과정의 장
교육 · 트랙 7. 프로세스 따르기 · 7.4장 (전체 4장)
7.4 모델에서 기술 검토 진행 2:38
검토의 진입 기준을 확인하고 검토 패키지를 준비합니다.
Holarch 2.13 화면입니다.
학습 내용
- 공식 수명 주기에서 이름이 있는 검토를 찾아 진입 기준 읽기
- 열기 링크로 진입 기준 충족하기
- 검토의 마일스톤과 검토 패키지 추가하기
- 가이드가 보여 주는 것과 검토 위원회가 결정하는 것 설명하기
NASA 프로젝트 수명 주기 가이드로 시스템 요구사항 검토(SRR)를 준비합니다. 핵심 의사 결정 지점, 모델에서 읽은 단계의 검토와 진입 기준, 기준의 열기 링크로 실행하는 품질 검사, 템플릿으로 만드는 시스템 엔지니어링 관리 계획서(SEMP), 그리고 검토의 마일스톤과 패키지를 다룹니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 여십시오(없으면 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)). 계획 → SE 프로세스를 열고 프로세스에서 NASA project life cycle을 선택합니다(또는 목록에서 선택하고 이 프로세스 사용을 클릭).
- Phase B: Preliminary design and technology completion을 클릭하고 PDR의 진입 기준을 읽습니다. 구성 요소로의 할당, 인터페이스, TPM, 완화책, 검증 방법입니다.
- 충족되지 않은 기준 옆의 열기를 클릭하고 작업 하나를 처리합니다. 예를 들어 2.5 Safe Mode Recovery의 Verification Method를 설정합니다.
- SE 프로세스로 돌아가 기준의 개수를 확인합니다.
- PDR 아래에서 게이트 마일스톤 추가와 검토 패키지 만들기를 클릭하고, 패키지를 열어 어떤 문서가 수집되었는지 확인합니다.
PDR에 마일스톤과 검토 패키지가 표시되고, 작업한 기준의 항목 수가 하나 늘면 완료입니다.
스스로 확인
- 검토의 진입 기준이 모두 충족되었습니다. 설계가 준비된 것입니까?
- 진입 기준을 검토 당일이 아니라 검토 전에 읽는 이유는 무엇입니까?
- 기대 사항을 요구사항으로 추적하는 SRR 기준이 아직 열려 있습니다. 이 기준은 무엇을 요구합니까?
답 보기
검토의 진입 기준이 모두 충족되었습니다. 설계가 준비된 것입니까?
반드시 그렇지는 않습니다. 가이드는 모델에 담긴 것을 보여 줄 뿐이며, 설계가 좋은지는 검토 위원회가 결정합니다.
진입 기준을 검토 당일이 아니라 검토 전에 읽는 이유는 무엇입니까?
Holarch가 모델에서 읽으므로, 팀은 아직 작업할 시간이 있을 때 무엇이 빠졌는지 볼 수 있습니다.
기대 사항을 요구사항으로 추적하는 SRR 기준이 아직 열려 있습니다. 이 기준은 무엇을 요구합니까?
니즈(Statement)에서 그 니즈에 답하는 요구사항으로 가는 traced to 연결입니다. 체크할 상자가 아니라 모델링 작업입니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter four: running a technical review from the model. Formal life cycles name their reviews, and each review has entry criteria. Holarch reads the criteria from the model, so the team sees before the review what is ready.
We prepare the System Requirements Review of the Bike-Share Dock, using the NASA project life cycle.
Reviews and entry criteria
Open SE Process, and choose NASA project life cycle in the Process list. The phases run from Pre-Phase A, concept studies, to Phase F, closeout. The diamond on each phase names the key decision point that ends it.
On screen: SE Process → Process ▾ → NASA project life cycle.
Click Phase A, concept and technology development. Its reviews are at the bottom: the System Requirements Review, and the Mission or System Definition Review. Each lists its entry criteria.
On screen: Phase A → Reviews and gates.
Read the SRR's criteria. The system requirements are defined. The requirements have not been quality-checked yet, and there is no systems engineering management plan.
On screen: SRR entry criteria.
Meeting the criteria
Click Open next to the quality criterion. On the Quality page, click the run button to check every requirement. Each one gets a score, and the findings explain what to improve.
On screen: Open → Quality → run the check.
Now the management plan. Go back to SE Process, and click Open next to it. Create a new document of the type Systems Engineering Management Plan Document, from its outline.
On screen: SE Process → Open → + New Document: SEMP.
Back on SE Process, both criteria are met. The one still open, expectations traced to requirements, is real work for the team: it asks for links between the needs and the requirements that answer them.
On screen: SE Process → Phase A: criteria met; tracing still open.
Milestone and package
Click Add Gate Milestone and Create Review Package under the SRR. The package collects the requirements specification and the new management plan for the review board.
On screen: SRR: Add Gate Milestone, Create Review Package.
The guide shows what the model holds. It does not judge whether a design is good: that is the review board's decision. When the review has passed, make the phase current and move on.
On screen: Make Current Phase.
Recap
Let's recap. You switched to the NASA life cycle, read a review's entry criteria, met two of them from their Open links, added the review's milestone and package, and moved the project on.
That completes Track 7. More tracks are at holarch.app slash training.