פרקי הקורס
הדרכה · מסלול 13. לוחות ציור · פרק 13.1 מתוך 4
13.1 צורות וקווים 3:15
יוצרים לוח ציור, משרטטים צורות, מקלידים בהן ומחברים אותן בקווים ובחצים.
מציג את Holarch 2.35.
מה תלמדו
- ליצור לוח ציור בפרויקט
- לשרטט צורות עם כלי סרגל הכלים, המקשים וחלונית הצורות
- להקליד טקסט בצורה ולהוסיף עותקים מחוברים עם ידיות הפלוס
- לחבר צורות בחצים ובקווי מרפק שנבחרים בסרגל אפשרויות הקו
מתחילים לוח קונספט עבור Bike-Share Dock: יוצרים לוח ציור, משרטטים צורות עם כלי סרגל הכלים וחלונית הצורות, מקלידים בהן טקסט, מוסיפים עותקים מחוברים עם ידיות הפלוס, ומחברים צורות בחצים ובקווי מרפק שאת הסוג, ראשי החצים והסגנון שלהם בוחרים בסרגל אפשרויות הקו לפני השרטוט.
קובצי פרויקט
- פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
- פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.
תרגול
עושים את זה בעצמכם ב-Holarch, על Bike-Share Dock.
- פותחים את קובץ ההתחלה של הפרק, או כל פרויקט משלכם, ופותחים את תוכנית ← לוחות ציור. לוחצים על + לוח ציור חדש ונותנים לו את השם
Dock Concept. - לוחצים על כלי המלבן וגוררים תיבה. לוחצים הזנה, מקלידים
Rental Kioskולוחצים Esc. - כשהתיבה בחורה, לוחצים על ידית הפלוס שמתחתיה ומקלידים
Docking Bay. - בחלונית צורות מחפשים
cloud, לוחצים עליו, גוררים אותו ימינה ומקלידיםBack Office. לוחצים O, משרטטים אליפסה משמאל ומקלידיםRider. - לוחצים Esc, ואז A. גוררים מהקיוסק אל המשרד האחורי. לוחצים שוב A, בוחרים מרפק בסרגל אפשרויות הקו ומשרטטים מתא העגינה אל המשרד האחורי.
- מזיזים את המשרד האחורי ורואים ששני הקווים עוקבים אחריו.
סיימתם כשבלוח יש ארבע צורות עם תוויות, חץ וקו מרפק, ושני הקווים נשארים מחוברים כשמזיזים צורה.
בדיקה עצמית
- למה ללחוץ Esc לפני מקש כלי כמו A או O?
- איפה בוחרים את סוג הקו ואת ראשי החצים שלו לפני השרטוט?
- מה קורה כשמשחררים קצה של קו על גוף הצורה ולא על נקודת חיבור?
הצגת התשובות
למה ללחוץ Esc לפני מקש כלי כמו A או O?
כשצורה בחורה, אותיות מוקלדות לתוכה. Esc מנקה את הבחירה, כך שהמקש בוחר את הכלי.
איפה בוחרים את סוג הקו ואת ראשי החצים שלו לפני השרטוט?
בסרגל אפשרויות הקו, שנפתח מעל הלוח כשבוחרים כלי קו או חץ.
מה קורה כשמשחררים קצה של קו על גוף הצורה ולא על נקודת חיבור?
הקצה צף: הוא מתחבר לצד הקרוב ביותר ונע סביב הצורה כשהצורות זזות.
קריאה נוספת
תמליל
הצגת התמליל (הקריינות ומה שמוצג על המסך)
Introduction
Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.
In this chapter you create the board, draw and label shapes, and connect them with lines.
A new whiteboard
Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.
On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.
The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.
On screen: The editor: toolbar, Shapes panel, board, inspector.
Shapes and text
Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.
On screen: Rectangle tool → drag on the board.
To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.
On screen: Enter → Rental Kiosk → Esc.
Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.
On screen: Plus handle below → Docking Bay.
The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.
On screen: Shapes panel → search: cloud → Cloud.
Drag the cloud to the right of the kiosk, and type Back Office.
On screen: Drag the cloud right → Back Office.
Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.
On screen: O → drag → Rider.
Lines and arrows
Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.
On screen: A → the Line options bar.
Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.
On screen: Drag Rental Kiosk → Back Office.
An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.
On screen: Drag Back Office down.
For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.
On screen: A → Elbow → drag Docking Bay → Back Office.
Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.
On screen: Line section in the inspector.
Recap
To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.
In the next chapter, you shape a curved line and place labels on it.