Holarch
Розділи курсів

Навчання · Курс 13. Дошки · Розділ 13.1 з 4

13.1 Фігури та лінії 3:15

Створіть дошку, намалюйте фігури, введіть у них текст і з’єднайте їх лініями й стрілками.

Показано Holarch 2.35.

Усі розділи · 13.2 Криві та підписи ліній →

Що ви дізнаєтеся

  • Створити дошку в проєкті
  • Малювати фігури інструментами панелі, клавішами й через панель «Фігури»
  • Вводити текст у фігуру й додавати з’єднані копії маркерами з плюсом
  • З’єднувати фігури стрілками й ламаними лініями, обраними на панелі параметрів лінії

Почніть аркуш концепції для Bike-Share Dock: створіть дошку, намалюйте фігури інструментами панелі та через панель «Фігури», введіть у них текст, додайте з’єднані копії маркерами з плюсом і з’єднайте фігури стрілками й ламаними лініями, тип, наконечники й стиль яких ви обираєте на панелі параметрів лінії перед малюванням.

Файли проєкту

  • Початковий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)
  • Готовий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)

Відео відтворюється з holarch.app; див. Політику конфіденційності.

Практика

Виконайте це самі в Holarch на Bike-Share Dock.

  1. Відкрийте початковий файл розділу або будь-який власний проєкт і відкрийте Планування → Дошки. Натисніть + Нова дошка і назвіть її Dock Concept.
  2. Натисніть інструмент «Прямокутник» і перетягніть, щоб намалювати блок. Натисніть Введення, введіть Rental Kiosk і натисніть Esc.
  3. Коли блок вибрано, натисніть маркер із плюсом під ним і введіть Docking Bay.
  4. На панелі Фігури знайдіть cloud, натисніть її, перетягніть праворуч і введіть Back Office. Натисніть O, намалюйте еліпс ліворуч і введіть Rider.
  5. Натисніть Esc, потім A. Перетягніть від кіоску до бек-офісу. Знову натисніть A, оберіть Ламана на панелі параметрів лінії й проведіть лінію від док-станції до бек-офісу.
  6. Перемістіть бек-офіс і подивіться, як обидві лінії рухаються за ним.

Завдання виконано, коли на аркуші є чотири підписані фігури, стрілка й ламана лінія, і обидві лінії залишаються прикріпленими, коли ви переміщуєте фігуру.

Перевірте себе

  1. Навіщо натискати Esc перед клавішею інструмента, як-от A чи O?
  2. Де обрати тип лінії й наконечники стрілок до того, як її намалювати?
  3. Що відбувається, коли ви відпускаєте кінець лінії на тілі фігури, а не на точці з’єднання?
Показати відповіді
  1. Навіщо натискати Esc перед клавішею інструмента, як-от A чи O?

    Коли фігуру вибрано, літери вводяться в неї. Esc знімає виділення, тож клавіша вибирає інструмент.

  2. Де обрати тип лінії й наконечники стрілок до того, як її намалювати?

    На панелі параметрів лінії, яка відкривається над аркушем, коли ви обираєте інструмент лінії чи стрілки.

  3. Що відбувається, коли ви відпускаєте кінець лінії на тілі фігури, а не на точці з’єднання?

    Кінець стає плаваючим: він прикріплюється до найближчої сторони й переміщується навколо фігури, коли фігури рухаються.

Докладніше

Стенограма

Показати стенограму (озвучення і те, що на екрані)

Introduction

Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.

In this chapter you create the board, draw and label shapes, and connect them with lines.

A new whiteboard

Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.

On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.

The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.

On screen: The editor: toolbar, Shapes panel, board, inspector.

Shapes and text

Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.

On screen: Rectangle tool → drag on the board.

To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.

On screen: Enter → Rental Kiosk → Esc.

Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.

On screen: Plus handle below → Docking Bay.

The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.

On screen: Shapes panel → search: cloud → Cloud.

Drag the cloud to the right of the kiosk, and type Back Office.

On screen: Drag the cloud right → Back Office.

Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.

On screen: O → drag → Rider.

Lines and arrows

Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.

On screen: A → the Line options bar.

Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.

On screen: Drag Rental Kiosk → Back Office.

An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.

On screen: Drag Back Office down.

For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.

On screen: A → Elbow → drag Docking Bay → Back Office.

Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.

On screen: Line section in the inspector.

Recap

To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.

In the next chapter, you shape a curved line and place labels on it.