과정의 장
교육 · 트랙 6. Holarch로 마이그레이션 · 6.2장 (전체 5장)
6.2 Excel 및 CSV의 요구사항 2:32
요구사항 스프레드시트를 계층, 레이블, 속성과 함께 문서로 가져옵니다.
Holarch 2.21 화면입니다.
학습 내용
- 머리글 행, 개요 번호, 클래스 열이 있는 스프레드시트 준비하기
- 스프레드시트를 가져오고 매핑 단계에서 모든 열의 Holarch 필드 확인하기
- 가져온 행으로 요구사항 문서 만들기
- 계층, 레이블, 상태가 파일에서 들어왔는지 확인하기
Excel에서 Plant Inspection Drone의 요구사항 추적표를 가져옵니다. 시트를 준비하고, 가져오기를 요구사항 문서로 구성하고, 각 열이 필드, 속성 또는 레이블에 어떻게 매핑되는지 확인하고, 미리 보고, 저장하고, 모델에서 번호가 매겨진 계층, 레이블, 상태를 확인합니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 여십시오(없으면 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)). 데이터베이스에서
class:Requirement를 검색하고 내보내기…를 클릭한 다음, 표 (CSV)를 선택하고 상태와 우선순위를 선택한 채(레이블은 선택 유지) 내보내기를 클릭합니다. - 스프레드시트 앱에서 파일을 엽니다. 머리글과 섹션 1, 2의 행은 남기고, 맨 위에 두 행을 추가합니다.
1,Mission Imaging, 클래스Statement, 그리고2,Attitude Determination and Control, 클래스Statement입니다. .xlsx 또는 .csv로 저장합니다. - 프로젝트 관리에서 + 새 프로젝트를 클릭하고 이름을
EO-1 Import Practice로 지정한 다음 프로젝트 만들기를 클릭합니다. - 니즈 및 요구사항 → 가져오기 및 내보내기를 열고 파일을 놓은 다음 계속을 클릭하고, 각 열의 Holarch 필드를 확인합니다(원하지 않는 열은 건너뛰기로 설정).
- 계속을 클릭하고 이 N개 항목으로 문서 만들기를 선택한 채 N개 항목 가져오기를 클릭합니다.
- 새 문서에서 1.6.1과 1.6.2가 1.6 아래에 있는지 확인하고, 1.5를 선택하여 레이블과 상태를 봅니다.
새 문서에 섹션 1과 2가 표시되고, 요구사항이 번호에 따라 중첩되어 있으며 레이블과 상태가 그대로이면 완료입니다.
스스로 확인
- Holarch는 스프레드시트 행의 계층을 어떻게 다시 만듭니까?
- 일부 행이 잘못된 클래스로 들어왔습니다. 왜 그렇습니까?
- 기존 요구사항 50개의 담당자를 사본을 만들지 않고 스프레드시트로 갱신하려고 합니다. 어떻게 합니까?
답 보기
Holarch는 스프레드시트 행의 계층을 어떻게 다시 만듭니까?
상위 행 ID나 상위 번호 열이 매핑되어 있으면 그것으로, 아니면 개요 번호로 만듭니다. 1.2는 1 아래로 갑니다. 상위 항목이 없으면 가장 가까운 기존 조상을 사용합니다.
일부 행이 잘못된 클래스로 들어왔습니다. 왜 그렇습니까?
스키마가 모르는 이름이 있는 클래스 열은 경고와 함께 클래스가 없는 행의 클래스로 대체됩니다. 스키마 편집기의 클래스 이름을 사용하십시오.
기존 요구사항 50개의 담당자를 사본을 만들지 않고 스프레드시트로 갱신하려고 합니다. 어떻게 합니까?
ID 열과 함께 내보내고, 파일을 편집한 다음, ID 열을 전역 ID에 매핑하고 기존 항목 대조 기준을 전역 ID로 설정해 가져옵니다. 그러면 검토 단계가 이 항목들을 업데이트된 항목 아래에 나열합니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter two: requirements from Excel and CSV. Spreadsheets are where most requirements live before a model exists, and they come in with their hierarchy and their columns intact.
We import the Plant Inspection Drone's requirements tracker into the project from the last chapter.
Prepare the spreadsheet
Here is the tracker. It has a header row, and outline numbers that give the hierarchy: 1, then 1.1 and 1.2 under it. A Class column says which rows are section headings and which are requirements, and further columns hold labels, priority and status.
On screen: The spreadsheet.
Choose the file
Open Needs and Requirements, then Import and Export. One page takes every format: Excel, CSV, Word, ReqIF and more. Holarch detects the format from the file.
On screen: Needs & Requirements → Import and Export: one page for every format.
Drop the file on the drop zone. Holarch reads it, and reports how many rows and columns it found.
On screen: Drop the file → Analyzed.
Map the columns
Click Continue. Map lists each column, its sample values, and the Holarch field it goes to. Columns whose titles match a field or an attribute are mapped already: Number, Name and Description, Class, Labels, and the Priority and Status attributes.
On screen: Continue → Map.
Check every column before you go on. A column you do not want is set to Skip, and a field with no home in the schema can become a new attribute.
On screen: The mapping table.
Review and import
Click Continue to review. Holarch offers to make the rows a requirements document, and lists each new item before anything is created.
On screen: Continue → Review.
Click Import. The whole import is one undo step, so if something looks wrong, Command Z takes it all back.
On screen: Import 12 items → the new document opens.
With no warnings, the new document opens at once. The outline has the three sections from the sheet, and the requirements are numbered under them, just as they were in the tracker.
On screen: The imported document.
Check the result
Select a requirement. Its labels and its status came in from the sheet's columns, so the model already knows which requirements are in review and which are performance requirements.
On screen: Select 1.1 → inspector: Labels, then Workflow (Status).
Recap
Let's recap. You prepared the spreadsheet, imported it as a requirements document, checked the column mapping, reviewed and imported it, and found its hierarchy, labels and statuses in the model.
Next, a Word specification and a supplier's ReqIF file.