role that says what they may do.

Roles

Here is what each role allows.

On screen: Roles card.

Invite people

Click Share at the right of the top bar. Members lists who has access to the project. So far, that is only you, as the owner.

On screen: Share dialog.

Under Invite people, type a colleague's email address, keep the role Editor, and click Invite. The invitation is listed under Pending invitations until they accept it.

On screen: Invite [email protected] as Editor.

Invite a second person as a Reviewer. Only owners and editors count toward a plan's collaborator limit, so you can add reviewers and viewers freely.

On screen: Invite [email protected] as Reviewer.

Each person gets an email with a link. People without an account create one from it, and then the project appears in their Manage Projects. Click Done.

On screen: Done.

Comments and assignments

Discussion happens on the items themselves. Open Needs and Requirements, then Documents, and select the requirement Show Available Bikes. In the inspector, click Discussion, write a question, and click Add comment.

On screen: SRS → 4.1.1 → Discussion → Add comment.

Once your colleagues have joined, type an at sign in a comment to mention one of them. They get a notification, and the comment waits for them in My Work.

On screen: The comment.

Work can be assigned, too. Open the requirement in the Entity View, choose an assignee, here yourself, and set a due date.

On screen: Search → Show Available Bikes → Entity View → Assignee → Due date.

Plan and Deliver, then My Work, lists everything assigned to you, with due dates, and the comments and reviews that wait for you.

On screen: Plan & Deliver → My Work.

Edit together

Everyone with access can edit at the same time. When others have the project open, their badges appear next to Live in the top bar, and their changes reach you within about a second.

On screen: Live indicator.

Recap

Let's recap. You learned the four roles, invited an editor and a free reviewer, commented on a requirement, assigned it with a due date, found it in My Work, and saw where live editing shows who else is here.

In the last chapter of this track, you export, import and restore your project.