과정의 장
교육 · 트랙 3. 동작과 아키텍처 · 3.1장 (전체 6장)
3.1 기능과 FFBD 3:52
기능에 최상위 기능을 지정한 다음, 흐름을 텍스트로 작성하여 FFBD를 얻습니다.
Holarch 1.27 화면입니다.
학습 내용
- 기능 분석 페이지에서 최상위 기능 선택하기
- decomposed by 관계로 기능을 하위 기능으로 분해하기
- 화살표, AND, LOOP로 기능 흐름을 텍스트로 작성하기
- Holarch가 흐름으로 그린 FFBD를 읽고 하위 기능 자체의 FFBD 열기
기능 분석 페이지에서 Bike-Share Dock의 기능을 최상위 기능 아래에 정리하고, 기능을 추가하고, 화살표, AND, LOOP로 기능 흐름을 텍스트 한 줄로 작성한 다음, Holarch가 이를 바탕으로 기능 흐름 블록 다이어그램(FFBD)을 그리게 합니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 열거나 만드십시오. 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering).
- 데이터베이스에서 F9 Transmit Payload Data를 선택합니다. 추적 섹션에서 decomposed by 옆의 +를 클릭하고(목록에 없으면 모든 관계 표시를 선택), 새 Action…을 선택하여
Enable Transmitter,Send Data File,Confirm Receipt,Disable Transmitter,Report Pass Summary를 만듭니다. - 동작 → 기능 분석을 열고 최상위 기능 옆의 선택…을 클릭하여 F9 Transmit Payload Data를 고릅니다. 기능 탭에 다섯 개의 하위 기능이 나열됩니다.
- 흐름 및 FFBD에서 텍스트로 편집…을 클릭하고
"Enable Transmitter" -> LOOP[return="next file"]("Send Data File" -> "Confirm Receipt") -> AND("Disable Transmitter" | "Report Pass Summary")를 입력한 다음 적용을 클릭합니다. - FFBD 열기를 클릭하고 되돌아가는 화살표가 있는 루프와 AND 게이트를 찾습니다. 그런 다음 최상위 기능으로 다시 F0 Perform EO-1 Mission을 선택하고, FFBD를 열어 F9를 더블클릭하면 F9 자체의 FFBD가 열립니다.
- 검사가 포함된 단계별 실습은 튜토리얼 4 Functional Analysis(도움말 → 튜토리얼)를 실행하십시오.
F9의 FFBD에 Enable Transmitter, next file 레이블의 되돌아가는 화살표가 있는 Send Data File과 Confirm Receipt의 루프, 두 분기가 있는 AND가 표시되면 완료입니다.
스스로 확인
- 기능 분석 페이지에 최상위 기능이 필요한 이유는 무엇입니까?
- 흐름에서 AND와 OR의 차이는 무엇입니까?
- 텍스트 흐름에서 빠뜨린 기능은 어떻게 됩니까?
- 흐름 및 FFBD 탭에서 흐름을 바꿉니다. FFBD는 어떻게 됩니까?
답 보기
기능 분석 페이지에 최상위 기능이 필요한 이유는 무엇입니까?
이 페이지는 하나의 Action을 기준으로 동작합니다. 그 Action의 decomposed by 하위 항목이 페이지가 나열하고, 흐름을 잇고, 그리는 기능입니다. F9 같은 다른 최상위 기능을 선택하면 그 기능 자체의 분해가 표시됩니다.
흐름에서 AND와 OR의 차이는 무엇입니까?
AND는 모든 분기를 병렬로 실행하며, 모든 분기가 끝나면 흐름이 계속됩니다. OR는 분기 중 정확히 하나를 택합니다.
텍스트 흐름에서 빠뜨린 기능은 어떻게 됩니까?
Holarch는 그 기능을 텍스트에서 빠진 것으로 표시하고 흐름의 마지막 요소 뒤에 추가하므로, 어떤 기능도 사라지지 않습니다.
흐름 및 FFBD 탭에서 흐름을 바꿉니다. FFBD는 어떻게 됩니까?
다시 그려집니다. FFBD, 기능 트리, 기능 표는 모두 같은 모델을 읽으므로 수동으로 갱신할 것이 없습니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Welcome to Behavior and Architecture. This track models what the Bike-Share Dock does, what it is made of, how its parts connect, and whether the design adds up.
This first chapter is about functions, and the order they run in.
Functions and their flow
A function is something the system must do, named with a verb: rent a bike, take a payment. A functional flow block diagram, the F F B D, shows the order the functions run in, which ones run at the same time, and which ones repeat.
On screen: Card: functions and the FFBD.
A top-level function
Open Behavior, then Functional Analysis. The page works from one top-level function, and the dock has none yet. The four functions from Getting Started stand on their own.
On screen: Behavior → Functional Analysis: no top-level function.
Click Choose, then Create New. The top-level function is the whole job of the system: Operate the Bike-Share Dock, numbered F zero.
On screen: Choose… → Create New… → F.0 Operate the Bike-Share Dock.
Now put the four functions under it. Open the Database, select Operate the Bike-Share Dock, and in its Trace section, link Rent a Bike, Return a Bike, Charge Bikes and Take Payment under decomposed by.
On screen: Database → F.0 → decomposed by → F.1–F.4.
One function is missing: the dock reports its status, the free bays and the charge levels, to the back office. Create a new Action, F five, Report Dock Status.
On screen: New Entity: Action F.5 Report Dock Status.
Place it in the hierarchy from the other side: show all relations in its Trace section, and under decomposes, link it to Operate the Bike-Share Dock.
On screen: F.5 → decomposes → F.0.
Back in Functional Analysis, the Functions tab lists all five under the top-level function.
On screen: Functional Analysis → Functions.
The flow as text
Open Flow and FFBD. Until someone writes the flow, it simply lists the functions in number order, which says nothing about how they work together.
On screen: Flow & FFBD tab.
Choose Edit as Text. A flow is written like a sentence: function numbers joined by arrows, in the order they run. A rider pays, takes the bike, and later returns it: F four, arrow, F one, arrow, F two.
On screen: Edit as Text → F.4 -> F.1 -> F.2.
After a return, two things happen at the same time: the bike charges, and the dock reports its status. AND opens parallel branches, separated by a bar. Both start together, and the flow goes on when both are done.
On screen: -> AND(F.3 | F.5).
The whole cycle repeats for the next rider. LOOP repeats what is inside its brackets, and return names the arrow that goes back. Wrap the flow in a loop.
On screen: LOOP[return="next rider"]( … ).
The FFBD
The preview below draws the diagram as you type. Apply it.
On screen: Preview → Apply.
Holarch draws the F F B D from that one line: a numbered box for each function, a circle where the AND branches open and close, and the loop with the return arrow labeled next rider.
On screen: The FFBD.
The diagram, the hierarchy and the functions table all read the same model. Change the flow, and the diagram follows.
On screen: The FFBD.
Recap
Let's recap. You created a top-level function, placed the dock's functions under it, wrote their flow as text with arrows, AND and LOOP, and got the F F B D drawn from it.
Next, you take one function apart, step by step, on an action diagram.