과정의 장
교육 · 트랙 3. 동작과 아키텍처 · 3.3장 (전체 6장)
3.3 할당 2:33
도크의 어느 부분이 각 기능을 수행하는지 정하고, 남은 것을 찾습니다.
Holarch 1.27 화면입니다.
학습 내용
- performed by 관계로 액션 대 자산의 추적성 매트릭스 설정하기
- 매트릭스에서 한 번의 클릭으로 기능을 수행하는 자산에 할당하기
- 공백만으로 어떤 자산도 수행하지 않는 액션 찾기
- 항목의 추적 섹션에서 할당 확인하기
Bike-Share Dock의 기능과 Rent a Bike의 단계를 이를 수행하는 부품에 할당합니다. performed by 관계를 사용하는 액션 대 자산 매트릭스에서 할당한 다음, 공백만으로 아직 수행자가 없는 것을 나열합니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 열거나 만드십시오. 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering).
- 검증 → 추적성 매트릭스를 엽니다. 행 칩을 클릭하고 행 출처를 루트 엔터티 아래의 계층으로 설정한 다음 루트로 OPS Run Nominal Imaging Pass를 선택하고 완료를 클릭합니다.
- 열 칩을 클릭하고 열 출처를 클래스 Asset의 클래스의 모든 엔터티로 설정한 다음 관계를 performed by로 설정합니다.
- 공백만을 선택합니다. 루트 OPS와 함께 OPS.9 Hold Data Onboard가 남는데, OPS는 시스템 전체가 수행합니다.
- OPS.9 Hold Data Onboard와 페이로드 데이터를 저장소에 보관하는 부품인 1.4 C&DH가 만나는 셀을 클릭합니다. 그런 다음 데이터베이스에서 OPS.9를 선택하고 추적 섹션의 performed by를 읽습니다.
- 검사가 포함된 단계별 실습은 튜토리얼 6 Physical Architecture and Allocation(도움말 → 튜토리얼)을 실행하십시오.
공백만에 OPS.9가 더 이상 나열되지 않고 추적 섹션에 performed by 1.4 C&DH가 표시되면 완료입니다.
스스로 확인
- 관계를 허용된 모든 항목 대신 performed by로 설정하는 이유는 무엇입니까?
- 할당은 어디에 저장됩니까?
- 공백만에 행이 표시됩니다. 항상 오류입니까?
답 보기
관계를 허용된 모든 항목 대신 performed by로 설정하는 이유는 무엇입니까?
유형을 하나 선택하면 빈 셀을 클릭할 때 정확히 그 관계가 만들어집니다. 허용된 모든 유형을 선택하면 여러 유형이 해당될 때 Holarch가 어느 것을 의미하는지 물어야 합니다.
할당은 어디에 저장됩니까?
항목에, Action에는 performed by로, Asset에는 performs로 저장됩니다. 매트릭스는 이 연결의 뷰일 뿐이므로, 항목의 추적 섹션 같은 다른 뷰도 같은 할당을 보여 줍니다.
공백만에 행이 표시됩니다. 항상 오류입니까?
아닙니다. 최상위 운영이나 기능은 시스템 전체가 수행할 수 있으므로 단일 수행자가 필요하지 않습니다. 남은 각 단계에는 보통 수행자가 하나 필요합니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Welcome back. Functions say what the dock does. Its parts, the assets, say what it is. Allocation joins the two.
In this chapter you allocate every function to the part that performs it.
What allocation is
Each function should be performed by a part of the system. A function nothing performs will not happen, and a part with no function is weight with no job. In the model, allocation is one relationship: performed by.
On screen: Card: allocation.
Set up the matrix
A matrix is the quickest way to allocate many functions at once. Open Verification, then Traceability Matrix.
On screen: Verification → Traceability Matrix.
Click Rows, and choose all entities of the class Action. Set Columns to the class Asset the same way. Then set the relationship to performed by, so a click on a cell creates exactly that.
On screen: Rows → class Action; Columns → class Asset; Relationship: performed by.
Allocate the functions
The top-level functions first. Three were allocated in Getting Started, and the matrix marks them: Rent a Bike by the Rental Kiosk, Return a Bike by the Docking Bay, and Charge Bikes by the Charging Unit.
On screen: Existing marks: F.1, F.2, F.3.
Allocate the other two. Take Payment is performed by the Back Office Service: click the cell where its row and that column meet. Report Dock Status is performed by the kiosk, which talks to the back office.
On screen: F.4 × S.4, F.5 × S.2.
The steps of Rent a Bike from the last chapter need performers too. Identify Rider happens at the kiosk, Check Account in the back office, and Unlock Bay in the docking bay.
On screen: F.1.1 × S.2, F.1.2 × S.4, F.1.3 × S.1.
Find the gaps
Now turn on Gaps only. The matrix keeps only the rows and columns with no link: the steps still to allocate, and the top-level function, which is done by the dock as a whole.
On screen: Gaps only.
The rest follow the same way. Show Bay Number and Start Rental belong to the kiosk and the back office, and Relock Bay to the docking bay.
On screen: F.1.4 × S.2, F.1.6 × S.4, F.1.7 × S.1.
On the item
Allocation is stored on the items, not in the matrix. Select Rent a Bike in the Database, and open its Trace section: performed by lists the Rental Kiosk.
On screen: Database → F.1 → Trace.
Recap
Let's recap. You set up a matrix of actions against assets with performed by, allocated the functions and the steps with one click each, and used Gaps only to find what was left.
Next, you define how the dock's parts connect: interfaces.