과정의 장
교육 · 트랙 7. 프로세스 따르기 · 7.1장 (전체 4장)
7.1 프로세스 가이드 선택 3:08
시스템 엔지니어링 수명 주기에 따라 프로젝트를 진행합니다.
Holarch 2.41 화면입니다.
학습 내용
- 여섯 가지 프로세스 가이드와 각각의 근거가 된 출처 비교하기
- 프로젝트에 프로세스 가이드 켜기
- 가이드의 수명 주기, 단계, 스텝 카드 또는 프로세스 카드 읽기
- 각 가이드의 진행 위치를 잃지 않고 가이드 간 전환하기
Bike-Share Dock 프로젝트에 Holarch의 SE 프로세스 가이드를 켭니다. 선택할 수 있는 여섯 가지 프로세스(Kossiakoff SE 방법, ISO/IEC/IEEE 15288, NASA 프로젝트 수명 주기, DoD 획득 수명 주기, MIL-STD-499B 프로세스 루프, V 모델), 스테이지와 단계가 있는 수명 주기, 단계의 스텝, 그리고 위치를 잃지 않고 프로세스 간 전환하는 방법을 다룹니다.
실습
CubeSat EO-1 데모 프로젝트에서 Holarch로 직접 해 보십시오.
- EO-1 데모 프로젝트를 여십시오(없으면 만드십시오: 프로젝트 관리 → 프로젝트 파일 ▾ → 새 데모 프로젝트 → CubeSat (Guided systems engineering)). 레일에서 계획 → SE 프로세스를 엽니다.
- 목록에서 V 모델을 선택한 다음 DoD acquisition life cycle을 선택하고, 각각의 요약과 출처를 읽습니다.
- ISO/IEC/IEEE 15288을 선택하고 이 프로세스 사용을 클릭합니다.
- Concept 스테이지를 읽습니다. 기술 프로세스 카드와 그 뒤의 기술 관리 프로세스를 읽고, EO-1이 이미 충족하는 검사를 확인합니다.
- 프로세스에서 V 모델로 전환하여 첫 단계를 본 다음, 다시 ISO/IEC/IEEE 15288로 전환합니다.
SE 프로세스 페이지에 ISO/IEC/IEEE 15288이 표시되고 Concept 스테이지가 현재로 표시되면 완료입니다.
스스로 확인
- 프로세스 가이드를 켜면 모델이 바뀝니까?
- 한 가이드에서 다른 가이드로 전환했다가 돌아옵니다. 체크 표시와 게이트는 어떻게 됩니까?
- 가이드 중에서 어떻게 선택합니까?
답 보기
프로세스 가이드를 켜면 모델이 바뀝니까?
아닙니다. 가이드는 모델을 읽고 각 단계에 아직 무엇이 필요한지 보여 줍니다. 선택한 프로세스는 프로젝트와 함께 저장되어 구성원과 공유되며, ⌘Z / Ctrl+Z로 실행 취소할 수 있습니다.
한 가이드에서 다른 가이드로 전환했다가 돌아옵니다. 체크 표시와 게이트는 어떻게 됩니까?
각 프로세스는 자체의 현재 단계, 체크한 검사, 게이트를 유지하므로, 다시 전환하면 있던 곳으로 돌아갑니다.
가이드 중에서 어떻게 선택합니까?
프로그램이나 과정이 따르는 것을 고르십시오. 각 가이드의 구조는 NASA 수명 주기의 NPR 7123.1처럼 그 아래에 명시된 출처를 따릅니다. 설명과 검사는 Holarch가 직접 작성한 것입니다.
더 읽어 보기
대본
대본 보기 (내레이션과 화면 내용)
Introduction
Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.
In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.
The process guides
Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.
On screen: Plan & Deliver → SE Process.
There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.
On screen: The six processes.
Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.
On screen: Select NASA project life cycle; its intro and sources.
Turn on a guide
For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.
On screen: Select Kossiakoff SE method → Use This Process.
Life cycle, phases and steps
The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.
On screen: The life cycle: stages, phases, percentages, Current.
Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.
On screen: Phase card: Needs analysis and its aim.
Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.
On screen: The four step cards.
Switch guides
A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.
On screen: Process ▾ → ISO/IEC/IEEE 15288.
Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.
On screen: Process ▾ → Kossiakoff SE method.
Recap
Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.
Next, you work through the checks of the first phase.