과정의 장
교육 · 트랙 13. 화이트보드 · 13.3장 (전체 4장)
13.3 차트 3:32
차트를 삽입하고, 데이터를 입력하고, 유형을 바꾸고, 데이터를 선택하고, 축 서식을 지정하고, Excel에서 차트를 가져옵니다.
Holarch 2.35 화면입니다.
학습 내용
- 차트를 삽입하고 차트 데이터에 직접 입력하거나 붙여넣거나 파일에서 가져오기
- 누적형과 100% 누적형을 포함해 차트 유형 바꾸기
- 데이터 선택에서 행과 열을 전환하고 계열 순서 정하기
- 차트 요소를 켜고 축 서식에서 축 범위와 단위 설정하기
- Excel 통합 문서에서 차트 가져오기
Bike-Share Dock 콘셉트 화이트보드에 사용량 차트 보드를 추가합니다. 세로 막대 차트를 삽입하고, 데이터를 편집하고, Excel 시트에서 대여 수치를 가져오고, 차트 유형 변경 갤러리에서 누적 세로 막대 차트로 바꾸고(100% 누적, 가로 막대, 꺾은선, 원형, 도넛, 분산형 미리 보기 포함), 데이터 선택에서 계열의 순서를 바꾸고 전환하고, 차트 요소에서 데이터 레이블을 켜고 범례를 옮기고, 축 서식에서 값 축의 범위와 단위를 설정하고, Excel에서 차트 가져오기로 꺾은선 차트와 원형 차트를 Excel 통합 문서에서 가져옵니다.
실습
Bike-Share Dock에서 Holarch로 직접 해 보십시오.
- 이 장의 시작 파일과 Dock Concept 화이트보드를 엽니다. 보드 스트립에서 +를 클릭합니다.
- 표 및 차트를 열고 세로 막대를 클릭합니다. 차트를 두 번 클릭하고 파일에서 가져오기…를 클릭한 다음, 레이블 열 하나와 숫자 열 두 개가 있는 통합 문서를 직접 준비해 선택합니다.
- 차트를 마우스 오른쪽 버튼으로 클릭 → 차트 유형 변경… → 누적 세로 막대 → 확인을 선택합니다.
- 차트 섹션에서 데이터 선택…을 클릭하고, 행/열 전환을 두 번 시도하고, 계열 하나를 위로 옮긴 다음 확인을 클릭합니다.
- 데이터 레이블을 선택하고, 범례를 위쪽으로 설정하고, 값 축을 클릭해 최댓값과 주 단위를 설정합니다.
- Excel에서 차트 가져오기…를 클릭하고 차트가 있는 통합 문서에서 차트를 삽입합니다.
보드에 데이터 레이블, 위쪽 범례, 고정된 축 범위가 있는 누적 세로 막대 차트와 Excel에서 가져온 차트 하나가 있으면 완료입니다.
스스로 확인
- 100% 누적 차트가 누적 차트보다 나은 경우는 언제입니까?
- 행/열 전환은 무엇을 합니까?
- 축 범위를 설정한 뒤 다시 자동으로 되돌리려면 어떻게 합니까?
답 보기
100% 누적 차트가 누적 차트보다 나은 경우는 언제입니까?
합계보다 비율이 중요할 때입니다. 각 막대가 전체 높이를 채우고, 구간이 각 계열이 차지하는 부분을 보여 줍니다.
행/열 전환은 무엇을 합니까?
계열과 항목을 맞바꿉니다. 행이 계열이 되고 열이 항목이 되거나, 그 반대가 됩니다.
축 범위를 설정한 뒤 다시 자동으로 되돌리려면 어떻게 합니까?
축 서식에서 상자를 비웁니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter three: charts. A whiteboard chart draws its own data, which you type, paste or import, and you format it the way you would in a spreadsheet.
In this chapter you build a board of usage charts for the dock.
A chart and its data
The charts get a board of their own. Click the plus in the Boards strip under the board: the new board opens as a second tab.
On screen: Boards strip → +.
Open the Tables and Charts panel, and click Column. The chart is added in the middle of the view, with sample data.
On screen: Tables and Charts panel → Column.
Double-click the chart to open Chart Data. Labels go in the first column and series names in the first row. You can type in the grid, add rows and series, or paste rows copied from a spreadsheet.
On screen: Double-click the chart → Chart Data.
Our rental figures are in a workbook. Click Import from File, and choose Dock Usage.
On screen: Import from File… → Dock Usage.xlsx.
The workbook has three sheets. Choose Rentals. The preview shows six months and two series, weekday and weekend. Click Use Imported Data, then Done.
On screen: Sheet: Rentals → Use Imported Data → Done.
Chart types
Right-click the chart, and choose Change Chart Type. The gallery shows your own data in every type.
On screen: Right-click → Change Chart Type….
Stacked column stacks each month's series, so the bar shows the total. One hundred percent stacked compares the shares. Bar turns the chart on its side, and line, pie, donut and scatter are here too.
On screen: Gallery: Stacked Column, 100% Stacked Column, Bar, Line, Pie, Donut, Scatter.
Choose Stacked Column, and click OK.
On screen: Stacked Column → OK.
Select Data
Select Data, in the Chart section, chooses what the chart shows. Switch Row and Column turns the months into the series and the series into the categories. Switch it back.
On screen: Chart section → Select Data… → Switch Row/Column, twice.
Legend entries lists the series. Select Weekend, and click Move Up: weekend now sits at the bottom of each stack, and keeps its color. Click OK.
On screen: Weekend → Move Up → OK.
Format the chart
Chart Elements turns the parts of the chart on and off. Tick Data labels, and set the legend position to Top.
On screen: Chart Elements → Data labels; Legend position: Top.
Click the numbers of the value axis to select the axis. A dashed box marks it, and the inspector shows Format Axis.
On screen: Click the value axis.
Set the maximum to three thousand, and the major unit to five hundred. Leave a box empty for automatic. Every change is one undo step.
On screen: Format Axis: Maximum 3000, Major 500.
Import charts from Excel
Charts made in Excel come in too. In the Tables and Charts panel, click Import Chart from Excel, and choose the workbook.
On screen: Import Chart from Excel… → Dock Usage.xlsx.
The dialog lists every chart in the workbook, with a preview, its sheet, its type and its series, and says what does not carry over. Tick the line chart and the pie chart, and click Insert.
On screen: Tick the line and pie charts → Insert 2 Charts.
They arrive selected, as whiteboard charts with their titles, colors and axes. Drag them below the first chart. You edit and format them like the one you made.
On screen: Drag the imported charts below the column chart.
Recap
To recap: insert a chart from the Tables and Charts panel, give it data in Chart Data, choose its type in the gallery, set its series in Select Data, format it with Chart Elements and Format Axis, and import charts from Excel.
In the next chapter, you link charts and tables to live spreadsheet cells, connect the board to the model and add clipart.