Holarch
과정의 장

교육 · 트랙 2. 요구사항과 검증 · 2.6장 (전체 6장)

2.6 RVTM과 VCRM 2:29

RVTM에서 검증 커버리지를 읽고, 명세서와 Word에 실시간 VCRM을 넣습니다.

Holarch 1.27 화면입니다.

학습 내용

  • RVTM 카드에서 검증 커버리지를 읽고 한 상태로 필터링하기
  • RVTM과 VCRM의 차이 설명하기
  • RVTM을 Excel로 내보내기
  • 명세서에 실시간 검증 매트릭스를 삽입하고 매트릭스를 Word로 내보내기

Bike-Share Dock의 검증을 보고합니다. 커버리지 카드와 필터가 있는 RVTM 페이지, Excel 내보내기, 명세서의 검증 섹션에 삽입한 실시간 VCRM, 그리고 같은 매트릭스의 Word 내보내기를 다룹니다.

프로젝트 파일

  • 시작 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)
  • 완성 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)

동영상은 holarch.app에서 재생됩니다. 개인정보 처리방침을 참조하십시오.

실습

CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.

  1. EO-1 데모 프로젝트를 여십시오(또는 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)).
  2. 검증 → RVTM을 엽니다. 불합격 카드를 클릭하고 불합격한 테스트 TC-04와 TC-09가 어떤 요구사항을 검증하는지 적어 둡니다. 칩을 클릭해 필터를 지웁니다.
  3. 표를 VCRM으로 전환하고 어느 방법 열에도 X가 없는 요구사항을 찾습니다.
  4. 내보내기 ▾ → Excel(.xlsx)을 클릭하고 파일을 엽니다.
  5. EO-1 System Requirements Specification을 열고 섹션 5 Communications를 선택한 다음 작성 ▾ → 삽입 ▸ → 매트릭스…를 선택합니다. 검증 수준별 VCRM을 선택하고 범위를 이 문서로 유지한 채 삽입을 클릭합니다.
  6. 납품 ▾ → 추적성 매트릭스…를 선택하고 RVTM을 고른 다음, 내보내기 형식에서 Matrix (Word)를 선택하고, 모델을 SRR Baseline으로 설정한 다음 내보내기를 클릭합니다.

명세서에 수준별 실시간 VCRM이 표시되고, 제목에 SRR Baseline이 들어간 Word RVTM이 있으면 완료입니다.

스스로 확인

  1. 각 요구사항을 어떻게 검증할지는 어느 매트릭스가 답하고, 검증되었는지는 어느 매트릭스가 답합니까?
  2. 명세서에 표를 붙여 넣지 않고 매트릭스를 실시간 콘텐츠로 삽입하는 이유는 무엇입니까?
  3. 서명된 납품물에 베이스라인에서 매트릭스를 내보내는 이유는 무엇입니까?
답 보기
  1. 각 요구사항을 어떻게 검증할지는 어느 매트릭스가 답하고, 검증되었는지는 어느 매트릭스가 답합니까?

    VCRM은 요구사항별로 계획된 방법을 보여 줍니다. RVTM은 방법, 각 요구사항을 검증하는 테스트, 그 결과를 보여 줍니다.

  2. 명세서에 표를 붙여 넣지 않고 매트릭스를 실시간 콘텐츠로 삽입하는 이유는 무엇입니까?

    실시간 매트릭스는 모델로 만들어집니다. 방법이 바뀌거나 테스트가 합격하면 매트릭스와 문서의 모든 내보내기가 함께 바뀝니다.

  3. 서명된 납품물에 베이스라인에서 매트릭스를 내보내는 이유는 무엇입니까?

    서명된 문서는 오늘의 모델이 아니라 합의 당시의 모델을 보여 줘야 합니다. 베이스라인에서 나온 매트릭스는 그 베이스라인의 항목과 관계를 사용합니다.

더 읽어 보기

대본

대본 보기 (내레이션과 화면 내용)

Introduction

Chapter six: the RVTM and the VCRM. These two matrices answer the question every review asks: how will each requirement be verified, and has it been?

This is the last chapter of Requirements and Verification.

The matrices

The RVTM lists each requirement with its method, its level, the tests that verify it and their result. The VCRM is a cross-reference: a column per method, with a mark where that method is planned. Both are built from the model, so they are always current.

On screen: Card: RVTM and VCRM.

The RVTM page

Open Verification, then RVTM. The cards count the requirements by status: one verified, one with a method planned but no test yet, and seven with nothing planned.

On screen: Verification → RVTM.

Click Unverified to list only those seven. They are the work still to plan: each needs a method, and a test or another way to show it is met.

On screen: Unverified card.

Export sends the matrix to Excel, with gaps shaded red, for anyone outside the model.

On screen: Export ▾ → Excel (.xlsx).

A live VCRM in the specification

A specification usually carries its own verification matrix. Open the specification, and select section 11.1, Verification Matrix. Open Write, then Insert, and choose Matrix.

On screen: SRS → 11.1 → Write ▾ → Insert → Matrix…

Choose the Verification Cross-Reference Matrix, keep the scope on this document, and check the preview. Click Insert.

On screen: VCRM → Insert.

The matrix is now part of the section. It is live: when a test passes or a method changes, the matrix in the specification changes with it, and so does every export.

On screen: The VCRM in the document.

Export

To send it on its own, open Deliver, choose Traceability Matrix, pick the VCRM and Word, and click Export. In Word the method columns are narrow, with a legend, and gaps are shaded.

On screen: Deliver ▾ → Traceability Matrix… → VCRM, Matrix (Word) → Export.

Recap

Let's recap. You read verification coverage on the RVTM page, filtered the unverified requirements, exported to Excel, put a live VCRM in the specification, and exported it to Word.

That completes Requirements and Verification. You can now write and check requirements, trace them, take them through review and change, verify them, and report coverage.

On screen: Track complete card, then end card.