Holarch
과정의 장

교육 · 트랙 1. 시작하기 · 1.4장 (전체 8장)

1.4 첫 다이어그램 4:00

모델을 그리고, 다이어그램에서 모델에 추가하고, 모든 뷰에서 하나의 모델을 확인합니다.

Holarch 1.27 화면입니다.

← 1.3 속성과 관계 · 모든 장 · 1.5 문서 →

학습 내용

  • + 새 다이어그램으로 시스템의 Asset 다이어그램 만들기
  • 다이어그램에 각 부품이 수행하는 기능 표시하기
  • 다이어그램에서 부품과 Conduit을 추가하고 데이터베이스에서 찾기
  • 다이어그램 유형을 전환하여 같은 항목을 계층으로 보기
  • 요구사항 하나 주변의 추적을 보여 주는 Spider 다이어그램 만들기

기존 시스템 항목으로 Bike-Share Dock의 Asset 다이어그램을 만듭니다. Holarch가 관계로부터 부품과 그 기능을 그립니다. 외부 백오피스와 Conduit, 새 부품과 전원 케이블을 추가하고, 다이어그램에서 부품 이름을 바꿔 데이터베이스에서 변경을 확인한 다음, 같은 항목을 계층으로 보고 Spider 다이어그램으로 요구사항을 추적합니다.

프로젝트 파일

  • 시작 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)
  • 완성 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)

동영상은 holarch.app에서 재생됩니다. 개인정보 처리방침을 참조하십시오.

실습

CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.

  1. EO-1 데모 프로젝트를 여십시오(또는 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)).
  2. 레일 아래쪽의 다이어그램을 클릭한 다음 + 새 다이어그램을 클릭합니다. Asset 다이어그램을 선택하고, 다이어그램 대상에 EPS를 입력하여 1.3 EPS를 고른 다음 만들기를 클릭합니다. 수행하는 Action을 켜서 각 부품이 어떤 기능을 수행하는지 봅니다.
  3. + Asset ▾ → 새 하위 Asset…을 선택하고 Battery Heater를 만듭니다. 다이어그램 도구 모음에서 ⋯(추가 작업)를 클릭한 다음 + Conduit을 클릭합니다. Battery Pack에서 Battery Heater로, 이름은 Heater Power Line입니다. 그런 다음 정렬 ▾ → 레이아웃 정리를 선택합니다.
  4. 데이터베이스를 열고 Battery Heater와 Heater Power Line을 새 행으로 찾습니다.
  5. 다이어그램 탭으로 돌아가 유형 선택기로 유형을 계층 다이어그램으로 전환합니다.
  6. 3.2 Battery Capacity의 Spider 다이어그램을 만들고 수준은 2로 유지합니다.

3.2의 Spider 다이어그램에 3.2를 충족하는 Battery Pack과 3.2를 검증하는 TC-07 Battery Capacity Test가 표시되면 완료입니다.

스스로 확인

  1. 아무것도 삭제하지 않고 다이어그램에서 부품의 이름만 바꿉니다. 새 이름은 또 어디에 나타납니까?
  2. 1.3 EPS의 새 Asset 다이어그램에 이미 부품 세 개가 표시되는 이유는 무엇입니까?
  3. Spider 다이어그램이 Asset 다이어그램보다 유용한 때는 언제입니까?
답 보기
  1. 아무것도 삭제하지 않고 다이어그램에서 부품의 이름만 바꿉니다. 새 이름은 또 어디에 나타납니까?

    항목이 나타나는 모든 곳입니다. 데이터베이스, 문서, 다른 다이어그램, 속성 패널입니다. 다이어그램은 별도의 그림이 아니라 모델의 뷰입니다.

  2. 1.3 EPS의 새 Asset 다이어그램에 이미 부품 세 개가 표시되는 이유는 무엇입니까?

