과정의 장
교육 · 트랙 6. Holarch로 마이그레이션 · 6.3장 (전체 5장)
6.3 Word 및 ReqIF의 요구사항 2:22
Word 명세서를 문서로 가져오고, 공급업체의 ReqIF 파일을 계층 및 연결과 함께 가져옵니다.
Holarch 2.21 화면입니다.
학습 내용
- Word 파일의 어느 부분이 섹션이 되고 어느 부분이 요구사항이 되는지 설명하기
- Word 명세서를 번호가 매겨진 요구사항 문서로 가져오기
- 계층, 속성, 관계와 함께 ReqIF 파일 가져오기
- 추적 섹션에서 가져온 관계 확인하기
Word에서 Plant Inspection Drone의 페이로드 명세서를 가져오고(제목은 섹션, shall 문장은 요구사항이 됨), ReqIF에서 배터리 공급업체의 요구사항을 계층, 속성, refines 관계와 함께 가져옵니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 여십시오(없으면 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)). 문서 → EO-1 System Requirements Specification을 열고 납품 ▾ → 사양 (Word)을 클릭합니다.
- 같은 문서에서 납품 ▾ → 요구사항 (ReqIF)…를 클릭하고 내보내기를 클릭합니다.
- 프로젝트 관리에서 + 새 프로젝트를 클릭하고 이름을
EO-1 Import Practice로 지정한 다음 프로젝트 만들기를 클릭합니다. 니즈 및 요구사항 → 가져오기 및 내보내기를 열고 .docx를 놓은 다음 계속을 두 번 클릭하고 가져옵니다. - 새 문서를 SRS와 비교합니다. 어떤 제목이 Statement가 되었고 어떤 shall 문장이 Requirement가 되었는지, 그리고 이름이 어떻게 지어졌는지 확인합니다.
- 같은 프로젝트에 .reqif 파일을 가져온 다음, 만들어진 문서를 열고 1.6 Revisit Time을 선택하여 하위 항목과 레이블을 확인합니다.
프로젝트에 Word에서 온 문서와 ReqIF에서 온 문서 두 개가 있고, 어느 쪽이 원래 이름과 번호를 유지했는지 말할 수 있으면 완료입니다.
스스로 확인
- Word 가져오기는 무엇을 섹션으로, 무엇을 요구사항으로 읽습니까?
- 공급업체는 Word나 ReqIF를 보낼 수 있습니다. ReqIF를 요청하는 이유는 무엇입니까?
- ReqIF 관계에 Holarch가 모르는 이름이 있습니다. 어떻게 됩니까?
답 보기
Word 가져오기는 무엇을 섹션으로, 무엇을 요구사항으로 읽습니까?
Word 제목 스타일의 단락은 Statement(섹션)가 됩니다. shall, must, will 또는 should가 있는 단락은 Requirement가 되며, 동사 뒤의 처음 몇 단어로 이름이 지어집니다. 일반 굵은 텍스트로 입력한 제목은 보통 텍스트로 읽힙니다.
공급업체는 Word나 ReqIF를 보낼 수 있습니다. ReqIF를 요청하는 이유는 무엇입니까?
ReqIF는 각 요구사항의 식별자, 계층, 속성, 관계를 담습니다. 공급업체가 새 파일을 보내면 가져오기가 사본을 추가하는 대신 같은 항목을 갱신합니다.
ReqIF 관계에 Holarch가 모르는 이름이 있습니다. 어떻게 됩니까?
traced to로 들어옵니다. 스키마가 두 클래스 사이에 traced to를 허용하지 않으면 경고와 함께 그 관계를 건너뜁니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter three: requirements from Word and ReqIF. Many specifications live in Word, and many suppliers exchange requirements as ReqIF files. Both come in through the same Import and Export page.
We import the payload specification and the battery supplier's requirements into the Plant Inspection Drone project.
Word
The Word file uses heading styles for its sections, and plain sentences with shall for its requirements. That is what the Word import reads. Heading styles or Word's list numbering matter: headings typed as ordinary bold text are read as ordinary text.
On screen: Card: what Holarch reads in Word.
Open Import and Export, and drop the file. Holarch detects Word from the file and analyzes it.
On screen: Import and Export → drop the .docx → Word detected.
Click Continue. The numbering pattern stays automatic, which uses numbered headings and shall sentences. Click Continue for the review: Holarch creates a requirements document with the name of the file, and lists the sections and the requirements under them.
On screen: Continue → Map: numbering → Continue → Review.
Click Import. The document opens, numbered from the Word headings, with each shall sentence as a requirement you can now trace and check.
On screen: Import → the document.
ReqIF
Now the supplier's file. ReqIF is the standard exchange format between requirements tools. Open Import and Export again, and drop the file.
On screen: Import and Export → drop the .reqif → ReqIF detected.
Click Continue. Each requirement in the file is a row. Its ReqIF identifier and its parent rebuild the hierarchy, its type becomes the class, and its attributes map by name: the chapter name to the number, the name, and the text to the description.
On screen: Continue → Map.
Click Continue, check the review, and click Import.
On screen: Continue → Review → Import.
Check the result
The supplier's relations come in as relationships. Select Charge Time, and open Trace: it refines Pack Capacity, just as the file says.
On screen: Select B.4 Charge Time → Trace.
Recap
Let's recap. You imported a Word specification, where headings became sections and shall sentences requirements, and a supplier's ReqIF file, with its hierarchy, attributes and relations.
Next, a whole model from another tool.