과정의 장
교육 · 트랙 4. 문서와 산출물 · 4.4장 (전체 5장)
4.4 검토 패키지와 베이스라인 2:35
검토 대상을 고정하고, 이후 무엇이 바뀌었는지 확인하고, 검토자에게 하나의 패키지를 전달합니다.
Holarch 2.41 화면입니다.
학습 내용
- 승인 기록과 함께 문서 베이스라인 저장하기
- 베이스라인을 현재 버전과 비교하고 변경 사항 내보내기
- 검토 요청으로 문서 검토 요청하기
- 여러 문서로 검토 패키지를 만들고 하나의 Word 파일로 내보내기
Bike-Share Dock의 시스템 요구사항 검토를 준비합니다. 명세서를 승인과 함께 베이스라인에 넣고, 요구사항을 변경하여 베이스라인 대비 변경 보고서를 읽은 다음, 명세서와 시스템 엔지니어링 관리 계획서를 합친 검토 패키지를 만듭니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 열거나 만드십시오. 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering). 이 과제는 문서 템플릿 장의 EO-1 Interface Control Document도 사용합니다. 그 장을 건너뛰었다면 먼저 만드십시오.
- EO-1 System Requirements Specification을 열고 문서 유형 옆의 검토 요청을 클릭한 다음, 아무도 선택하지 않은 채 검토 요청을 클릭합니다. 제목 아래의 띠에 검토가 표시됩니다.
- 버전 ▾ → 베이스라인 저장…을 클릭하고 이름을
PDR Baseline으로 지정한 다음, 역할을 입력하고 + 승인자 추가를 클릭해 두 번째 승인자를 추가하고 만들기를 클릭합니다. - 2.4 Target Slew를 45초로 바꿉니다. 그런 다음 버전 ▾ → 버전 비교…를 선택하고 From을 PDR Baseline으로, To를 현재 버전으로 설정한 다음 변경 사항 (Excel)을 클릭합니다.
- 통제 및 검토 → 검토를 열고 + 새 검토 패키지를 클릭하여 이름을
PDR review package로 지정합니다. 작성 ▾ → 삽입 ▸ 문서…를 두 번 선택하여 SRS와 ICD를 추가합니다. - 납품 ▾ → 납품물 설정…을 선택하고 SRS 파트의 각 파트를 내보낼 출처를 PDR Baseline으로 설정한 다음, 납품 ▾ → 사양 (Word)을 선택합니다.
변경 보고서에 2.4 편집이 나열되고, 패키지의 Word 파일에 Part A와 Part B가 있으며 SRS 파트가 PDR Baseline에서 왔다면 완료입니다.
스스로 확인
- 문서 베이스라인에는 무엇이 담기며, 나중에 바뀔 수 있습니까?
- 문서 베이스라인은 프로젝트 베이스라인과 어떻게 다릅니까?
- 패키지는 오늘의 편집이 아니라 베이스라인에 넣은 SRS를 내보내야 합니다. 어떻게 합니까?
- 검토 요청을 클릭한 후 검토는 어떻게 됩니까?
답 보기
문서 베이스라인에는 무엇이 담기며, 나중에 바뀔 수 있습니까?
문서의 읽기 전용 스냅샷입니다. 문서의 항목, 그 속성과 관계, 그리고 관계 하나 떨어진 항목이 담깁니다. 이름을 바꾸고 승인을 추가할 수는 있지만 기존 승인 기록은 편집할 수 없습니다.
문서 베이스라인은 프로젝트 베이스라인과 어떻게 다릅니까?
문서 베이스라인은 문서 하나를 담으며 문서의 버전 ▾에서 저장합니다. 프로젝트 베이스라인은 프로젝트의 모든 항목을 담으며 통제 및 검토 → 베이스라인 및 버전에서 + 베이스라인 저장…으로 저장합니다.
패키지는 오늘의 편집이 아니라 베이스라인에 넣은 SRS를 내보내야 합니다. 어떻게 합니까?
패키지의 납품물 설정…에서 각 파트를 내보낼 출처를 그 베이스라인으로 설정합니다. 고정된 파트는 📌와 베이스라인 이름을 표시하며 베이스라인의 내용을 내보냅니다.
검토 요청을 클릭한 후 검토는 어떻게 됩니까?
문서는 검토 중 상태가 됩니다. 프로젝트의 검토자 또는 지정한 사람이 내 작업의 검토할 문서에서 문서를 받아, 그곳이나 제목 아래의 띠에서 승인하거나 거부합니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter four: review packages and baselines. Before a review, you freeze what is being reviewed, and you hand the reviewers one package.
You will baseline a document with its approval, see what changed since the baseline, and build a review package from several documents.
Baseline a document
Open the system requirements. In the version menu at the top of the document, choose Save Baseline.
On screen: Documents → the SRS → Version ▾ → Save Baseline….
Name it SRR Baseline, for the system requirements review. The approval is filled in with your name. Add the role, Lead Systems Engineer. Approval records are dated now and cannot be edited later. Click Create.
On screen: Name, approval role → Create.
The version menu now lists it. A baseline is a read-only snapshot of the document: its items, their attributes and their relationships.
On screen: Version ▾: the baseline.
What changed since
Now a change arrives: the footprint grows shorter. In the outline, open section 10, and change requirement 10.1 to two by eleven meters.
On screen: Outline → 10.1 → edit its description.
Open the version menu, and choose SRR Baseline. Holarch shows the document as it was, read-only, with its approval. Click Compare to Current.
On screen: Version ▾ → SRR Baseline → Compare to Current.
The change report lists every item that changed since the baseline, with the field and the change marked. Reviewers can see exactly what moved, and the report exports to Excel.
On screen: Baseline Change Report.
Build a review package
Now the review package. Open Plan and Deliver, then Review Packages, and click New Review Package. Name it SRR Review Package, and click Create.
On screen: Plan & Deliver → Review Packages → + New Review Package.
A review package is a document that holds other documents. In Write, choose Insert, then Document, and pick the system requirements.
On screen: Write ▾ → Insert → Document… → the SRS.
Insert the systems engineering management plan the same way. Each document keeps its own sections, below it.
On screen: Write ▾ → Insert → Document… → the SEMP.
The package has its own page setup, so it can carry a cover page of its own. From Deliver, choose a Word template, and the whole package becomes one file for the review board.
On screen: Deliver ▾ → Specification (Word).
Recap
Let's recap. You baselined a document with its approval, read what changed since the baseline, and built a review package from two documents.
Next, you present the model to the review board with slides that stay up to date.