Holarch
과정의 장

교육 · 트랙 14. 스프레드시트 · 14.4장 (전체 5장)

14.4 차트와 모델 데이터 2:47

범위를 차트로 만들어 축 서식을 지정하고, 실시간 모델 표를 삽입하고, SUMIFS와 HOLARCH.VALUE로 모델 값을 읽습니다.

Holarch 2.35 화면입니다.

학습 내용

  • 범위를 차트로 만들고 차트를 데이터 옆으로 옮기기
  • 축 서식에서 축 범위와 단위 설정하기
  • 실시간 모델 데이터가 담긴 모델 표 삽입하기
  • SUMIFS로 모델 값을 합산하고 HOLARCH.VALUE로 값 하나 읽기
  • 모델 변경이 시트와 차트에 반영되는 것 확인하기

EO-1 질량 예산을 차트로 만들고 모델에 연결합니다. 서브시스템 질량의 세로 막대 차트를 삽입하고 축 서식에서 값 축을 설정하고, 번호와 질량이 있는 모든 Asset의 읽기 전용 실시간 모델 표를 삽입하고, 입력해 둔 추정치를 표에 대한 SUMIFS로 바꾸고, HOLARCH.VALUE로 모델에서 질량 할당을 읽은 다음, 모델에서 질량 하나를 바꿔 예산이 따라 바뀌는 것을 확인합니다.

프로젝트 파일

  • 시작 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)
  • 완성 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)

동영상은 holarch.app에서 재생됩니다. 개인정보 처리방침을 참조하십시오.

실습

CubeSat EO-1에서 Holarch로 직접 해 보십시오.

  1. 이 장의 시작 파일 또는 14.3장에서 만든 통합 문서를 엽니다.
  2. B2:C8을 선택하고 차트를 연 다음 세로 막대를 선택합니다. 차트를 예산 오른쪽으로 끌어다 놓습니다.
  3. 차트를 마우스 오른쪽 버튼으로 클릭하고 세로 축 서식을 선택한 다음, 최댓값을 5, 주 단위를 1로 설정합니다.
  4. Model이라는 시트를 추가합니다. A1에서 모델 표를 클릭하고 클래스 Asset을 선택한 다음 Number와 Mass를 선택하고, 이름을 Parts로 지정하고 삽입을 클릭합니다.
  5. Budget 시트의 C3에 =SUMIFS(Parts[Mass],Parts[Number],A3&"*")를 입력하고 C8까지 아래로 채웁니다. Assumptions 시트의 B1에 =HOLARCH.VALUE("Spacecraft Mass","Threshold Value","kg")를 입력합니다.
  6. 데이터베이스에서 Payload Camera의 질량을 2.4kg에서 2.9kg으로 바꾼 다음 스프레드시트로 돌아갑니다.

질량이 모델에서 오고, 할당 값이 모델에서 읽은 12로 표시되고, 합계, 여유, 차트가 Payload Camera 변경을 따라가면 완료입니다.

스스로 확인

  1. 스프레드시트가 모델을 변경할 수 있습니까?
  2. SUMIFS 조건에서 A3&"*"는 무엇과 일치합니까?
  3. 차트 축의 최댓값과 주 단위는 어디에서 설정합니까?
답 보기
  1. 스프레드시트가 모델을 변경할 수 있습니까?

    아니요. 모델 표와 HOLARCH 함수는 모델을 읽기만 하며, 스프레드시트가 모델에 쓰는 일은 없습니다.

  2. SUMIFS 조건에서 A3&"*"는 무엇과 일치합니까?

    서브시스템 번호로 시작하는 모든 부품 번호입니다. 예를 들어 1.1에는 1.1.1과 1.1.2가 해당합니다.

  3. 차트 축의 최댓값과 주 단위는 어디에서 설정합니까?

    차트의 마우스 오른쪽 버튼 메뉴에서 여는 축 서식에서 설정합니다. 상자를 비워 두면 값이 자동으로 유지됩니다.

더 읽어 보기

대본

대본 보기 (내레이션과 화면 내용)

Introduction

Chapter four: charts and model data. A chart shows the budget at a glance. And a spreadsheet can read the model, so the budget stays current without retyping.

In this chapter you chart the budget, then feed it from the model.

Charts

Select the subsystems and their masses, B2 to C8. Open Chart, and choose Column.

On screen: Name Box B2:C8 → Chart ▾ → Column.

The chart floats over the sheet. Drag it to the right of the budget, so the totals stay in view.

On screen: Drag the chart right of column E.

The chart follows its cells. Right-click it for its menu, and choose Format Vertical Axis.

On screen: Right-click the chart → Format Vertical Axis….

Format Axis sets the bounds and units. Set the maximum to five and the major unit to one. Leave a box empty to keep it automatic. Close the panel.

On screen: Maximum 5, Major 1 → close.

Model data

The masses so far are typed estimates. The model holds the current mass of every component, so read them from there. Add a sheet, and name it Model.

On screen: + → Model.

Select A1, and click Model Table. Choose the class Asset, tick Number and Mass, name the table Parts, and click Insert.

On screen: A1 → Model Table… → Class Asset; Number, Mass; name Parts → Insert.

The table lists every asset with its number and mass, live and read-only. A spreadsheet reads the model, and never writes to it.

On screen: The Parts table.

Back in the budget, replace the estimate in C3. The SUMIFS function adds the masses of the parts whose number starts with the subsystem's number.

On screen: Budget → C3: =SUMIFS(Parts[Mass],Parts[Number],A3&"*") ↵.

Fill it down to C8. Every subsystem now adds up its components from the model.

On screen: Name Box C3:C8 → Fill ▾ → Fill Down.

HOLARCH.VALUE reads one value of one item, in the unit you ask for. On the Assumptions sheet, the allocation becomes the threshold of the spacecraft mass measure in the model.

On screen: Assumptions → B1: =HOLARCH.VALUE("Spacecraft Mass","Threshold Value","kg") ↵.

The sheet follows the model

Now change the model. In the Database, open the payload camera's mass, and change it from two point four to two point nine kilograms.

On screen: Database → Payload Camera → Mass 2.4 → 2.9.

Back in the spreadsheet, with its editor tab. The payload camera's mass, the totals, the margin and the chart have all followed, with no edit to the sheet.

On screen: Editor tab → Budget: 2.90 kg, totals, margin, chart.

Recap

To recap: chart a range and format its axis, insert a Model Table for live model data, sum it with SUMIFS, and read single values with HOLARCH.VALUE.

In the last chapter, you import an Excel workbook and get AI help with formulas.