    다이어그램은 모델에 이미 있는 decomposed by 관계를 읽으므로, 부품이 수동 배치 없이 그려집니다.

  3. Spider 다이어그램이 Asset 다이어그램보다 유용한 때는 언제입니까?

    여러 관계 유형에 걸쳐 한 항목 주변의 추적을 보고 싶을 때입니다. 예를 들어 변경의 영향을 판단하기 위해 니즈, 기능, 부품, 테스트를 볼 때입니다.

더 읽어 보기

대본

대본 보기 (내레이션과 화면 내용)

Introduction

Chapter four: your first diagram. In Holarch a diagram is a view of the model. It draws items and relationships that already exist, and whatever you add on a diagram goes into the model.

We continue with the Bike-Share Dock, whose parts and functions we related in the last chapter.

Create a diagram

Open Diagrams at the bottom of the rail. It lists every diagram in the project. None is saved yet, but Holarch already offers derived views of the dock, because the dock has parts.

On screen: Diagrams page: derived views only.

Click New Diagram, and pick the type. An Asset Diagram shows a system and its parts.

On screen: + New Diagram → Asset Diagram.

Then choose the root, the item the diagram is about. Type the first letters of Bike-Share Dock, pick it, and click Create.

On screen: Root: S.0 Bike-Share Dock → Create.

Holarch draws the dock with the three parts you related in the last chapter. Nothing was drawn by hand: the diagram reads the decomposed by relationships.

On screen: The asset diagram.

Check Performed Actions, and each part lists the functions it performs. That is the allocation from the last chapter, now on the picture.

On screen: Performed Actions.

Add to the model on the diagram

The back office service is outside the dock, but the kiosk talks to it. Click Asset, choose Existing Asset Outside the Root, and pick Back Office Service. It appears outside the dock's border.

On screen: + Asset ▾ → Existing Asset Outside the Root… → S.4.

A conduit is a physical or data link between assets. Click Conduit, connect the kiosk to the back office service, name the link Cellular Data Link, and click Create.

On screen: + Conduit → Kiosk → Back Office Service → Cellular Data Link.

The Arrange menu tidies the picture. Click Arrange, then Tidy Layout.

On screen: Arrange ▾ → Tidy Layout.

New parts can be added on the diagram too. Click Asset, choose New Child Asset, and create the dock's power supply.

On screen: + Asset ▾ → New Child Asset… → S.5 Power Supply.

Connect it to the charging unit with a second conduit, the Power Cable, and lay the diagram out again.

On screen: + Conduit → Power Supply → Charging Unit → Power Cable; Tidy Layout.

One model, many views

Now select the kiosk. The inspector shows the same item you created in the Database. Rename it Rental Kiosk.

On screen: Select Kiosk → inspector → Rental Kiosk.

Open the Database. The kiosk is renamed there too, and the power supply and both conduits are new rows. There is only one model, and the diagram is one view of it.

On screen: Database: Rental Kiosk, Power Supply, conduits.

The same items can be drawn in other ways. Go back to the diagram's tab, and switch its type at the top to Hierarchy Diagram: the dock's breakdown as a tree.

On screen: Back to the diagram → type: Hierarchy Diagram.

A spider diagram follows the links outward from one item. On the Diagrams page, click New Diagram, choose Spider Diagram, and make the requirement Unlock a Bike its root.

On screen: Diagrams → + New Diagram → Spider → root 1.1.

Set the level to two. It shows the requirement, the need it traces to, the function that satisfies it, and the part that performs that function: the traceability you built, on one page.

On screen: Level 2.

Every diagram can be exported with Export: as a picture, a Word document, a web page or a print, for a report or a review.

On screen: Export… dialog.

Recap

Let's recap. You created an asset diagram from the dock, saw its parts and functions drawn from the model, added an external system, a part and two conduits, renamed a part on the diagram, and viewed the same items as a hierarchy and a spider diagram.

Next, you write a requirements document whose requirements are items of this same model.