Holarch
과정의 장

교육 · 트랙 2. 요구사항과 검증 · 2.2장 (전체 6장)

2.2 니즈에서 요구사항으로 추적 2:07

각 요구사항을 그 출처인 니즈나 제약 조건까지 추적하고, 누락을 찾습니다.

Holarch 1.27 화면입니다.

학습 내용

  • 속성 패널에서 요구사항을 그 출처인 니즈로 추적하기
  • 행 쿼리와 열 쿼리로 추적성 매트릭스 만들기
  • 매트릭스의 셀을 클릭해 추적 연결 만들기
  • 공백만으로 추적되지 않은 요구사항을 찾고 각 누락의 해결 방법 정하기

Bike-Share Dock의 요구사항을 그 출처인 이해관계자 니즈와 제약 조건으로 추적합니다. 속성 패널에서 연결 하나를, 두 쿼리로 만든 추적성 매트릭스에서 여러 연결을 만든 다음, 누락을 봅니다. 출처가 없는 요구사항은 빠진 니즈나 아무도 요청하지 않은 요구사항을 가리킵니다.

프로젝트 파일

  • 시작 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)
  • 완성 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)

동영상은 holarch.app에서 재생됩니다. 개인정보 처리방침을 참조하십시오.

실습

CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.

  1. EO-1 데모 프로젝트를 여십시오(또는 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)).
  2. 데이터베이스에서 1.6.2 Off-Nadir Imaging을 선택합니다. 추적의 traced from에서(목록에 없으면 모든 관계 표시를 선택) + → 기존 항목 연결…을 클릭하고 N2 Twice-Weekly Revisit를 선택한 다음 선택 항목 연결을 클릭합니다.
  3. 검증 → 추적성 매트릭스를 엽니다. 행을 쿼리 class:Requirement에서, 열을 쿼리 number:N*에서 가져오도록 설정하고, 관계 traced from을 선택합니다.
  4. N2 Twice-Weekly Revisit 아래의 1.5 Daily Collection Volume 빈 셀을 클릭합니다. 일일 수집량이 재방문을 가능하게 하기 때문입니다.
  5. 공백만을 선택합니다. 1.7 Mission Lifetime에 대해 빠진 니즈를 추가합니다. 다음으로 비어 있는 N 번호(예: N4)로 Statement Two Growing Seasons를 만든 다음, 매트릭스에서 1.7에 연결합니다.
  6. 검사가 포함된 단계별 실습은 튜토리얼 3 Trace Requirements(도움말 → 튜토리얼)를 실행하십시오.

공백만을 선택했을 때 1.5, 1.6.2, 1.7이 더 이상 나타나지 않으면 완료입니다.

스스로 확인

  1. 니즈를 요구사항으로 추적하면 어떤 세 가지 질문에 답할 수 있습니까?
  2. 공백만에 출처가 없는 요구사항이 표시됩니다. 가장 가까운 니즈에 연결하는 것이 항상 올바른 해결책입니까?
  3. 연결할 때 추적성 매트릭스가 속성 패널보다 나은 때는 언제입니까?
답 보기
  1. 니즈를 요구사항으로 추적하면 어떤 세 가지 질문에 답할 수 있습니까?

    요구사항이 왜 존재하는지, 모든 니즈가 요구사항으로 다뤄지는지, 니즈가 바뀌면 어떤 요구사항이 바뀌는지입니다.

  2. 공백만에 출처가 없는 요구사항이 표시됩니다. 가장 가까운 니즈에 연결하는 것이 항상 올바른 해결책입니까?

    아닙니다. 니즈가 빠져 있어 추가해야 하거나, 요구사항이 필요 없어 삭제해야 합니다. 누락을 메우려고만 만든 연결은 문제를 감춥니다.

  3. 연결할 때 추적성 매트릭스가 속성 패널보다 나은 때는 언제입니까?

    두 항목 집합 사이에 연결을 많이 만들 때입니다. 전체 격자를 보고, 한 번의 클릭으로 각 연결을 만들고, 누락을 한눈에 볼 수 있습니다.

더 읽어 보기

대본

대본 보기 (내레이션과 화면 내용)

Introduction

Chapter two: tracing needs to requirements. Every requirement should come from somewhere: a stakeholder need, a constraint, or a higher requirement. Tracing records where.

We trace the Bike-Share Dock's requirements to its needs and constraints.

Why trace

Tracing answers three questions. Why does this requirement exist? Is every need covered by a requirement? And when a need changes, which requirements change with it?

On screen: Card: why trace.

One link

One link at a time works in the inspector. In the Database, select Show Available Bikes. In its Trace section, add a traced from link to the need Find a Bike Nearby.

On screen: 4.1.1 → Trace → traced from + → Link existing… → N.1.

Many links

For many links, use the Traceability Matrix. Open Verification, then Traceability Matrix. Click Rows, and set them from a query: every requirement.

On screen: Verification → Traceability Matrix → Rows → Query → class:Requirement.

Set the columns from a query too: the needs and constraints, whose numbers start with N and C. Then choose the relationship, traced from.

On screen: Columns → Query → number:N.* OR number:C.* → Relationship: traced from.

Each click on an empty cell creates a link. Detect a Returned Bike comes from the operator's need to return bikes without staff. The two design constraints, the footprint and the anchoring, come from the sidewalk constraint.

On screen: Click three cells.

Find the gaps

Now look for gaps. Check Gaps only: the matrix keeps the requirements that are traced to nothing in the columns.

On screen: Gaps only.

Each gap is a question for the team. Either a need is missing, such as the rider's need to pay quickly, or the requirement is not needed. Add the missing need, or delete the requirement, but do not leave it untraced.

On screen: The gaps.

Recap

Let's recap. You traced one requirement in the inspector, built a Traceability Matrix from two queries, created links with a click, and found the requirements that still have no source.

Next, open items and approvals.