Holarch
فصول الدورة

التدريب · المسار 14. جداول البيانات · الفصل 14.2 من 5

14.2 التنسيقات والتخطيط 3:16

نسّق الأرقام برموز التنسيق، وميّز الخلايا حسب القيمة، وادمج عنوانًا، وجمّد العناوين.

يعرض Holarch 2.35.

ما ستتعلمه

  • ادمج عنوانًا ووسّطه واجعل العناوين غامقة
  • لائم عرض الأعمدة مع محتوياتها
  • طبّق رموز تنسيق النسبة المئوية والأرقام المخصصة
  • ميّز القيم بقاعدة تنسيق شرطي
  • جمّد صفوف العناوين

نسّق ميزانية كتلة EO-1: ادمج عنوانًا فوق الأعمدة ووسّطه، واجعل العناوين غامقة، ولائم عرض الأعمدة، واعرض الاحتياطي كنسب مئوية، وأعطِ الكتل رمز تنسيق مخصصًا يضيف الوحدة، وميّز أثقل الأنظمة الفرعية بتنسيق شرطي، وجمّد العنوان والعناوين لتبقى ظاهرة.

ملفات المشاريع

  • مشروع البداية (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)
  • المشروع المكتمل (.holarch.json؛ إدارة المشاريع ← ملفات المشروع ▾ ← استيراد مشروع (.json)…)

يُشغَّل الفيديو من holarch.app؛ راجع سياسة الخصوصية.

التطبيق العملي

نفّذ هذا بنفسك في Holarch، على CubeSat EO-1.

  1. افتح ملف البداية للفصل، أو المصنف من الفصل 14.1، على ورقة الميزانية.
  2. اكتب EO-1 Mass Budget في A1. حدد A1:E1 وانقر دمج وتوسيط. حدد A1:E2 في مربع الاسم وانقر غامق.
  3. انقر نقرًا مزدوجًا على الحافة اليمنى لعناوين الأعمدة B وD وE لملاءمتها.
  4. حدد D3:D8 وانقر نسبة مئوية. حدد C3:C8، وافتح تنسيق الخلايا ← مخصص واكتب 0.00" kg". افعل الشيء نفسه لـ E3:E10، وأعطِ E11 الرمز 0.0%.
  5. حدد E3:E8 وافتح التنسيق الشرطي ← قواعد تمييز الخلايا ← أكبر من؛ واكتب 2.
  6. حدد A3 واختر تجميد الأجزاء. مرّر لأسفل: يبقى الصفان 1 و2 ظاهرين.

تكون قد انتهيت عندما تُقرأ الكتل بالكيلوغرام، ويُقرأ الهامش كنسبة مئوية، وتُميَّز الأنظمة الفرعية التي تزيد على 2 kg، وتبقى العناوين في مكانها عند التمرير.

اختبر نفسك

  1. ماذا يفعل رمز التنسيق 0.00" kg" بالقيمة 2.5؟
  2. لماذا يُبقي تحديد A3 قبل «تجميد الأجزاء» الصفين 1 و2 ظاهرين؟
  3. هل تغيّر قاعدة التنسيق الشرطي قيمة الخلية؟
إظهار الإجابات
  1. ماذا يفعل رمز التنسيق 0.00" kg" بالقيمة 2.5؟

    تعرض 2.50 kg. وتبقى القيمة هي العدد 2.5، فتظل الصيغ تحسب بها.

  2. لماذا يُبقي تحديد A3 قبل «تجميد الأجزاء» الصفين 1 و2 ظاهرين؟

    يجمّد «تجميد الأجزاء» الصفوف فوق الخلية النشطة والأعمدة على يسارها.

  3. هل تغيّر قاعدة التنسيق الشرطي قيمة الخلية؟

    لا. يغيّر فقط مظهر الخلية ما دام شرطه متحققًا.

قراءة المزيد

النص المكتوب

إظهار النص المكتوب (التعليق الصوتي وما يظهر على الشاشة)

Introduction

Chapter two: formats and layout. A format changes how a value looks, never the value itself, so formulas keep calculating with the full number.

In this chapter you make the budget easy to read.

Title and headings

Give the sheet a title. In A1, type EO-1 Mass Budget.

On screen: A1: EO-1 Mass Budget.

Select A1 to E1 in the Name Box. Open Merge, and choose Merge and Center: the five cells become one, with the title in the middle.

On screen: Name Box A1:E1 → Merge ▾ → Merge & Center.

Make the title and the headings bold: select them, and click Bold, or press Command B.

On screen: Name Box A1:E2 → Bold.

The subsystem names are wider than their column. Double-click the right edge of column B's heading, and the column fits its longest entry. Do the same for D and E.

On screen: Double-click the header borders of B, D and E: the columns fit.

Number formats

Now the numbers. Select the contingencies, D3 to D8, and click Percent. Zero point one shows as ten percent.

On screen: Name Box D3:D8 → %.

Select the masses, C3 to C8, and open Number Format. The menu lists the common formats, with a sample of each. Choose More Number Formats.

On screen: Name Box C3:C8 → Number Format ▾ → More Number Formats….

Format Cells shows the format as a code. Choose Custom, and type zero point zero zero, then a space and k g, in quotes. Text in quotes is shown as it is, so each mass reads in kilograms. The sample shows the result. Click OK.

On screen: Category: Custom; code 0.00 " kg" → sample → OK.

The masses with contingency get the same code. Select E3 to E10, open More Number Formats again, choose Custom, and type the code.

On screen: Name Box E3:E10 → More Number Formats… → Custom → 0.00 " kg" → OK.

The margin is a fraction. Select E11, and give it the code zero point zero percent: a percentage with one decimal.

On screen: E11 → More Number Formats… → Custom → 0.0% → OK.

Conditional formatting

Conditional formatting colors cells by their values. Select E3 to E8, open Conditional Formatting, then Highlight Cells Rules, and choose Greater Than.

On screen: Name Box E3:E8 → Conditional Formatting ▾ → Highlight Cells Rules ▸ → Greater Than….

Type two, keep the red fill, and click OK. The two heaviest subsystems stand out, and the color follows the values when they change.

On screen: Value 2 → OK: Payload Camera and Structure and Thermal turn red.

Freeze panes

Last, freeze panes keep the title and headings in view while you scroll. Select A3, open Freeze, and choose Freeze Panes: everything above the active cell stays put.

On screen: A3 → Freeze ▾ → Freeze Panes.

Scroll the sheet down. The rows move under the frozen title and headings.

On screen: Scroll down, then back up.

Recap

To recap: merge and center a title, fit columns by double-clicking their edge, choose formats from the menu or write a format code, color cells with a rule, and freeze the headings.

In the next chapter, you turn the budget into a table, find and replace text, and save views.