Holarch
과정의 장

교육 · 트랙 1. 시작하기 · 1.6장 (전체 8장)

1.6 항목 찾기 2:37

검색하고, 필터링하고, 뷰를 저장하고, Command K로 이동하고, 항목의 이력을 읽습니다.

Holarch 1.27 화면입니다.

← 1.5 문서 · 모든 장 · 1.7 공유와 역할 →

학습 내용

  • 입력하는 대로 이름, 번호 또는 설명으로 데이터베이스 검색하기
  • + 필터로 클래스와 속성 값으로 필터링하기
  • 쿼리를 프로젝트와 공유하는 뷰로 저장하기
  • ⌘K / Ctrl+K로 항목과 페이지를 열고 명령 실행하기
  • 항목의 변경 이력 읽기

Bike-Share Dock 모델에서 무엇이든 찾습니다. 입력하는 대로 데이터베이스를 검색하고, 클래스와 속성으로 필터링하고, 관계가 없는 항목을 찾고, 프로젝트 전체를 위해 뷰를 저장하고, Command K로 항목, 페이지, 작업으로 이동하고, 항목의 이력을 읽습니다.

프로젝트 파일

  • 시작 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)
  • 완성 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)

동영상은 holarch.app에서 재생됩니다. 개인정보 처리방침을 참조하십시오.

실습

CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.

  1. EO-1 데모 프로젝트를 여십시오(또는 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)).
  2. 데이터베이스에서 검색 상자에 downlink를 입력하고 결과가 어떤 클래스에서 나오는지 읽습니다. 검색을 지웁니다.
  3. + 필터를 클릭하고 클래스 Requirement를 선택한 다음, Requirement 속성 아래의 상태, = is, In Review를 선택하고 필터 추가를 클릭합니다.
  4. 뷰 창에서 뷰 저장…을 클릭하고, 이름을 Awaiting decision으로 지정하고, 프로젝트와 공유를 선택한 다음 저장을 클릭합니다.
  5. ⌘K / Ctrl+K를 누르고 TC-09를 입력하여 Safe Mode Entry Test를 엽니다. 다시 ⌘K / Ctrl+K를 누르고 rvtm을 입력하여 RVTM 페이지를 엽니다. 그런 다음 new test를 입력하고 아무것도 만들지 않은 채 Escape 키를 누릅니다.
  6. 항목 보기에서 3.1 Orbit Average Power를 열고 이력…을 클릭합니다. 어떤 필드가 바뀌었고 누가 바꿨는지 읽습니다.

Awaiting decision이 공유 표시와 함께 뷰 창에 나타나고 In Review 요구사항만 나열하면 완료입니다.

스스로 확인

  1. 동료가 매주 아직 검토 중인 요구사항이 무엇인지 묻습니다. 그 목록을 가장 빨리 주는 방법은 무엇입니까?
  2. 관계 없음 필터는 무엇을 찾으며, 왜 유용합니까?
  3. 프로젝트와 공유 없이 저장한 뷰는 누가 볼 수 있습니까?
답 보기
  1. 동료가 매주 아직 검토 중인 요구사항이 무엇인지 묻습니다. 그 목록을 가장 빨리 주는 방법은 무엇입니까?

    프로젝트와 공유를 선택해 쿼리를 뷰로 저장합니다. 프로젝트의 모든 사람이 뷰 창에서 이를 받으며, 뷰는 항상 현재 모델을 반영합니다.

  2. 관계 없음 필터는 무엇을 찾으며, 왜 유용합니까?

    연결이 전혀 없는 항목입니다. 예를 들어 아무것도 추적하지 않는 니즈나 아무것도 충족하지 않는 요구사항입니다. 이것들이 모델의 마무리되지 않은 부분입니다.

  3. 프로젝트와 공유 없이 저장한 뷰는 누가 볼 수 있습니까?

    이 브라우저의 본인만 볼 수 있습니다. 뷰는 브라우저에 저장되며 그 브라우저에서 여는 모든 프로젝트에 제시됩니다.

더 읽어 보기

대본

대본 보기 (내레이션과 화면 내용)

Introduction

Chapter six: finding things. A model grows quickly, and a few tools let you find any item in seconds.

We use the Bike-Share Dock project as it stands after the last chapter.

Search and filter

Open the Database, and type in the search box. The table filters as you type, and the search covers names, numbers and descriptions. Searching for bike finds every item that mentions bikes.

On screen: Database → search: bike.

Click Clear. To narrow by kind, click Filter and choose a class, here Requirement. Each filter shows as a chip next to the search.

On screen: Clear → + Filter → Class: Requirement.

With a class chosen, the menu also lists that class's attributes. Choose Status, then is Draft, and click Add Filter. These are the requirements nobody has reviewed yet: all of them, so far.

On screen: Requirement attributes → Status = Draft → Add Filter.

Loose ends and saved views

Click Clear again. Then click Filter, and choose No relationships. It lists items that have no relationships at all: statements no requirement traces to yet, and requirements nothing satisfies. These are the loose ends to work on next.

On screen: Clear → + Filter → No relationships.

A query you will use again can be saved as a view. Click Save View, and name it Loose ends. Tick Share with project, so everyone on the project gets it in the Views pane.

On screen: Save View… → Loose ends → Share with project → Save.

Command K

Command K is the fastest way to anything. Press it, or click Search in the top bar, and type pay. Items are found by name or number.

On screen: Search → pay.

Press Enter, and Take Payment opens in the Entity View.

On screen: Enter → Take Payment.

Command K also finds pages. Type trace, and choose the Traceability Matrix page.

On screen: Search → trace → Traceability Matrix.

And it runs actions. Type new req, and New Requirement is offered. Press Escape to close it without creating anything.

On screen: Search → new req → Escape.

History

Every item keeps its history. Open Rental Kiosk with Command K, and click History. Each change is listed with who made it and when, including the rename from Kiosk in chapter four.

On screen: Search → Rental Kiosk → Enter → History…

Recap

Close the history. Let's recap: you searched as you typed, filtered by class and attribute, found loose ends, saved a view for the project, used Command K for items, pages and actions, and read an item's history.

On screen: Close → Recap card.

Next, you share the project with others and decide what each person may do.