과정의 장
교육 · 트랙 1. 시작하기 · 1.2장 (전체 8장)
1.2 첫 프로젝트 5:43
프로젝트를 만들고, 클래스가 무엇인지 배우고, 첫 항목을 추가합니다.
Holarch 2.41 화면입니다.
학습 내용
- 프로젝트 관리에서 이름과 설명이 있는 프로젝트 만들기
- 니즈, 제약 조건, 요구사항, 기능, 부품에 알맞은 LML 클래스 고르기
- + 새 항목으로 항목을 만들고 번호와 레이블 지정하기
- 표에서 항목을 편집하고 변경을 실행 취소 및 다시 실행하기
과정의 나머지 부분에서 사용할 Bike-Share Dock 프로젝트를 만들고, 항목의 클래스가 무엇을 뜻하는지 배우고, 데이터베이스에 첫 이해관계자 니즈, 레이블이 붙은 제약 조건, 요구사항, 기능, 시스템을 추가합니다. 표에서 편집하고 실행 취소합니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 여십시오(또는 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)).
- 레일 아래쪽의 데이터베이스를 클릭한 다음 + 새 항목을 클릭합니다. 클래스 Statement를 선택하고, 이름을
Field Boundary Overlays, 번호를N4로 지정하고, 니즈를 설명한 다음(농학자는 각 식생 지도에 경작지 경계가 그려지기를 원함) 만들기를 클릭합니다. - 두 번째 Statement
Rideshare Mass Limit, 번호C1을 만들고, 우주선이 디스펜서의 질량 한계를 넘으면 안 된다고 기술합니다. 속성 패널에서 + 레이블을 클릭하고 Constraint를 선택합니다. - shall 문장으로 작성한 Requirement
Field Boundary Layer, 번호6.6을 만들고 상태가 Draft인지 확인합니다. 그런 다음 ActionOverlay Field Boundaries, 번호F12를 만듭니다. - 표에서 N4의 설명을 더블클릭하고 단어 하나를 바꾼 다음 Enter 키를 누릅니다. ⌘Z / Ctrl+Z를 눌러 실행 취소하고 ⇧⌘Z / Ctrl+Shift+Z를 눌러 다시 실행합니다.
- + 필터를 클릭하고 클래스 Statement를 선택하여 니즈와 제약 조건을 함께 봅니다.
Statement 필터에 N1부터 N4와 C1이 나열되고, C1에 Constraint 레이블이 있으며, 6.6 Field Boundary Layer의 상태가 Draft로 표시되면 완료입니다.
스스로 확인
- 항목을 만들 때 클래스가 중요한 이유는 무엇입니까?
- 이해관계자가 운영자가 집에서 패스를 계획할 수 있어야 한다고 말합니다. 이것은 Statement입니까, Requirement입니까?
- 클래스가 이미 항목이 무엇인지 말해 준다면 레이블은 무엇을 위한 것입니까?
답 보기
항목을 만들 때 클래스가 중요한 이유는 무엇입니까?
클래스는 항목이 가질 수 있는 속성과 관계를 정합니다. Holarch는 그 항목에 맞는 연결만 제시합니다. 자산은 액션을 수행할 수 있지만 위험은 그렇지 않습니다.
이해관계자가 운영자가 집에서 패스를 계획할 수 있어야 한다고 말합니다. 이것은 Statement입니까, Requirement입니까?
Statement입니다. 이해관계자의 말로 표현된 니즈입니다. 이를 공식화하는 요구사항은 나중에 만들어져 이 니즈로 추적됩니다.
클래스가 이미 항목이 무엇인지 말해 준다면 레이블은 무엇을 위한 것입니까?
레이블은 한 클래스의 항목을 종류별로 나눕니다. 예를 들어 Constraint 레이블이 붙은 Statement처럼, 새 클래스 없이도 종류별로 필터링하고 보고할 수 있습니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter two: your first project. You will create a project for a new system, learn what an item's class means, and add the model's first items.
This is the project the rest of the course builds on, so it is worth following along in your own account.
Create the project
In Manage Projects, click New Project. Name the project after the system. Our example for this course is a bike-share dock: a station on the street that holds, locks, charges and rents out bicycles.
On screen: + New Project → Bike-Share Dock.
Add a short description, so others know what the project covers. The folder is optional: it only groups projects in this list. Then click Create Project.
On screen: Description → Create Project.
The new project opens on Home. It is empty for now, so Next actions has one suggestion: write or import the first requirements.
On screen: Home of the new project.
Classes
Everything in a model is an item, which Holarch also calls an entity. Its class says what kind of thing it is. The classes come from the Lifecycle Modeling Language, L M L, and a few of them cover most of the work.
On screen: Concept card: the main classes.
The class decides which attributes and relationships an item can have. A requirement can be satisfied by an asset, and an asset can perform an action, but a risk cannot perform anything. Holarch only offers the links that make sense.
On screen: Concept card.
Create items
Open the Database at the bottom of the rail. In a new project, the table is empty.
On screen: Database (empty).
Click New Entity in the top bar. Choose the class first. Start with a Statement: a good model begins with what people need, before any requirement.
On screen: + New Entity → Statement.
Name it Find a Bike Nearby, number it N.1, and describe the need in the rider's own words. Then click Create.
On screen: Name, number, description → Create.
The new item is selected, and the inspector on the right shows it. Every field can be changed there later.
On screen: The inspector shows N.1.
Add the operator's need the same way: Return Bikes Without Staff, number N.2.
On screen: + New Entity → Statement N.2.
Constraints are statements too. Create one: the dock must fit on a standard sidewalk.
On screen: + New Entity → Statement C.1.
Labels and numbers
Then click Label in the inspector, and choose Constraint. Labels sort the items of one class into kinds, and you can filter and report by them.
On screen: Inspector → + Label → Constraint.
Now the first requirement. Choose the class Requirement, name it Unlock a Bike, number it 1.1, and write it as a shall statement.
On screen: + New Entity → Requirement 1.1.
New requirements start with the status Draft. As the team reviews them, the status moves to In Review and then Approved; a later chapter shows how.
On screen: Inspector → Attributes → Status.
Functions are Actions: what the system does. Create Rent a Bike, number F.1.
On screen: + New Entity → Action F.1.
Parts are Assets. Create the system itself, Bike-Share Dock, number S.0, and give it the label System.
On screen: + New Entity → Asset S.0, label System.
The other parts, functions and requirements are added the same way: the docking bays, the kiosk, the charging unit and the operator's back office; returning a bike, charging and payment; and two more requirements.
On screen: The rest entered off camera; the table fills.
Edit and undo
You can also edit right in the table. Double-click a number or a description, type, and press Enter.
On screen: Double-click the description of Charge Bikes → edit.
Every change is one undo step. Click Undo in the top bar, or press Command Z, and the old text is back. Redo brings the change back again.
On screen: Undo, then Redo.
To see one kind of item at a time, click Filter and choose a class. Here are the assets of the dock.
On screen: + Filter → Asset.
Recap
Let's recap. You created the Bike-Share Dock project, learned what classes are, and added needs, a constraint, a requirement, a function and the system, with numbers and labels, in the Database.
Next, you describe these items with attributes and connect them with relationships.