कोर्स के अध्याय
प्रशिक्षण · ट्रैक 13. व्हाइटबोर्ड · 4 में से अध्याय 13.1
13.1 आकृतियां और रेखाएं 3:15
एक व्हाइटबोर्ड बनाएं, आकृतियां बनाएं, उनमें टाइप करें, और उन्हें रेखाओं और तीरों से जोड़ें।
Holarch 2.35 दिखाता है।
आप क्या सीखेंगे
- किसी प्रोजेक्ट में एक व्हाइटबोर्ड बनाएं
- टूलबार टूल, कुंजियों और आकृतियां पैनल से आकृतियां बनाएं
- किसी आकृति में टेक्स्ट टाइप करें और प्लस हैंडल से जुड़ी हुई कॉपियां जोड़ें
- रेखा विकल्प बार में चुने गए तीरों और कोहनी रेखाओं से आकृतियों को जोड़ें
Bike-Share Dock के लिए एक अवधारणा बोर्ड शुरू करें: एक व्हाइटबोर्ड बनाएं, टूलबार टूल और आकृतियां पैनल से आकृतियां बनाएं, उनमें टेक्स्ट टाइप करें, प्लस हैंडल से जुड़ी हुई कॉपियां जोड़ें, और आकृतियों को ऐसे तीरों और कोहनी रेखाओं से जोड़ें जिनका प्रकार, तीर के सिरे और शैली आप बनाने से पहले रेखा विकल्प बार में चुनते हैं।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
इसे Holarch में Bike-Share Dock पर स्वयं करें।
- अध्याय की शुरुआती फ़ाइल, या अपना कोई भी प्रोजेक्ट खोलें, और योजना → व्हाइटबोर्ड खोलें। + नया व्हाइटबोर्ड पर क्लिक करें और उसका नाम
Dock Conceptरखें। - आयत टूल पर क्लिक करें और एक बॉक्स खींचें। प्रविष्टि दबाएं,
Rental Kioskटाइप करें और Esc दबाएं। - बॉक्स चुना रहते हुए, उसके नीचे के प्लस हैंडल पर क्लिक करें और
Docking Bayटाइप करें। - आकृतियां पैनल में
cloudखोजें, उस पर क्लिक करें, उसे दाईं ओर खींचें औरBack Officeटाइप करें। O दबाएं, बाईं ओर एक दीर्घवृत्त बनाएं औरRiderटाइप करें। - Esc दबाएं, फिर A। कियोस्क से बैक ऑफ़िस तक खींचें। फिर से A दबाएं, रेखा विकल्प बार में कोहनी चुनें और डॉकिंग बे से बैक ऑफ़िस तक रेखा बनाएं।
- बैक ऑफ़िस को खिसकाएं और देखें कि दोनों रेखाएं साथ चलती हैं।
आपका काम तब पूरा है जब बोर्ड पर लेबल वाली चार आकृतियां, एक तीर और एक कोहनी रेखा है, और किसी आकृति को खिसकाने पर दोनों रेखाएं जुड़ी रहती हैं।
स्वयं जांचें
- A या O जैसी टूल कुंजी से पहले Esc क्यों दबाएं?
- किसी रेखा को बनाने से पहले उसका प्रकार और तीर के सिरे कहाँ चुनते हैं?
- जब आप किसी रेखा का सिरा कनेक्शन बिंदु के बजाय आकृति के भीतरी भाग पर छोड़ते हैं तो क्या होता है?
उत्तर दिखाएं
A या O जैसी टूल कुंजी से पहले Esc क्यों दबाएं?
जब कोई आकृति चुनी होती है, तो अक्षर उसमें टाइप होते हैं। Esc चयन हटाता है, इसलिए कुंजी टूल चुनती है।
किसी रेखा को बनाने से पहले उसका प्रकार और तीर के सिरे कहाँ चुनते हैं?
रेखा विकल्प बार में, जो रेखा या तीर टूल चुनने पर बोर्ड के ऊपर खुलता है।
जब आप किसी रेखा का सिरा कनेक्शन बिंदु के बजाय आकृति के भीतरी भाग पर छोड़ते हैं तो क्या होता है?
सिरा मुक्त रहता है: वह सबसे नज़दीकी किनारे से जुड़ता है और आकृतियों के खिसकने पर आकृति के चारों ओर घूमता है।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.
In this chapter you create the board, draw and label shapes, and connect them with lines.
A new whiteboard
Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.
On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.
The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.
On screen: The editor: toolbar, Shapes panel, board, inspector.
Shapes and text
Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.
On screen: Rectangle tool → drag on the board.
To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.
On screen: Enter → Rental Kiosk → Esc.
Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.
On screen: Plus handle below → Docking Bay.
The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.
On screen: Shapes panel → search: cloud → Cloud.
Drag the cloud to the right of the kiosk, and type Back Office.
On screen: Drag the cloud right → Back Office.
Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.
On screen: O → drag → Rider.
Lines and arrows
Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.
On screen: A → the Line options bar.
Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.
On screen: Drag Rental Kiosk → Back Office.
An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.
On screen: Drag Back Office down.
For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.
On screen: A → Elbow → drag Docking Bay → Back Office.
Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.
On screen: Line section in the inspector.
Recap
To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.
In the next chapter, you shape a curved line and place labels on it.