コースのチャプター
Training · Track 13. Whiteboards · Chapter 13.1 of 4
13.1 図形と線 3:15
ホワイトボードを作成し、図形を描き、文字を入力し、線と矢印で接続します。
Holarch 2.35 の画面です。
学習内容
- プロジェクトにホワイトボードを作成する
- ツールバーのツール、キー、図形パネルで図形を描く
- 図形に文字を入力し、プラスのハンドルで接続されたコピーを追加する
- 線のオプションバーで選んだ矢印とカギ線で図形を接続する
Bike-Share Dock のコンセプトボードを作り始めます。ホワイトボードを作成し、ツールバーのツールと図形パネルで図形を描き、文字を入力し、プラスのハンドルで接続されたコピーを追加し、描く前に線のオプションバーで種類、矢印の形、スタイルを選んだ矢印とカギ線で図形を接続します。
プロジェクトファイル
- 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
- 完成時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。
演習
Bike-Share Dock を使って、Holarch で実際に操作します。
- チャプターの開始ファイル、または任意のプロジェクトを開き、計画 → ホワイトボードを開きます。+ 新しいホワイトボードをクリックして、名前を
Dock Conceptにします。 - 四角形ツールをクリックしてボックスをドラッグします。Enter を押し、
Rental Kioskと入力して Esc を押します。 - ボックスを選択した状態で、その下にあるプラスのハンドルをクリックし、
Docking Bayと入力します。 - 図形パネルで
cloudを検索してクリックし、右にドラッグしてBack Officeと入力します。O を押し、左に楕円を描いてRiderと入力します。 - Esc、続けて A を押します。kiosk から back office までドラッグします。もう一度 A を押し、線のオプションバーでカギ線を選択し、docking bay から back office まで描きます。
- back office を動かして、両方の線が追従することを確認します。
ボードにラベル付きの図形が 4 つ、矢印とカギ線が 1 本ずつあり、図形を動かしても両方の線が接続されたままであれば完了です。
確認問題
- A や O などのツールキーの前に Esc を押すのはなぜですか。
- 線を描く前に、線の種類と矢印の形はどこで選びますか。
- 線の端を、接続点ではなく図形の本体の上で離すと、どうなりますか。
解答を表示
A や O などのツールキーの前に Esc を押すのはなぜですか。
図形を選択している間は、キー入力が図形内の文字になります。Esc で選択を解除すると、キーがツールの選択になります。
線を描く前に、線の種類と矢印の形はどこで選びますか。
線のオプションバーです。線または矢印のツールを選ぶと、ボードの上に表示されます。
線の端を、接続点ではなく図形の本体の上で離すと、どうなりますか。
端は固定されません。最も近い辺に接続され、図形が動くと図形の周りを移動します。
関連資料
トランスクリプト
トランスクリプトを表示 (ナレーションと画面の内容)
Introduction
Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.
In this chapter you create the board, draw and label shapes, and connect them with lines.
A new whiteboard
Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.
On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.
The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.
On screen: The editor: toolbar, Shapes panel, board, inspector.
Shapes and text
Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.
On screen: Rectangle tool → drag on the board.
To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.
On screen: Enter → Rental Kiosk → Esc.
Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.
On screen: Plus handle below → Docking Bay.
The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.
On screen: Shapes panel → search: cloud → Cloud.
Drag the cloud to the right of the kiosk, and type Back Office.
On screen: Drag the cloud right → Back Office.
Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.
On screen: O → drag → Rider.
Lines and arrows
Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.
On screen: A → the Line options bar.
Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.
On screen: Drag Rental Kiosk → Back Office.
An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.
On screen: Drag Back Office down.
For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.
On screen: A → Elbow → drag Docking Bay → Back Office.
Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.
On screen: Line section in the inspector.
Recap
To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.
In the next chapter, you shape a curved line and place labels on it.