Holarch
과정의 장

교육 · 트랙 13. 화이트보드 · 13.1장 (전체 4장)

13.1 도형과 선 3:15

화이트보드를 만들고, 도형을 그리고, 도형 안에 텍스트를 입력하고, 선과 화살표로 연결합니다.

Holarch 2.35 화면입니다.

모든 장 · 13.2 곡선과 선 레이블 →

학습 내용

  • 프로젝트에서 화이트보드 만들기
  • 도구 모음 도구, 단축키, 도형 패널로 도형 그리기
  • 도형에 텍스트를 입력하고 더하기 핸들로 연결된 복사본 추가하기
  • 선 옵션 표시줄에서 선택한 화살표와 꺾은선으로 도형 연결하기

Bike-Share Dock의 콘셉트 보드를 시작합니다. 화이트보드를 만들고, 도구 모음 도구와 도형 패널로 도형을 그리고, 도형에 텍스트를 입력하고, 더하기 핸들로 연결된 복사본을 추가하고, 그리기 전에 선 옵션 표시줄에서 유형, 화살촉, 스타일을 선택한 화살표와 꺾은선으로 도형을 연결합니다.

프로젝트 파일

  • 시작 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)
  • 완성 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)

동영상은 holarch.app에서 재생됩니다. 개인정보 처리방침을 참조하십시오.

실습

Bike-Share Dock에서 Holarch로 직접 해 보십시오.

  1. 이 장의 시작 파일 또는 직접 만든 프로젝트를 열고 계획 → 화이트보드를 엽니다. + 새 화이트보드를 클릭하고 이름을 Dock Concept로 지정합니다.
  2. 사각형 도구를 클릭하고 상자를 끕니다. Enter를 누르고 Rental Kiosk를 입력한 다음 Esc를 누릅니다.
  3. 상자를 선택한 상태에서 상자 아래의 더하기 핸들을 클릭하고 Docking Bay를 입력합니다.
  4. 도형 패널에서 cloud를 검색해 클릭하고, 오른쪽으로 끌어 놓은 다음 Back Office를 입력합니다. O를 누르고 왼쪽에 타원을 그린 다음 Rider를 입력합니다.
  5. Esc를 누른 다음 A를 누릅니다. kiosk에서 back office까지 끕니다. A를 다시 누르고, 선 옵션 표시줄에서 꺾은선을 선택한 다음 docking bay에서 back office까지 그립니다.
  6. back office를 옮기고 두 선이 따라오는지 확인합니다.

보드에 레이블이 있는 도형 네 개, 화살표 하나, 꺾은선 하나가 있고 도형을 옮겨도 두 선이 붙어 있으면 완료입니다.

스스로 확인

  1. A나 O 같은 도구 키를 누르기 전에 Esc를 누르는 이유는 무엇입니까?
  2. 선을 그리기 전에 선 유형과 화살촉은 어디에서 선택합니까?
  3. 선 끝을 연결점이 아니라 도형 본체 위에서 놓으면 어떻게 됩니까?
답 보기
  1. A나 O 같은 도구 키를 누르기 전에 Esc를 누르는 이유는 무엇입니까?

    도형을 선택하면 글자가 도형 안에 입력됩니다. Esc로 선택을 해제해야 그 키가 도구를 선택합니다.

  2. 선을 그리기 전에 선 유형과 화살촉은 어디에서 선택합니까?

    선 또는 화살표 도구를 선택하면 보드 위에 열리는 선 옵션 표시줄에서 선택합니다.

  3. 선 끝을 연결점이 아니라 도형 본체 위에서 놓으면 어떻게 됩니까?

    선 끝이 고정되지 않고, 가장 가까운 면에 붙으며 도형이 움직이면 도형 둘레를 따라 이동합니다.

더 읽어 보기

대본

대본 보기 (내레이션과 화면 내용)

Introduction

Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.

In this chapter you create the board, draw and label shapes, and connect them with lines.

A new whiteboard

Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.

On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.

The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.

On screen: The editor: toolbar, Shapes panel, board, inspector.

Shapes and text

Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.

On screen: Rectangle tool → drag on the board.

To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.

On screen: Enter → Rental Kiosk → Esc.

Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.

On screen: Plus handle below → Docking Bay.

The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.

On screen: Shapes panel → search: cloud → Cloud.

Drag the cloud to the right of the kiosk, and type Back Office.

On screen: Drag the cloud right → Back Office.

Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.

On screen: O → drag → Rider.

Lines and arrows

Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.

On screen: A → the Line options bar.

Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.

On screen: Drag Rental Kiosk → Back Office.

An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.

On screen: Drag Back Office down.

For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.

On screen: A → Elbow → drag Docking Bay → Back Office.

Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.

On screen: Line section in the inspector.

Recap

To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.

In the next chapter, you shape a curved line and place labels on it.