과정의 장
교육 · 트랙 13. 화이트보드 · 13.4장 (전체 4장)
13.4 실시간 데이터, 모델 항목, 클립아트 3:17
셀을 실시간 표로 붙여넣고, 차트를 스프레드시트 셀에 연결하고, 도형을 모델 항목에 연결하거나 모델 항목으로 변환하고, 클립아트를 추가합니다.
Holarch 2.35 화면입니다.
학습 내용
- Excel의 셀을 실시간 스프레드시트 표로 붙여넣기
- 데이터 선택에서 차트를 스프레드시트 범위에 연결하기
- 스프레드시트의 값을 바꾸고 보드가 따라오는 것 확인하기
- 도형을 모델 항목에 연결하고, 도형을 새 항목으로 변환하기
- 클립아트 찾기, 별표 표시, 삽입하기
Bike-Share Dock 콘셉트 화이트보드를 마무리합니다. Excel의 dock 상태 셀을 실시간 스프레드시트 표로 붙여넣고, 데이터 선택으로 같은 셀에 가로 막대 차트를 연결하고, 스프레드시트에서 수치를 바꿔 표와 차트가 따라 바뀌는 것을 확인하고, 도형 하나를 모델의 Asset에 연결하고 다른 도형을 새 Asset으로 변환한 다음, 클립아트 패널에서 그림을 추가합니다.
실습
Bike-Share Dock에서 Holarch로 직접 해 보십시오.
- 이 장의 시작 파일과 Dock Concept 화이트보드를 엽니다. 보드 스트립에서 +를 클릭합니다.
- Excel에서 머리글 행이 있는 작은 셀 블록을 복사합니다. 보드를 클릭하고 ⌘V / Ctrl+V(또는 Ctrl+V)를 누른 다음 실시간 스프레드시트를 선택하고 붙여넣기를 클릭합니다.
- 가로 막대 차트를 삽입하고 데이터 선택… → 스프레드시트 범위에 연결…을 연 다음, 새 스프레드시트를 선택하고 범위를 입력한 뒤 연결, 이어서 확인을 클릭합니다.
- 표를 두 번 클릭하고 스프레드시트에서 숫자 하나를 바꾼 다음, 편집기 탭으로 보드로 돌아갑니다.
- Board 1에서 Rental Kiosk 도형을 선택하고 연결…을 클릭한 다음 Rental Kiosk Asset을 선택합니다. Rider를 선택하고 모델로 변환…을 클릭한 다음 Asset을 선택하고 변환을 클릭합니다.
- 클립아트를 열고
bicycle을 검색한 다음 그림 하나에 별표를 표시하고 클릭하여 삽입합니다.
표와 차트에 바꾼 숫자가 표시되고, 두 도형에 클래스 배지가 있고, 보드에 자전거 그림이 있으면 완료입니다.
스스로 확인
- 셀을 차트로 붙여넣는 것과 실시간 스프레드시트로 붙여넣는 것은 무엇이 다릅니까?
- 차트는 어떻게 스프레드시트 셀을 따라갑니까?
- 연결…과 모델로 변환…은 무엇이 다릅니까?
답 보기
셀을 차트로 붙여넣는 것과 실시간 스프레드시트로 붙여넣는 것은 무엇이 다릅니까?
차트는 값의 복사본을 유지하며 바뀌지 않습니다. 실시간 스프레드시트는 해당 셀로 스프레드시트를 만들고 셀과 함께 바뀌는 실시간 표로 보여 줍니다.
차트는 어떻게 스프레드시트 셀을 따라갑니까?
데이터 선택에서 스프레드시트 범위에 연결…로 연결합니다. 그러면 차트가 그 범위에서 그려집니다.
연결…과 모델로 변환…은 무엇이 다릅니까?
연결…은 도형을 이미 있는 항목에 묶습니다. 모델로 변환…은 도형의 텍스트를 이름으로 하는 새 항목을 도형에서 만들고 연결합니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Chapter four: live data, model items and clipart. A board can show figures that stay current, stand for items of the model, and use ready-made pictures.
In this chapter you finish the dock concept board.
Live data from pasted cells
Live data gets a board of its own. Click the plus in the Boards strip.
On screen: Boards strip → +.
The dock status is kept in a workbook: each station's docks, and the bikes available now. In Excel, select the cells and copy them.
On screen: Dock Status.xlsx.
Click the board, and press Command V, or Control V. Holarch asks how to paste the cells. Choose Live spreadsheet, and click Paste.
On screen: Click the board → ⌘V / Ctrl+V → Live spreadsheet → Paste.
Holarch creates a spreadsheet that holds the cells, and shows them on the board as a live table. Drag the table to the left.
On screen: The live table → drag it left.
A chart can follow the same cells. In the Tables and Charts panel, click Bar, and drag the chart beside the table.
On screen: Tables and Charts → Bar → drag it right.
Open Select Data, and click Link to Spreadsheet Range. Choose the new spreadsheet, type A1 to C5 as the range, and click Link.
On screen: Select Data… → Link to Spreadsheet Range… → A1:C5 → Link.
Select Data now names the linked range, and the chart shows the stations' docks and bikes. Click OK.
On screen: Linked range → OK.
The board follows the source
Now change a figure at its source. Double-click the table: its spreadsheet opens, with the cells selected.
On screen: Double-click the table → the spreadsheet.
Two more bikes are back at Riverside. In the Name Box, type C3 and press Enter, then type 6 in the formula bar, and press Enter.
On screen: Name Box C3 → formula bar 6 → Enter.
Go back to the board with its editor tab. The table and the chart already show six bikes at Riverside.
On screen: Editor tab → the board; the new value.
Model items on the board
Shapes on a board can stand for items of the model. Open Board 1, and select the rental kiosk.
On screen: Board 1 → select Rental Kiosk.
In the inspector's Model section, click Link to, search for Rental Kiosk, and choose the asset.
On screen: Link to… → Rental Kiosk (Asset).
The shape shows a badge, and the inspector names the linked asset. Click its name to see the asset's details in the side panel.
On screen: Badge; Model section → the asset.
A shape can also become a new item. Select the rider, and click Convert to Model. Choose Asset as the class, keep the name, and click Convert.
On screen: Rider → Convert to Model… → Asset → Convert.
The rider is now an asset of the model, linked to its shape, and listed in the Database with the other assets.
On screen: The linked Rider.
Clipart
Last, the Clipart panel: thousands of pictures and icons for concept graphics. Open it, and search for bicycle.
On screen: Clipart panel → search bicycle.
The star on a picture adds it to your favorites. Click a picture to add it to the board, and drag it below the rider.
On screen: Star → click the picture → drag it beside the rider.
Recap
To recap: paste cells as a live table, link charts to spreadsheet ranges in Select Data, link or convert shapes in the Model section, and add pictures from the Clipart panel.
That completes the whiteboard track. You can now sketch a concept with shapes and lines, chart its figures, keep them live, and tie the board to the model.
On screen: Track complete card, then end card.