Holarch
课程章节

培训 · 课程 13. 白板 · 第 13.1 章,共 4 章

13.1 形状和线条 3:15

创建白板,绘制形状,在其中输入文字,并用线条和箭头连接。

演示 Holarch 2.35。

您将学到

  • 在项目中创建白板
  • 用工具栏工具、快捷键和“形状”面板绘制形状
  • 在形状中输入文字,并用加号手柄添加相连的副本
  • 用在“线条选项”栏中选择的箭头和肘形线连接形状

为 Bike-Share Dock 开始一块概念画板:创建白板,用工具栏工具和“形状”面板绘制形状,在其中输入文字,用加号手柄添加相连的副本,并用箭头和肘形线连接形状,线条的类型、箭头和样式在绘制前于“线条选项”栏中选择。

项目文件

  • 起始项目 (.holarch.json;管理项目 → 项目文件 ▾ → 导入项目 (.json)…)
  • 完成项目 (.holarch.json;管理项目 → 项目文件 ▾ → 导入项目 (.json)…)

视频从 holarch.app 播放;参见隐私政策。

练习

在 Holarch 中基于 Bike-Share Dock 亲自完成此操作。

  1. 打开本章的起始文件或您自己的任意项目,然后打开 计划 → 白板。单击 + 新建白板,命名为 Dock Concept。
  2. 单击矩形工具并拖出一个方框。按 Enter,输入 Rental Kiosk,然后按 Esc。
  3. 选中方框,单击其下方的加号手柄,并输入 Docking Bay。
  4. 在 形状 面板中搜索 cloud,单击它,拖到右侧并输入 Back Office。按 O,在左侧绘制一个椭圆并输入 Rider。
  5. 按 Esc,然后按 A。从 kiosk 拖到 back office。再次按 A,在“线条选项”栏中选择 肘形,从 docking bay 画到 back office。
  6. 移动 back office,观察两条线都随之移动。

当画板上有四个带标签的形状、一个箭头和一条肘形线,且移动形状时两条线保持连接时,即完成练习。

自测

  1. 为什么在按 A 或 O 等工具键之前要按 Esc?
  2. 在绘制线条之前,在哪里选择线条类型和箭头?
  3. 将线端释放在形状的主体上而不是连接点上时,会怎样?
显示答案
  1. 为什么在按 A 或 O 等工具键之前要按 Esc?

    选中形状时,输入的字母会写入形状。Esc 清除选择,因此该键用于选择工具。

  2. 在绘制线条之前,在哪里选择线条类型和箭头?

    在“线条选项”栏中,选择线条或箭头工具时它会在画板上方打开。

  3. 将线端释放在形状的主体上而不是连接点上时,会怎样?

    线端浮动:它吸附到最近的一侧,并随形状移动而绕形状移动。

延伸阅读

文字稿

显示文字稿 (旁白和屏幕内容)

Introduction

Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.

In this chapter you create the board, draw and label shapes, and connect them with lines.

A new whiteboard

Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.

On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.

The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.

On screen: The editor: toolbar, Shapes panel, board, inspector.

Shapes and text

Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.

On screen: Rectangle tool → drag on the board.

To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.

On screen: Enter → Rental Kiosk → Esc.

Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.

On screen: Plus handle below → Docking Bay.

The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.

On screen: Shapes panel → search: cloud → Cloud.

Drag the cloud to the right of the kiosk, and type Back Office.

On screen: Drag the cloud right → Back Office.

Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.

On screen: O → drag → Rider.

Lines and arrows

Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.

On screen: A → the Line options bar.

Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.

On screen: Drag Rental Kiosk → Back Office.

An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.

On screen: Drag Back Office down.

For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.

On screen: A → Elbow → drag Docking Bay → Back Office.

Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.

On screen: Line section in the inspector.

Recap

To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.

In the next chapter, you shape a curved line and place labels on it.