Holarch
Capitoli del corso

Formazione · Percorso 13. Lavagne · Capitolo 13.1 di 4

13.1 Forme e linee 3:15

Creare una lavagna, disegnare forme, scrivervi dentro e collegarle con linee e frecce.

Mostra Holarch 2.35.

Tutti i capitoli · 13.2 Curve ed etichette delle linee →

Che cosa si impara

  • Creare una lavagna in un progetto
  • Disegnare forme con gli strumenti della barra degli strumenti, i tasti e il pannello Forme
  • Scrivere testo in una forma e aggiungere copie collegate con le maniglie con il segno più
  • Collegare le forme con frecce e linee a gomito scelte nella barra delle opzioni della linea

Iniziare una tavola di concept per la Bike-Share Dock: creare una lavagna, disegnare forme con gli strumenti della barra degli strumenti e il pannello Forme, scrivervi del testo, aggiungere copie collegate con le maniglie con il segno più e collegare le forme con frecce e linee a gomito di cui si scelgono tipo, punte di freccia e stile nella barra delle opzioni della linea prima di disegnare.

File di progetto

  • Progetto iniziale (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)
  • Progetto completato (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)

Il video viene riprodotto da holarch.app; vedere l’Informativa sulla privacy.

Esercitazione

Provare in prima persona in Holarch, su Bike-Share Dock.

  1. Aprire il file iniziale del capitolo, o un qualsiasi proprio progetto, e aprire Pianifica → Lavagne. Fare clic su + Nuova lavagna e chiamarla Dock Concept.
  2. Fare clic sullo strumento rettangolo e trascinare un riquadro. Premere Invio, digitare Rental Kiosk e premere Esc.
  3. Con il riquadro selezionato, fare clic sulla maniglia con il segno più sotto di esso e digitare Docking Bay.
  4. Nel pannello Forme, cercare cloud, fare clic sulla forma, trascinarla a destra e digitare Back Office. Premere O, disegnare un’ellisse a sinistra e digitare Rider.
  5. Premere Esc, poi A. Trascinare dal chiosco al back office. Premere di nuovo A, scegliere A gomito nella barra delle opzioni della linea e disegnare dal vano di aggancio al back office.
  6. Spostare il back office e osservare che entrambe le linee lo seguono.

L’esercizio è completato quando la tavola contiene quattro forme con etichetta, una freccia e una linea a gomito, ed entrambe le linee restano collegate quando si sposta una forma.

Verifica

  1. Perché premere Esc prima di un tasto strumento come A o O?
  2. Dove si scelgono il tipo di una linea e le punte di freccia prima di disegnarla?
  3. Che cosa succede quando si rilascia l’estremità di una linea sul corpo di una forma anziché su un punto di connessione?
Mostra le risposte
  1. Perché premere Esc prima di un tasto strumento come A o O?

    Quando una forma è selezionata, le lettere vengono digitate al suo interno. Esc annulla la selezione, quindi il tasto sceglie lo strumento.

  2. Dove si scelgono il tipo di una linea e le punte di freccia prima di disegnarla?

    Nella barra delle opzioni della linea, che si apre sopra la tavola quando si sceglie uno strumento linea o freccia.

  3. Che cosa succede quando si rilascia l’estremità di una linea sul corpo di una forma anziché su un punto di connessione?

    L’estremità resta libera: si collega al lato più vicino e si sposta attorno alla forma quando le forme si muovono.

Per saperne di più

Trascrizione

Mostra la trascrizione (narrazione e contenuto dello schermo)

Introduction

Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.

In this chapter you create the board, draw and label shapes, and connect them with lines.

A new whiteboard

Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.

On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.

The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.

On screen: The editor: toolbar, Shapes panel, board, inspector.

Shapes and text

Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.

On screen: Rectangle tool → drag on the board.

To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.

On screen: Enter → Rental Kiosk → Esc.

Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.

On screen: Plus handle below → Docking Bay.

The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.

On screen: Shapes panel → search: cloud → Cloud.

Drag the cloud to the right of the kiosk, and type Back Office.

On screen: Drag the cloud right → Back Office.

Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.

On screen: O → drag → Rider.

Lines and arrows

Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.

On screen: A → the Line options bar.

Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.

On screen: Drag Rental Kiosk → Back Office.

An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.

On screen: Drag Back Office down.

For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.

On screen: A → Elbow → drag Docking Bay → Back Office.

Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.

On screen: Line section in the inspector.

Recap

To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.

In the next chapter, you shape a curved line and place labels on it.