Holarch
과정의 장

교육 · 트랙 5. 팀과 관리 · 5.2장 (전체 6장)

5.2 역할, 검토자, 승인 1:56

각 사람에게 알맞은 역할을 주고, 무료 검토자와 함께 요구사항을 승인합니다.

Holarch 1.7 화면입니다.

학습 내용

  • 각 사람에게 알맞은 프로젝트 역할(소유자, 편집자, 검토자, 뷰어) 고르기
  • 공유 대화 상자에서 검토자를 초대하고 구성원의 역할 바꾸기
  • 승인 페이지에서 요구사항을 승인, 거부, 다시 열기
  • 요구사항의 텍스트가 바뀌면 승인에 어떤 일이 생기는지 설명하기

팀의 프로젝트 역할: 소유자, 편집자, 검토자, 뷰어. 무료 검토자 초대, 구성원의 역할 변경, 그리고 요구사항의 검토 흐름인 검토 중, 승인 페이지, 승인, 거부, 다시 열기와 누가 언제 승인했는지를 다룹니다.

프로젝트 파일

  • 시작 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)

동영상은 holarch.app에서 재생됩니다. 개인정보 처리방침을 참조하십시오.

실습

CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.

  1. EO-1 데모 프로젝트를 여십시오(없으면 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)). 공유를 클릭하고 두 번째 이메일 주소를 검토자로 초대한 다음 초대를 클릭합니다.
  2. 요구사항 2.4 Target Slew(상태 Draft)를 선택하고 속성 패널의 워크플로 그룹에서 상태를 In Review로 설정합니다.
  3. 니즈 및 요구사항 → 승인을 열고 2.4를 클릭한 다음 승인을 클릭합니다. 그런 다음 3.4 Bus Regulation을 클릭하고 거부…를 클릭한 다음 이유 Name the source of the 2% tolerance를 입력합니다.
  4. 2.4 Target Slew의 설명을 편집하여 60 seconds를 45 seconds로 바꿉니다.
  5. 승인을 다시 열고 3.4 Bus Regulation에서 다시 열기를 클릭합니다.

2.4 Target Slew가 승인 후 텍스트 변경됨 메모와 함께 승인 목록에 돌아오고, 3.4 Bus Regulation이 다시 검토 중이면 완료입니다.

스스로 확인

  1. 요구사항을 승인하는 사람을 편집자가 아니라 검토자로 초대하는 이유는 무엇입니까?
  2. 누군가 승인된 요구사항의 설명을 편집하면 어떻게 됩니까?
  3. 프로그램에서는 승인된 요구사항이 바뀌기 전에 지정된 승인자 세 명과 변경 위원회가 필요합니다. 승인 버튼으로 충분합니까?
답 보기
  1. 요구사항을 승인하는 사람을 편집자가 아니라 검토자로 초대하는 이유는 무엇입니까?

    검토자는 모델을 편집할 수 없는 상태로 요구사항을 읽고, 댓글을 달고, 승인하거나 거부합니다. 검토자는 모든 요금제에서 무료이며 프로젝트의 편집자 한도에 포함되지 않습니다.

  2. 누군가 승인된 요구사항의 설명을 편집하면 어떻게 됩니까?

    승인 후 텍스트 변경됨 메모와 함께 검토 중으로 돌아가므로, 승인은 항상 승인된 문구와 일치합니다. 다른 속성을 바꾸면 다시 열리지 않습니다.

  3. 프로그램에서는 승인된 요구사항이 바뀌기 전에 지정된 승인자 세 명과 변경 위원회가 필요합니다. 승인 버튼으로 충분합니까?

    아닙니다. 승인은 요구사항의 상태에 대한 결정 하나를 기록합니다. 필수 승인자, 변경 위원회와 그 규칙은 변경 요청에 속하며, 이러한 승인 규칙은 Team 요금제의 일부입니다.

더 읽어 보기

대본

대본 보기 (내레이션과 화면 내용)

Introduction

Chapter two: roles, reviewers and approvals. Organizations group people, but each project still decides what each person may do in it.

Roles

Every project member has one of four roles.

On screen: Roles card.

Invite a reviewer

Open Share. Invite the quality lead as a Reviewer. Reviewers cost nothing on any plan, so everyone who signs off on requirements can be one.

On screen: Share → email → Reviewer → Invite.

Roles can change later: an owner picks a different role next to the person's name, and the change applies at once. Click Done.

On screen: Members list → Done.

Approve a requirement

Reviewers work on requirements whose status is In Review. Open Needs and Requirements, then Approvals. It lists every requirement waiting for a decision. Here, Flight Endurance.

On screen: Needs & Requirements → Approvals.

Select it. The inspector shows the requirement and the decision buttons: Approve, Reject, or Reopen. Click Approve.

On screen: Select Flight Endurance → Approve.

Holarch records who approved it and when, and the status becomes Approved. If someone later changes the requirement's text, it goes back to In Review automatically, so an approval always matches the words that were approved.

On screen: Approved by, date; status Approved.

Reject asks for an optional reason, which is shown with the decision. Reopen sends an approved or rejected requirement back for review.

On screen: Reject and Reopen.

Recap

Let's recap. Each project member has one role: owner, editor, reviewer or viewer. Reviewers and viewers are free. Requirements in review are listed on the Approvals page, and every approval records who and when.

Next, you protect the team's accounts: passkeys, two-step sign-in, and requiring it for the organization.