Capítulos del curso
Formación · Curso 13. Pizarras · Capítulo 13.1 de 4
13.1 Formas y líneas 3:15
Crear una pizarra, dibujar formas, escribir en ellas y conectarlas con líneas y flechas.
Muestra Holarch 2.35.
Lo que aprenderá
- Crear una pizarra en un proyecto
- Dibujar formas con las herramientas de la barra de herramientas, las teclas y el panel Formas
- Escribir texto en una forma y añadir copias conectadas con los controles más
- Conectar formas con flechas y líneas en codo elegidas en la barra de opciones de línea
Empiece una pizarra de concepto para el Bike-Share Dock: cree una pizarra, dibuje formas con las herramientas de la barra de herramientas y el panel Formas, escriba texto en ellas, añada copias conectadas con los controles más y conecte las formas con flechas y líneas en codo cuyo tipo, puntas de flecha y estilo elija en la barra de opciones de línea antes de dibujar.
Archivos de proyecto
- Proyecto inicial (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)
- Proyecto terminado (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)
El vídeo se reproduce desde holarch.app; consulte la Política de privacidad.
Práctica
Hágalo usted mismo en Holarch, en Bike-Share Dock.
- Abra el archivo inicial del capítulo o cualquier proyecto propio y abra Plan → Pizarras. Haga clic en + Nueva pizarra y póngale el nombre
Dock Concept. - Haga clic en la herramienta de rectángulo y arrastre un recuadro. Pulse Intro, escriba
Rental Kiosky pulse Esc. - Con el recuadro seleccionado, haga clic en el control más situado bajo él y escriba
Docking Bay. - En el panel Formas, busque
cloud, haga clic en ella, arrástrela a la derecha y escribaBack Office. Pulse O, dibuje una elipse a la izquierda y escribaRider. - Pulse Esc y después A. Arrastre desde el kiosco hasta Back Office. Pulse A de nuevo, elija Codo en la barra de opciones de línea y dibuje desde Docking Bay hasta Back Office.
- Mueva Back Office y compruebe que ambas líneas lo siguen.
Habrá terminado cuando la pizarra tenga cuatro formas con etiqueta, una flecha y una línea en codo, y ambas líneas sigan unidas al mover una forma.
Compruebe lo aprendido
- ¿Por qué pulsar Esc antes de una tecla de herramienta como A u O?
- ¿Dónde se eligen el tipo de línea y las puntas de flecha antes de dibujarla?
- ¿Qué ocurre al soltar el extremo de una línea sobre el cuerpo de una forma en lugar de sobre un punto de conexión?
Mostrar las respuestas
¿Por qué pulsar Esc antes de una tecla de herramienta como A u O?
Cuando hay una forma seleccionada, las letras se escriben en ella. Esc borra la selección, de modo que la tecla elige la herramienta.
¿Dónde se eligen el tipo de línea y las puntas de flecha antes de dibujarla?
En la barra de opciones de línea, que se abre sobre la pizarra al elegir una herramienta de línea o de flecha.
¿Qué ocurre al soltar el extremo de una línea sobre el cuerpo de una forma en lugar de sobre un punto de conexión?
El extremo flota: se une al lado más cercano y se desplaza alrededor de la forma cuando las formas se mueven.
Más información
Transcripción
Mostrar la transcripción (narración y lo que aparece en pantalla)
Introduction
Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.
In this chapter you create the board, draw and label shapes, and connect them with lines.
A new whiteboard
Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.
On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.
The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.
On screen: The editor: toolbar, Shapes panel, board, inspector.
Shapes and text
Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.
On screen: Rectangle tool → drag on the board.
To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.
On screen: Enter → Rental Kiosk → Esc.
Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.
On screen: Plus handle below → Docking Bay.
The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.
On screen: Shapes panel → search: cloud → Cloud.
Drag the cloud to the right of the kiosk, and type Back Office.
On screen: Drag the cloud right → Back Office.
Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.
On screen: O → drag → Rider.
Lines and arrows
Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.
On screen: A → the Line options bar.
Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.
On screen: Drag Rental Kiosk → Back Office.
An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.
On screen: Drag Back Office down.
For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.
On screen: A → Elbow → drag Docking Bay → Back Office.
Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.
On screen: Line section in the inspector.
Recap
To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.
In the next chapter, you shape a curved line and place labels on it.