과정의 장
교육 · 트랙 6. Holarch로 마이그레이션 · 6.5장 (전체 5장)
6.5 가져온 후 정리 2:40
중복되거나 약한 요구사항을 찾아 고치고, 모델 검사를 실행하고, 따로 들어온 것을 연결합니다.
Holarch 2.13 화면입니다.
학습 내용
- 가져온 문서에 품질 검사를 실행하고 발견 사항 읽기
- 중복된 요구사항을 제거하고 모호한 요구사항을 다시 쓰기
- 모델 검사를 실행하여 모델 전체의 마무리되지 않은 부분 찾기
- 가져온 요구사항을 그것을 충족하는 자산에 연결하기
가져오기 후 Plant Inspection Drone 모델을 정리합니다. 요구사항 품질 검사를 실행하여 중복 요구사항과 약한 요구사항을 찾고, 하나는 삭제하고 다른 하나는 다시 쓰고, 모델 검사를 실행하고, 가져온 요구사항을 그것을 충족하는 가져온 부품으로 추적합니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- 앞 장에서 만든
EO-1 Import Practice프로젝트를 여십시오(또는 2장처럼 EO-1 요구사항의 CSV를 가져오십시오). - 니즈 및 요구사항 → 품질을 열고 범위 표시줄에서 가져온 문서 중 하나를 선택한 다음 품질 검사를 클릭합니다.
- 같은 요구사항을 두 번(Word와 ReqIF) 가져왔다면 데이터베이스에서 중복 항목의 행을 선택하고 일괄 작업 표시줄의 항목 삭제…로 삭제합니다. 2.5 Safe Mode Recovery를 측정 가능하게 다시 쓴 다음, 품질을 다시 검사합니다.
- 검증 → 모델 검사를 열고 규칙 Requirement.8, 어떤 설계 엔터티도 충족하지 않는 말단 요구사항을 엽니다.
- 자산도 가져왔다면(4장), 2.1 Pointing Accuracy를 선택하고 추적에서 + → 기존 항목 연결…로 ADCS에 대한 satisfied by를 추가합니다. 모델 검사를 다시 실행합니다.
2.5의 점수가 이전보다 높고 Requirement.8에 더 이상 2.1이 나열되지 않으면 완료입니다.
스스로 확인
- 품질 검사는 무엇을 보고, 모델 검사는 무엇을 봅니까?
- 자동 품질 점수가 78%를 넘지 않는 이유는 무엇입니까?
- 마이그레이션 직후에 요구사항과 부품을 연결하는 이유는 무엇입니까?
답 보기
품질 검사는 무엇을 보고, 모델 검사는 무엇을 봅니까?
품질 검사는 각 요구사항의 표현을 좋은 요구사항의 특성과 비교해 점수를 매깁니다. 모델 검사는 모델 전체에서 아무것도 충족하지 않는 요구사항, 홀로 있는 항목, 아무도 수행하지 않는 액션 같은 누락을 찾습니다.
자동 품질 점수가 78%를 넘지 않는 이유는 무엇입니까?
정확성(Correct)과 실현 가능성(Feasible)은 사람의 판단이 필요하므로 검사는 이를 충족으로 표시하지 않습니다. 요구사항을 검토한 후 직접 표시합니다.
마이그레이션 직후에 요구사항과 부품을 연결하는 이유는 무엇입니까?
서로 다른 파일에서 연결 없이 들어오기 때문입니다. 그 후로는 각 satisfied by 연결이 추적성, 커버리지, 모델 검사에 반영됩니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter five: cleaning up after import. Imported data carries its old problems along, and the pieces arrive from different files unconnected. A short clean-up pass fixes both.
This is the last chapter of the migration track.
Quality check
Open Needs and Requirements, then Quality. Choose the imported tracker, and click Check Quality. Every requirement is scored against the qualities of a good requirement, and the findings say what to fix.
On screen: Quality → Document: PID Requirements Tracker → Check Quality.
Two findings stand out. Requirement 2.4 says the same thing as 2.1, in slightly different words: a duplicate from the old tracker. And 3.2 is vague: fast and easy to use cannot be measured, and the and joins two requirements in one.
On screen: Findings for 2.4 and 3.2.
Fix the findings
Remove the duplicate. In the Database, check the row of Crack Imaging, click Delete Entity in the bulk bar, and confirm.
On screen: Database → check 2.4 → Delete Entity… → Delete.
Then rewrite the vague one. Select Easy Operation, click its description, and replace it with something testable.
On screen: Easy Operation → Item → Description.
Run the quality check again. The duplicate is gone, and the rewritten requirement scores better.
On screen: Quality → Check Quality again.
Model checks
The model checks look at the whole model, not just the wording. Open Verification, then Model Checks. They list loose ends, such as requirements nothing satisfies yet, and each finding links to the item.
On screen: Verification → Model Checks.
Connect what came in
The requirements and the parts came from different files, so nothing connects them yet. Connect them. Select Crack Resolution in the Database. In Trace, click the plus on satisfied by, choose Link existing, and pick the camera payload.
On screen: 2.1 → Trace → satisfied by + → Link existing… → Camera Payload.
Wall Thickness is satisfied by the ultrasonic probe, in the same way. Each link you add now feeds traceability, coverage and the model checks from here on.
On screen: 2.2 → Trace → satisfied by + → Link existing… → Ultrasonic Probe.
Recap
Let's recap. You ran the quality check, removed a duplicate, rewrote a weak requirement, ran the model checks, and connected the imported requirements to the imported parts.
That completes Migrating to Holarch. You can now plan a migration, bring in spreadsheets, Word documents, ReqIF files and models from other tools, and clean up what arrives.
On screen: Track complete card, then end card.