Holarch
과정의 장

교육 · 트랙 2. 요구사항과 검증 · 2.4장 (전체 6장)

2.4 베이스라인과 검토할 연결 2:40

명세서를 베이스라인으로 고정하고, 요구사항을 변경하고, 변경이 영향을 주는 것을 검토합니다.

Holarch 2.13 화면입니다.

학습 내용

  • 승인 기록과 함께 문서 베이스라인 저장하기
  • 승인된 요구사항을 변경하면 그 상태와 연결에 어떤 일이 생기는지 설명하기
  • 차이로 표시된 연결을 검토하고 메모와 함께 검토됨으로 표시하기
  • 베이스라인을 현재 버전과 비교하고 변경 사항 내보내기

Bike-Share Dock 명세서를 승인과 함께 베이스라인에 고정하고, 승인된 요구사항을 변경하여 요구사항이 검토로 돌아가고 연결이 검토 대상으로 표시되는 것을 확인하고, 연결을 검토하여 메모와 함께 검토됨으로 표시하고, 베이스라인 이후의 모든 변경을 나열합니다.

프로젝트 파일

  • 시작 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)
  • 완성 프로젝트 (.holarch.json; 프로젝트 관리 → 프로젝트 파일 ▾ → 프로젝트 가져오기 (.json)…)

동영상은 holarch.app에서 재생됩니다. 개인정보 처리방침을 참조하십시오.

실습

CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.

  1. EO-1 데모 프로젝트를 여십시오(또는 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)).
  2. EO-1 System Requirements Specification을 열고 제목 블록의 버전 ▾을 클릭한 다음 베이스라인 저장…을 선택합니다. 이름을 PDR Baseline으로 지정하고, 승인자 행 하나에 이름과 역할을 입력한 다음 만들기를 클릭합니다.
  3. 3.3 Depth of Discharge의 설명에서 30%를 25%로 바꾸고 알림 메시지를 읽습니다. 요구사항이 다시 검토 중 상태가 되었고 연결의 검토가 필요합니다.
  4. 니즈 및 요구사항 → 검토할 연결을 엽니다. 3.3의 행에서 차이를 클릭한 다음 검토됨으로 표시…를 클릭하고, 확인한 내용을 적고 검토됨으로 표시를 클릭합니다.
  5. 문서에서 버전 ▾ → 버전 비교…를 선택하고 From을 PDR Baseline으로, To를 현재 버전으로 설정한 다음 변경 사항 (Excel)을 클릭합니다.
  6. 통제 및 검토 → 베이스라인 및 버전을 열고 SRR Baseline 옆의 PDR Baseline을 찾습니다. 문서 하나가 아니라 모델 전체를 고정하려면 이 페이지 머리글의 + 베이스라인 저장…을 사용합니다.

PDR Baseline 기준의 변경 보고서에 3.3 편집이 나열되고, 검토한 연결이 검토할 연결에 더 이상 나타나지 않으면 완료입니다.

스스로 확인

  1. 요구사항을 변경하면 요구사항만이 아니라 그에 의존하는 연결이 표시되는 이유는 무엇입니까?
  2. 문서 베이스라인과 프로젝트 베이스라인의 차이는 무엇입니까?
  3. 연결을 검토됨으로 표시할 때 메모를 쓰는 이유는 무엇입니까?
답 보기
  1. 요구사항을 변경하면 요구사항만이 아니라 그에 의존하는 연결이 표시되는 이유는 무엇입니까?

    반대쪽 끝의 항목, 예를 들어 요구사항을 충족하는 기능이나 검증하는 테스트는 이전 텍스트를 기준으로 확인되었습니다. 각 연결이 여전히 유효한지 다시 확인해야 합니다.

  2. 문서 베이스라인과 프로젝트 베이스라인의 차이는 무엇입니까?

    문서 베이스라인은 문서 하나와 그 승인을 고정합니다(버전 ▾ → 베이스라인 저장…). 프로젝트 베이스라인은 모든 항목과 관계를 고정합니다(베이스라인 및 버전 → + 베이스라인 저장…).

  3. 연결을 검토됨으로 표시할 때 메모를 쓰는 이유는 무엇입니까?

    메모는 무엇을 확인했고 왜 연결이 여전히 유효한지 기록합니다. 메모는 연결된 항목의 댓글에 추가되므로, 검토자가 나중에 결정을 따라갈 수 있습니다.

더 읽어 보기

대본

대본 보기 (내레이션과 화면 내용)

Introduction

Chapter four: baselines and links to review. Once a specification is agreed, changes need control: everyone should know what changed, and what the change might break.

We baseline the Bike-Share Dock specification, then change one of its requirements.

Change control

A baseline is a read-only snapshot of a document, with its approvals. After it, every change is visible, and a change to a requirement marks the links that depend on it for review, until someone checks them.

On screen: Card: baselines and links to review.

First, give Show Available Bikes a link to depend on. In the Database, select it, and in its Trace section link it with satisfied by to the rental kiosk, which shows the numbers.

On screen: 4.1.1 → Trace → satisfied by + → Link existing… → Rental Kiosk.

Baseline

Open the specification, and the version menu in its title block. Choose Save Baseline, name it SRR Baseline for the requirements review, add your role, and click Create.

On screen: SRS → Current version ▾ → Save Baseline… → SRR Baseline → Create.

A change

Now a change. The team wants the kiosk to show the charge level of each e-bike too. Select Show Available Bikes, and update its statement in the inspector.

On screen: 4.1.1 → Item → new description.

The message says what happened, in the same undo step as the edit: the approved requirement went back to In Review, and its link to the rental kiosk now needs review.

On screen: The toast and the status.

Links to review

Open Needs and Requirements, then Links to Review. Each row is a link to check. Diff shows exactly how the text changed.

On screen: Links to Review → Diff.

The rental kiosk can show charge levels too, so the link still holds. Click Mark Reviewed, write what you checked, and click Mark Reviewed. The link no longer needs review.

On screen: Mark Reviewed… → note → Mark Reviewed.

Changes since the baseline

To see everything that changed since the review, open the specification's version menu again, and choose Compare Versions: from SRR Baseline to the current version.

On screen: SRS → version ▾ → Compare Versions… → SRR Baseline → Current.

The report lists each addition, removal and edit, ready to export to Excel or as a Word redline for a change board.

On screen: The change report.

Recap

Let's recap. You baselined the specification with an approval, changed an approved requirement, saw it return to review with its link flagged, marked the link reviewed with a note, and listed the changes since the baseline.

Next, you plan and run the tests that verify the requirements.