Holarch
課程章節

培訓 · 第 13 單元:白板 · 第 13.1 章,共 4 章

13.1 形狀與線條 3:15

建立白板、繪製形狀、在其中輸入文字,並以線條與箭頭將它們連接起來。

展示 Holarch 2.35。

您將學到

  • 在專案中建立白板
  • 以工具列工具、按鍵與「形狀」面板繪製形狀
  • 在形狀中輸入文字,並以加號控點新增已連接的複本
  • 以在線條選項列中選擇的箭頭與肘形線連接形狀

為 Bike-Share Dock 開始一個概念畫板:建立白板、以工具列工具與「形狀」面板繪製形狀、在其中輸入文字、以加號控點新增已連接的複本,並以箭頭與肘形線連接形狀,其類型、箭頭與樣式在繪製前於線條選項列中選擇。

專案檔案

  • 起始專案 (.holarch.json;管理專案 → 專案檔案 ▾ → 匯入專案 (.json)…)
  • 完成的專案 (.holarch.json;管理專案 → 專案檔案 ▾ → 匯入專案 (.json)…)

影片從 holarch.app 播放;請參閱隱私權政策。

練習

在 Holarch 中於 Bike-Share Dock 上親自操作。

  1. 開啟本章的起始檔案或您自己的任何專案,然後開啟計畫 → 白板。按一下 + 新增白板,並將它命名為 Dock Concept。
  2. 按一下矩形工具並拖曳出一個方塊。按 輸入,輸入 Rental Kiosk,然後按 Esc。
  3. 在方塊仍選取時,按一下其下方的加號控點,並輸入 Docking Bay。
  4. 在形狀面板中搜尋 cloud,按一下它,將它拖曳到右側並輸入 Back Office。按 O,在左側畫一個橢圓並輸入 Rider。
  5. 按 Esc,再按 A。從服務亭拖曳到後台辦公室。再按一次 A,在線條選項列中選擇肘形,然後從停車區畫到後台辦公室。
  6. 移動後台辦公室,看兩條線都跟著移動。

當畫板上有四個加了標籤的形狀、一個箭頭與一條肘形線,且移動形狀時兩條線都保持連接,即完成。

自我檢查

  1. 為什麼要在按 A 或 O 這類工具鍵之前先按 Esc?
  2. 在繪製線條之前,要在哪裡選擇線條的類型與箭頭?
  3. 如果將線條的端點放在形狀的本體上,而不是連接點上,會發生什麼事?
顯示答案
  1. 為什麼要在按 A 或 O 這類工具鍵之前先按 Esc?

    選取形狀時,輸入的字母會打進形狀中。Esc 會清除選取,讓按鍵改為選擇工具。

  2. 在繪製線條之前,要在哪裡選擇線條的類型與箭頭?

    在線條選項列中;當您挑選線條或箭頭工具時,它會在畫板上方開啟。

  3. 如果將線條的端點放在形狀的本體上,而不是連接點上,會發生什麼事?

    端點會浮動:它會連接到最近的一側,並在形狀移動時繞著形狀移動。

延伸閱讀

文字稿

顯示文字稿 (旁白與畫面內容)

Introduction

Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.

In this chapter you create the board, draw and label shapes, and connect them with lines.

A new whiteboard

Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.

On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.

The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.

On screen: The editor: toolbar, Shapes panel, board, inspector.

Shapes and text

Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.

On screen: Rectangle tool → drag on the board.

To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.

On screen: Enter → Rental Kiosk → Esc.

Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.

On screen: Plus handle below → Docking Bay.

The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.

On screen: Shapes panel → search: cloud → Cloud.

Drag the cloud to the right of the kiosk, and type Back Office.

On screen: Drag the cloud right → Back Office.

Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.

On screen: O → drag → Rider.

Lines and arrows

Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.

On screen: A → the Line options bar.

Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.

On screen: Drag Rental Kiosk → Back Office.

An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.

On screen: Drag Back Office down.

For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.

On screen: A → Elbow → drag Docking Bay → Back Office.

Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.

On screen: Line section in the inspector.

Recap

To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.

In the next chapter, you shape a curved line and place labels on it.