과정의 장
교육 · 트랙 1. 시작하기 · 1.3장 (전체 8장)
1.3 속성과 관계 3:29
항목을 설명하고 서로 연결하여 모델을 만듭니다.
Holarch 2.41 화면입니다.
학습 내용
- 속성 패널에서 요구사항의 근거 같은 항목 속성 편집하기
- 기존 항목 연결…로 항목을 관계 짓고 각 연결을 양쪽 끝에서 읽기
- 자산을 부품으로 분해하고 기능을 수행하는 부품에 할당하기
- 기능을 그것이 충족하는 요구사항으로 추적하기
- 항목 보기에서 관련 항목을 따라 모델 둘러보기
Bike-Share Dock의 항목을 속성(설명, 근거, 상태)으로 설명하고 관계로 연결합니다. 요구사항을 그 출처인 니즈로 추적하고, 시스템을 부품으로 분해하고, 어느 부품이 어느 기능을 수행하며 어느 기능이 어느 요구사항을 충족하는지 지정하고, 속성 패널과 항목 보기에서 모든 연결을 양쪽 끝에서 읽습니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 여십시오(또는 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)).
- 데이터베이스에서 2.5 Safe Mode Recovery를 선택하고 속성 패널에 근거를 입력합니다(우주선이 스스로 안전 모드를 벗어나야 하는 이유).
- F10 Enter Safe Mode를 선택합니다. 추적에서 satisfies를 찾고(목록에 없으면 모든 관계 표시를 선택), + → 기존 항목 연결…을 클릭한 다음 2.5 Safe Mode Recovery를 선택하고 선택 항목 연결을 클릭합니다. 2.5를 선택하고 satisfied by 아래에서 같은 연결을 찾습니다.
- 1.4 C&DH를 선택하고 모든 관계 표시를 선택한 다음, 아직 어떤 부품도 수행하지 않는 유일한 운영 단계인 OPS.9 Hold Data Onboard와 performs로 관계를 맺습니다.
- 2.2 Mission Operations Center를 선택합니다. decomposed by에서 + → 새 Asset…을 클릭하고
Image Processing Server를 만듭니다. - F10 Enter Safe Mode를 더블클릭하여 항목 보기를 연 다음, 관련 이름을 클릭하며 이동합니다. F10에서 1.4 C&DH로, 거기서 1 EO-1 Spacecraft로 갑니다.
2.5 Safe Mode Recovery의 항목 보기에서 satisfied by 아래에 F10이 나열되고, OPS.9의 performed by 아래에 1.4 C&DH가 나열되면 완료입니다.
스스로 확인
- F10에서 satisfies로 연결을 추가합니다. 추가 단계 없이도 2.5에 satisfied by가 표시되는 이유는 무엇입니까?
- 기존 항목 연결…의 선택기가 프로젝트의 모든 항목을 제시하지 않는 이유는 무엇입니까?
- 자산을 액션과 performs로 관계 지으면 시스템 엔지니어링 관점에서 무엇이 기록됩니까?
답 보기
F10에서 satisfies로 연결을 추가합니다. 추가 단계 없이도 2.5에 satisfied by가 표시되는 이유는 무엇입니까?
각 관계에는 방향마다 이름이 있습니다. 하나의 연결이며, 기능 쪽에서는 satisfies로, 요구사항 쪽에서는 satisfied by로 읽습니다.
기존 항목 연결…의 선택기가 프로젝트의 모든 항목을 제시하지 않는 이유는 무엇입니까?
이 항목에 대해 관계가 허용하는 클래스의 항목만 나열하므로, 스키마가 정의하지 않은 연결은 만들 수 없습니다.
자산을 액션과 performs로 관계 지으면 시스템 엔지니어링 관점에서 무엇이 기록됩니까?
기능을 그것을 실행하는 물리적 부품에 할당하는 것입니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter three: attributes and relationships. Attributes describe an item. Relationships connect items, and they are what turn a list of items into a model.
We continue with the Bike-Share Dock project from the last chapter.
Attributes
Open the Database, and select the requirement Unlock a Bike. The inspector's Item section holds its number, name and description. Below it, Attributes holds the attributes of its class, such as a rationale and a status.
On screen: Database → 1.1 Unlock a Bike → Attributes.
A rationale says why the requirement exists, which helps when someone later wants to change it. Type it in, and click elsewhere to save.
On screen: Rationale.
Asset and Action have their own attributes, such as a function's duration, which simulation uses later. A project owner can add attributes to any class in the Schema.
On screen: Attributes of an Action.
Relate items
Now the relationships. Select Unlock a Bike again, and click Trace in the inspector. It groups the relations of this class by purpose. Find traced from, click its plus button, and choose Link existing.
On screen: Trace → traced from → + → Link existing…
The picker lists only items that this relation allows. Check Find a Bike Nearby, the need this requirement answers, and click Link Selected.
On screen: Pick N.1 → Link Selected.
Every relationship has a name in each direction. Select the need, and its Trace shows the same link the other way round: Find a Bike Nearby is traced to Unlock a Bike.
On screen: N.1 → traced to 1.1.
Structure and allocation
Next, the system's structure. Select Bike-Share Dock, find decomposed by, and relate its three parts at once: the docking bay, the kiosk and the charging unit. The back office service is an external system, outside the dock, so it is not one of its parts.
On screen: S.0 → decomposed by → S.1–S.3.
Then say which part does what. Select the kiosk. Performs has no links yet, so tick Show all relations, and relate the kiosk with performs to Rent a Bike and Take Payment. In systems engineering terms, you are allocating functions to the physical parts.
On screen: S.2 Kiosk → Show all relations → performs → F.1, F.4.
The docking bay performs Return a Bike, and the charging unit performs Charge Bikes. They are related the same way.
On screen: S.1, S.3 performs (entered off camera).
Finally, link the function to the requirement it meets. Select Rent a Bike, and relate it with satisfies to Unlock a Bike.
On screen: F.1 → satisfies → 1.1.
Reading the links
Trace shows the relations that have links, plus a few kept visible even when empty. Untick Show all relations, and you see just what this function is connected to.
On screen: Trace → Show all relations off.
Double-click the row to open the Entity View. It shows the same sections on a full page, and linking works here too.
On screen: Entity View of Rent a Bike.
Click a related item's name to move to it. From the function, go to the kiosk that performs it, and from there to the dock it belongs to. This is how you walk the model.
On screen: Entity View: → Kiosk → Bike-Share Dock.
Recap
Let's recap. You edited attributes, related items with Link existing, read each link from both ends, decomposed the system, allocated functions to parts, and walked the links in the Entity View.
Next, you draw part of this model as a diagram.