Holarch
课程章节

培训 · 课程 3. 行为和架构 · 第 3.6 章,共 6 章

3.6 预算和 TPM 3:31

汇总租车站的质量并计入余量和裕度,然后将其作为技术性能度量进行跟踪。

演示 Holarch 2.13。

← 3.5 仿真 · 所有章节

您将学到

  • 在根资产上建立预算,指定量、单位和所需裕度
  • 输入带依据的数值,并查看余量和裕度如何变化
  • 设置分配值并查看某一行的裕度状态
  • 创建带阈值、目标值、里程碑和快照的 TPM

根据 Bike-Share Dock 的部件建立其质量预算,包括数量、依据和余量,设置分配值并查看裕度,然后为租车站质量创建一个技术性能度量,包含阈值、目标值、计划里程碑和快照。

项目文件

  • 起始项目 (.holarch.json;管理项目 → 项目文件 ▾ → 导入项目 (.json)…)
  • 完成项目 (.holarch.json;管理项目 → 项目文件 ▾ → 导入项目 (.json)…)

视频从 holarch.app 播放;参见隐私政策。

练习

在 Holarch 中基于 CubeSat EO-1 演示项目亲自完成此操作。

  1. 打开您的 EO-1 演示项目,或创建它:管理项目 → 项目文件 ▾ → 新建演示项目 → CubeSat(引导式系统工程)。
  2. 打开 架构 → 预算和 TPM。在 预算 标签页上,保留 1 EO-1 Spacecraft 作为根,并将 量 改为 Power Draw。
  3. 找到 1.1 Payload Camera(6.2 W,估计值),将其 依据 改为 实测值。查看其余量和航天器裕度如何变化。
  4. 在数据库中通过 + 新建条目 创建一个 Measure:ADCS Mass,编号 TPM-4。设置 Units 为 kg、Threshold Value 为 1.35 kg、Objective Value 为 1.2 kg,Improvement Direction 为 Negative,添加标签 TPM,并通过 specified by 将其关联到 1.2 ADCS。
  5. 在 TPM 标签页上选择 TPM-4 ADCS Mass。将“预算”标签页中的 ADCS 质量(量为 Mass,CBE + 余量)输入为 当前估计,单击 + 里程碑 添加计划值为 1.3 kg 的 CDR,然后单击 拍摄快照。

当 TPM-4 ADCS Mass 列出状态、其计划曲线中有 CDR 里程碑、其估计历史中有一个快照点时,即完成练习。

自测

  1. 为什么余量取决于数值的依据?
  2. 裕度如何计算?某一行何时会发出警告?
  3. TPM 为预算增加了什么?
  4. 在 Holarch 中,什么使一个 Measure 成为 TPM?
显示答案
  1. 为什么余量取决于数值的依据?

    估计值不如计算值确定,计算值又不如测量值确定。按依据设置的余量(演示中为 15%、10% 和 3%)在数值越不确定的地方预留越多。

  2. 裕度如何计算?某一行何时会发出警告?

    裕度等于分配值减去当前最佳估计加余量。当裕度低于所需裕度时,该行显示 ▲ 低;当超出其分配值时,显示 ✕ 超出。

  3. TPM 为预算增加了什么?

    预算显示的是当前的汇总。TPM 在整个项目周期内对照计划曲线、阈值和目标值跟踪一个关键数值,因此在评审之前就能看出趋向超限的走势。

  4. 在 Holarch 中,什么使一个 Measure 成为 TPM?

    TPM 标签。带有该标签的 Measure 会列在 TPM 标签页上,同时列出具有 Threshold Value 的需求。

延伸阅读

文字稿

显示文字稿 (旁白和屏幕内容)

Introduction

Welcome back. A design is only as good as its margins. This last chapter of the track puts numbers on the dock's mass.

You will build a mass budget, and a technical performance measure that tracks it over time.

The budget

Open Architecture, then Budgets. Choose the root asset: the Bike-Share Dock. The quantity is mass, in kilograms. Every part under the dock gets a row.

On screen: Architecture → Budgets → root S.0; unit kg.

Enter each part's mass in the unit value column. A docking bay weighs fifty-five kilograms, and the dock has ten of them, so set its count to ten.

On screen: Docking Bay: 55, count 10.

The kiosk is a hundred and forty kilograms, the charging unit eighty, and the power supply thirty. The dock's row shows the sum of its parts.

On screen: Kiosk 140, Charging Unit 80, Power Supply 30.

Contingency and margin

Each value has a basis: estimated, calculated or measured. Contingency follows the basis, so a guess carries more than a part that has been weighed. Here every value is still an estimate.

On screen: Basis and contingency columns.

Set the allocation on the dock: nine hundred kilograms, the most the installation site can carry. The status says over: with fifteen percent contingency on every estimate, the dock comes to nine hundred and twenty kilograms, twenty over.

On screen: Allocation 900 on S.0 → Over allocation.

The docking bays are the biggest item. Once a bay has been weighed, its basis is measured, and its contingency drops to three percent. Set the docking bay's basis to Measured.

On screen: Docking Bay → Basis: Measured.

Now the dock is forty-six kilograms under its allocation, a margin of five percent. The project asks for ten, so the status still warns: the design needs either lighter parts or a larger allocation.

On screen: Margin 46 kg (5.11%) → Margin below 10%.

A technical performance measure

A budget is today's number. A technical performance measure, a TPM, tracks one critical number over the life of the project. Create a Measure in the Database: Dock Mass, numbered TPM one, in kilograms.

On screen: Database → New Entity: Measure TPM-1 Dock Mass.

Its threshold is nine hundred kilograms, the limit it must not pass, and its objective is eight hundred, the value the design aims for. For mass, lower is better, so its improvement direction is negative.

On screen: Units, Threshold 900, Objective 800, Improvement Direction.

What makes it a TPM is its label. Under Labels, click plus Label, and choose TPM.

On screen: Labels → + Label → TPM.

Back in Budgets, open the TPMs tab. Dock Mass is listed, with its threshold and objective.

On screen: Budgets → TPMs.

Track it

Enter the current estimate from the budget, eight hundred and fifty-four kilograms. Add a milestone: the preliminary design review on the first of December, planned at eight hundred and eighty. Take a snapshot, and today's estimate joins the history. At every review, the chart shows whether the dock is on track, long before anything is built.

On screen: Current estimate; + Milestone; Take Snapshot.

Recap

Let's recap. You built a mass budget from the parts with counts, bases and contingency, set an allocation and read the margin, and created a TPM with a threshold, an objective, a milestone and a snapshot.

That completes Behavior and Architecture. You can now model functions and their flow, action diagrams, allocation, interfaces, simulation, budgets and TPMs.

On screen: Track complete card, then end card.