Kurs bölümleri
Eğitim · Kurs 13. Beyaz tahtalar · Bölüm 13.1 / 4
13.1 Şekiller ve çizgiler 3:15
Bir beyaz tahta oluşturun, şekiller çizin, içlerine yazın ve onları çizgiler ve oklarla bağlayın.
Holarch 2.35 sürümünü gösterir.
Neler öğreneceksiniz
- Bir projede bir beyaz tahta oluşturun
- Araç çubuğu araçlarıyla, tuşlarla ve Şekiller paneliyle şekiller çizin
- Bir şeklin içine metin yazın ve artı tutamaçlarıyla bağlı kopyalar ekleyin
- Şekilleri Çizgi seçenekleri çubuğunda seçilen oklar ve dirsek çizgileriyle bağlayın
Bike-Share Dock için bir konsept panosu başlatın: bir beyaz tahta oluşturun, araç çubuğu araçlarıyla ve Şekiller paneliyle şekiller çizin, içlerine metin yazın, artı tutamaçlarıyla bağlı kopyalar ekleyin ve şekilleri, türünü, ok uçlarını ve stilini çizmeden önce Çizgi seçenekleri çubuğunda seçtiğiniz oklar ve dirsek çizgileriyle bağlayın.
Proje dosyaları
- Başlangıç projesi (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
- Bitmiş proje (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
Video holarch.app'ten oynatılır; bkz. Gizlilik Politikası.
Alıştırma
Bunu Holarch'ta, Bike-Share Dock üzerinde kendiniz yapın.
- Bölümün başlangıç dosyasını veya kendinize ait herhangi bir projeyi açın ve Plan → Beyaz tahtalar'ı açın. + Yeni beyaz tahta'ya tıklayın ve adını
Dock Conceptkoyun. - Dikdörtgen aracına tıklayın ve bir kutu sürükleyin. Giriş'a basın,
Rental Kioskyazın ve Esc'e basın. - Kutu seçiliyken altındaki artı tutamacına tıklayın ve
Docking Bayyazın. - Şekiller panelinde
cloudaraması yapın, sonuca tıklayın, sağa sürükleyin veBack Officeyazın. O'ya basın, sola bir elips çizin veRideryazın. - Esc'e, ardından A'ya basın. Kiosktan arka ofise sürükleyin. Yeniden A'ya basın, Çizgi seçenekleri çubuğunda Dirsek'i seçin ve yerleştirme yuvasından arka ofise çizin.
- Arka ofisi taşıyın ve iki çizginin de onu izlediğini görün.
Panoda etiketli dört şekil, bir ok ve bir dirsek çizgisi olduğunda ve bir şekli taşıdığınızda iki çizgi de bağlı kaldığında işiniz bitmiştir.
Kendinizi sınayın
- A veya O gibi bir araç tuşundan önce neden Esc'e basılmalı?
- Bir çizgiyi çizmeden önce türünü ve ok uçlarını nerede seçersiniz?
- Bir çizginin ucunu bir bağlantı noktası yerine bir şeklin gövdesine bıraktığınızda ne olur?
Yanıtları göster
A veya O gibi bir araç tuşundan önce neden Esc'e basılmalı?
Bir şekil seçiliyken harfler onun içine yazılır. Esc seçimi temizler, böylece tuş aracı seçer.
Bir çizgiyi çizmeden önce türünü ve ok uçlarını nerede seçersiniz?
Bir çizgi veya ok aracı seçtiğinizde panonun üstünde açılan Çizgi seçenekleri çubuğunda.
Bir çizginin ucunu bir bağlantı noktası yerine bir şeklin gövdesine bıraktığınızda ne olur?
Uç serbest kalır: en yakın kenara bağlanır ve şekiller hareket ettikçe şeklin çevresinde dolaşır.
Daha fazla bilgi
Döküm
Dökümü göster (anlatım ve ekranda görünenler)
Introduction
Welcome to the whiteboard track. A whiteboard is a free drawing surface inside a project, for concept sketches, workshop notes and review graphics, that you can connect to the model. Across four chapters you build a concept board for the Bike-Share Dock.
In this chapter you create the board, draw and label shapes, and connect them with lines.
A new whiteboard
Open Plan, then Whiteboards, and click New Whiteboard. Name it Dock Concept.
On screen: Plan → Whiteboards → + New Whiteboard → Dock Concept.
The editor opens on an empty board. The toolbar holds the drawing tools, the Shapes panel is on the left, and the inspector on the right shows the properties of whatever you select. A board has no edges: pan and zoom as far as you need.
On screen: The editor: toolbar, Shapes panel, board, inspector.
Shapes and text
Click the rectangle tool, and drag on the board to draw a box the size you want. When you release, the tool goes back to Select, with the new shape selected.
On screen: Rectangle tool → drag on the board.
To give the shape text, press Enter, or start typing. Type Rental Kiosk, then press Escape to finish.
On screen: Enter → Rental Kiosk → Esc.
Each selected shape shows a plus handle on each side. Click the one below: Holarch adds a copy underneath, joined by a line, and opens it for typing. Type Docking Bay.
On screen: Plus handle below → Docking Bay.
The Shapes panel holds many more shapes, in groups: basic shapes, flowchart, arrows, callouts and systems thinking. Search for cloud, and click it to add it in the middle of the view.
On screen: Shapes panel → search: cloud → Cloud.
Drag the cloud to the right of the kiosk, and type Back Office.
On screen: Drag the cloud right → Back Office.
Press the O key for the ellipse tool, and draw the rider on the left. Type Rider.
On screen: O → drag → Rider.
Lines and arrows
Now connect them. Press the A key for the arrow tool. The Line options bar opens above the board. It sets the next line before you draw it: its type, its arrowheads, its color, weight and dash.
On screen: A → the Line options bar.
Point at the kiosk: its connection points show. Drag from the kiosk to the back office and release on its body. The arrow is attached at both ends.
On screen: Drag Rental Kiosk → Back Office.
An end released on the body floats to the nearest side. Move the back office down, and the arrow follows it.
On screen: Drag Back Office down.
For a different line, choose it in the Line options bar before you draw. Press the A key again, choose Elbow, and draw from the docking bay to the back office. An elbow line meets the shapes at right angles and routes around them.
On screen: A → Elbow → drag Docking Bay → Back Office.
Select any line to change it later. The inspector's Line section groups its stroke, its shape, its ends and its labels.
On screen: Line section in the inspector.
Recap
To recap: draw with the tools or the Shapes panel, type to give a shape text, use the plus handles for connected copies, and choose the line in the Line options bar before you draw it.
In the next chapter, you shape a curved line and place labels on it.